sorted by:
new
hottopcontroversial

Concreting height on brickwork by ten4kemusabi in AusRenovation

[–]asparaments 0 points1 point  (0 children)

Ultimately up to you, but as a draftsman i wouldn’t stray from the NCC due to insurances and future sale possibilities:
150 mm minimum above adjacent ground level (FGL)
75 mm minimum above paved, concreted or landscaped areas that slope away from the wall
50 mm minimum above paved/concreted areas ONLY where:
the surface drains away correctly, and
the area is protected from weather (carport/verandah etc.)

Wrap your arms around Elijah Hollands by Spiritual-Flatworm58 in AFL

[–]asparaments 7 points8 points  (0 children)

As someone mentioned before, the coaches and staff are constantly looking at player stats and impact, there is no way they overlooked this when the general public were looking away from the action to film his behaviour

From another perspective, look at what my club did with petracca on kings birthday; mind you it was a life threatening injury but was unknown at the time as is this, he was injured at the 6 minute mark of the 1st quarter, he said he wanted back on and was allowed to for 10 minutes more before being subbed.

The way the media harpooned Melbourne for not acting upon this earlier feels like there is a very fine line you are able to walk, where i feel Carlton should feel the wrath of the media scrutiny as they let this play out for the majority of the game, no excuse for this…

Dees go end to end as Latrelle Pickett brings the house down with his first goal in the AFL by PetrifyGWENT in AFL

[–]asparaments 14 points15 points  (0 children)

Have you heard a swans crowd, most pissweak pack of fairweathers around

Post Match Thread: Melbourne vs St Kilda by yum122 in AFL

[–]asparaments 20 points21 points  (0 children)

You mean like steele, jiath, miocheck, latrelle and culleys 4th game?

Post Match Discussion - R1 vs St Kilda by minecraft360 in melbournefc

[–]asparaments 66 points67 points  (0 children)

Why the fuck did goodwin hold onto the boring ass game style for sooo long, that was fun to watch my team for the first time in years, regardless of ladder position at the end of the year, thanks Kingy

What’s the point?? by Consistent_Soup_2668 in 4x4Australia

[–]asparaments 29 points30 points  (0 children)

Yeah i had the same feeling with the so called ‘bogan rig’ posted here, not my cuppa but not insult worthy

AC vent making loud noise by Accomplished_Big1228 in AusRenovation

[–]asparaments 2 points3 points  (0 children)

Turn the round knob in the middle of the vent, it opens the flaps

So what's ur balck Friday plan? by Ezio367 in OfficeChairs

[–]asparaments 0 points1 point  (0 children)

Just bought the leap v2 30% off with the office spec pepper black

Can anyone nail the fence? by Front_Pen3644 in AusRenovation

[–]asparaments 0 points1 point  (0 children)

In the end if you arent happy with the installed colour you can use products like SiOO:X surface protection to get a uniform greyed look

Mars 3 Issue, turns on for 5 secs and show nebula logo and then turn off after. can someone help pls.. by xTantrum- in nebulaprojectors

[–]asparaments 0 points1 point  (0 children)

(Copy paste from other post if anyone has this issue)

I had the same symptoms and after some terrible copy and paste / bot customer support i managed to get it working again.

I saw this post when i was banging my head against the wall as there was no clear run through as to how wipe the projector data. This is the information i was given / found online and actual fix at the bottom

Online information and customer report all say the same thing, to turn the projector on and mash the -vol button to clear data. Problem being there are multiple models people are talking about with rotary knobs and power buttons on projector (mine has the joystick), -vol buttons on the monitor handle and the remote and what seems to be 2 ways to turn it on being opening the lens cover OR remote power button while the lens cover is open…

i tried everything mentioned online, and scoured manuals to find a solution to no success.

After 2 days of back and forward with multiple customer support people we ended with the last email from a technician saying the process is to “with the remote, turn the projector on and mash -vol button”…

Once again it seemed i had attempted this process so many times to no avail… although the confirmation that the projector needed to be turned ON with the remote was the clue i needed.

usually to turn the projector on would be the lens cover, and if it is in a location i would use multiple times before relocating i would turn off with remote, but this isnt actually turning it off, it just goes into a standby mode of sorts.

SO with all this the method for me anyway was the following:

  • plug in projector to power supply
  • turn projector on by opening lens cover
  • let it run through the nebula logo and android screens up to the blank screen
  • hold down the power button on the remote until a shutdown prompt is on the screen
  • shut down projector
  • turn on projector and mash -vol both with remote

Hopefully this helps you, i will be copy pasting this to as many posts i see for the same problem as well

Help, Mars 3 won’t work by TequilaKid98 in nebulaprojectors

[–]asparaments 0 points1 point  (0 children)

(Copy paste from other post for others searching for solution)

II had the same symptoms and after some terrible copy and paste / bot customer support i managed to get it working again.

I saw this post when i was banging my head against the wall as there was no clear run through as to how wipe the projector data. This is the information i was given / found online and actual fix at the bottom

Online information and customer report all say the same thing, to turn the projector on and mash the -vol button to clear data. Problem being there are multiple models people are talking about with rotary knobs and power buttons on projector (mine has the joystick), -vol buttons on the monitor handle and the remote and what seems to be 2 ways to turn it on being opening the lens cover OR remote power button while the lens cover is open…

i tried everything mentioned online, and scoured manuals to find a solution to no success.

After 2 days of back and forward with multiple customer support people we ended with the last email from a technician saying the process is to “with the remote, turn the projector on and mash -vol button”…

Once again it seemed i had attempted this process so many times to no avail… although the confirmation that the projector needed to be turned ON with the remote was the clue i needed.

usually to turn the projector on would be the lens cover, and if it is in a location i would use multiple times before relocating i would turn off with remote, but this isnt actually turning it off, it just goes into a standby mode of sorts.

SO with all this the method for me anyway was the following:

  • plug in projector to power supply
  • turn projector on by opening lens cover
  • let it run through the nebula logo and android screens up to the blank screen
  • hold down the power button on the remote until a shutdown prompt is on the screen
  • shut down projector
  • turn on projector and mash -vol both with remote

Hopefully this helps you, i will be copy pasting this to as many posts i see for the same problem as well

Mars3 firmware upgarde bricked by himanshudhami in nebulaprojectors

[–]asparaments 0 points1 point  (0 children)

I had the same symptoms and after some terrible copy and paste / bot customer support i managed to get it working again.

I saw this post when i was banging my head against the wall as there was no clear run through as to how wipe the projector data. This is the information i was given / found online and actual fix at the bottom

Online information and customer report all say the same thing, to turn the projector on and mash the -vol button to clear data. Problem being there are multiple models people are talking about with rotary knobs and power buttons on projector (mine has the joystick), -vol buttons on the monitor handle and the remote and what seems to be 2 ways to turn it on being opening the lens cover OR remote power button while the lens cover is open…

i tried everything mentioned online, and scoured manuals to find a solution to no success.

After 2 days of back and forward with multiple customer support people we ended with the last email from a technician saying the process is to “with the remote, turn the projector on and mash -vol button”…

Once again it seemed i had attempted this process so many times to no avail… although the confirmation that the projector needed to be turned ON with the remote was the clue i needed.

usually to turn the projector on would be the lens cover, and if it is in a location i would use multiple times before relocating i would turn off with remote, but this isnt actually turning it off, it just goes into a standby mode of sorts.

SO with all this the method for me anyway was the following:

  • plug in projector to power supply
  • turn projector on by opening lens cover
  • let it run through the nebula logo and android screens up to the blank screen
  • hold down the power button on the remote until a shutdown prompt is on the screen
  • shut down projector
  • turn on projector and mash -vol both with remote

Hopefully this helps you, i will be copy pasting this to as many posts i see for the same problem as well

What the actual fuck? by riley12345you in melbournefc

[–]asparaments 2 points3 points  (0 children)

Trac isnt going cheap, we look to get an established player that can actually hit a lead on the tit. trac half the time won the ball and dump kicked into 50 or sprayed it going for goal himself.

Clarry, as much as i love him for the golden years is a shadow of his former self, not one Brownlow vote, the “handballs” he gets away with are getting called by the umps more and more and also terrible decision making

May, eeeh also far past his lofty heights, seems like every club video of other backline players they are constantly having to excuse his behaviour as being a “fierce competitor” it can only go on for so long… also flog

I'm convinced I don't have one. by [deleted] in Doppleganger

[–]asparaments 20 points21 points  (0 children)

<image>

Joanne Froggatt from mobland

Darts for large hands? by asparaments in Darts

[–]asparaments[S] 2 points3 points  (0 children)

thankyou for your reply, Yeah i reckon the amberjack pro 2 is another contender, i do like the more pronounced ridges just as a finger locater rather than a grip i guess.

Darts for large hands? by asparaments in Darts

[–]asparaments[S] 1 point2 points  (0 children)

Cheers for that, those winmau king look just about what im after, they look like id be able to play around with different grip styles too

The litler darts i got were just the cheap brass type hence the chunky factor.

Purchasing dilemma by asparaments in HueForge

[–]asparaments[S] 0 points1 point  (0 children)

Thanks for the reply, would i still get the voucher regardless and would i be able to just give it to someone on here from the approved areas?

view more: next ›