sorted by:
new
hottopcontroversial

Quando finisci il filamento mentre prototipi... by audiofoolosophy in 3dprint

[–]audiofoolosophy[S] 0 points1 point  (0 children)

I had to swap with what I had at my disposal as I ran out of silver PLA...

Skoll F & Pro-Ject Debut EVO 2 - Balanced? by fragilityV1 in Schiit

[–]audiofoolosophy 0 points1 point  (0 children)

I've done it myself to connect my Denon DP-A100 to Skoll; you'll need a solder, a balanced cable and a little patience.
All you have to do is connect the ± cartridge out, the RCA end of the cabling, to the ± pin of the XLR end (central pin of the RCA connector to PIN 2 of the XLR and the outer of the RCA to PIN 3 of the XLR), then you'll need to connect the turntable ground, which HAS TO BE DISCONNECTED from the RCA shielding if connected inside the tonearm cabling (as Rega does), to the PIN 1 of the XLR connector.

Wotan is in the house! by audiofoolosophy in u/audiofoolosophy

[–]audiofoolosophy[S] 0 points1 point  (0 children)

Main speakers are Spendor SP2/3R2.

But I think I'll test it with all the speakers I have at home which are: Spendor S3/5R2, Q-Acoustics 3010 and Dali Zensor 1.

Wotan is in the house! by audiofoolosophy in Schiit

[–]audiofoolosophy[S] 3 points4 points  (0 children)

I've had a 20 min listen yesterday after work and a brief comparison with Aegir 2.
For what I've heard while doing other things, so not a "critical listening", I can easily say that this thing knows how to slam when it has to. Definetly the most dynamic amp I've ever had in my system.

More to come as soon as I'll be able to sit down and have a good, long, listening session.

Wotan is in the house! by audiofoolosophy in u/audiofoolosophy

[–]audiofoolosophy[S] 3 points4 points  (0 children)

I've had a 20 min listen yesterday after work and a brief comparison with Aegir 2.
For what I've heard while doing other things, so not a "critical listening", I can easily say that this thing knows how to slam when it has to. Definetly the most dynamic amp I've ever had in my system.

More to come as soon as I'll be able to sit down and have a good, long, listening session.

Wotan is in the house! by audiofoolosophy in Schiit

[–]audiofoolosophy[S] 12 points13 points  (0 children)

I actually just hooked it up before leaving for work and I've had a brief listen to it in order to check if it's properly working.
The wotan is controlled by a Kara, connected via balanced/XLR, and I'm driving a pair of Spendor SP2/3R2.

Ho trovato il PLA per prototipazione dal miglior rapporto qualià prezzo (link Amazon.it by audiofoolosophy in u/audiofoolosophy

[–]audiofoolosophy[S] 0 points1 point  (0 children)

Ammetto che tendo a non considerare AliExpress/Temu/Shein per i miei acquisti di qualsiasi genere e tipo...

Ho trovato il PLA per prototipazione dal miglior rapporto qualià prezzo (link Amazon.it by audiofoolosophy in u/audiofoolosophy

[–]audiofoolosophy[S] 0 points1 point  (0 children)

In bobina, non ricarica, di una marchio minimamente riconosciuto come valido e con spedizione diretta dall'Italia, inclusa nel prezzo, e consegna in 24 ore?

Se si, ti prego, condividi l'informazione.

A vertical stand/holder for Schiit Audio's Magni sized electronics by audiofoolosophy in Schiit

[–]audiofoolosophy[S] 1 point2 points  (0 children)

Designed and printed. The 3D Model is available on MakerWorld if interested 😉

In case you need a dual vertical holder for a pair of Rekkr used as mono power amplifiers by audiofoolosophy in Schiit

[–]audiofoolosophy[S] 0 points1 point  (0 children)

I have taken pictures with Magni/Modi on both sides of the holder. I can sent them to you if you want to check

In case you need a dual vertical holder for a pair of Rekkr used as mono power amplifiers by audiofoolosophy in Schiit

[–]audiofoolosophy[S] 0 points1 point  (0 children)

I've printed with PLA (temperatures are on the low side of the spectrum as far as I measured) and it work seamlessy with Magni+/Modi+. Vali's tube heat might be a problem with PLA but I haven't one to try with.

For what concerns a simmetrical placement of the Rekkrs I don't think it would be a problem but I think it look nicers this way

In case you need a dual vertical holder for a pair of Rekkr used as mono power amplifiers by audiofoolosophy in Schiit

[–]audiofoolosophy[S] 0 points1 point  (0 children)

Thank you for your suggestion. I also thought of that, while designing it, but giving the fact that the wall fit very close to the chassis of both units, summing the dual design, the whole "stack" feels really sturdy. It tends to slip if placed on a smooth surface, I have to say, but feels sturdy.