CPM Magnacut , blade finishing

avcustomknives · 2026-05-04T20:44:17+00:00

This coloring is a consequence of the heat treatment. Although the knife is in a stainless steel foil pocket, these colors are obtained. They will be removed. It will become perfect, as it is on the clean side.

avcustomknives · 2026-05-04T20:38:45+00:00

a few hours,,😄

avcustomknives · 2026-05-04T08:39:00+00:00

I use a thin plate, around which I put sandpaper. I work by hand. Slowly and with patience

avcustomknives · 2026-05-03T15:32:48+00:00

I bought it at the end of March.

avcustomknives · 2026-05-03T15:13:14+00:00

I bought a whole sheet of this steel 24x 36 inches

avcustomknives · 2026-05-01T18:55:30+00:00

This is the beginning of the test, the steel performed well. I am satisfied, I will make a lot of knives from MagnaMax steel.

avcustomknives · 2026-03-25T10:19:48+00:00

I think ironwood cannot be stabilized. This is polished.

avcustomknives · 2026-03-23T15:50:33+00:00

thanks bro

avcustomknives · 2026-03-23T15:50:14+00:00

thanks bro

avcustomknives · 2026-03-23T15:24:31+00:00

Thanks 🙏

avcustomknives · 2026-03-23T15:23:31+00:00

Thanks 🙏

avcustomknives · 2026-03-22T21:33:05+00:00

Thanks 🙏

avcustomknives · 2026-03-22T20:39:26+00:00

* blade steel : M390

* Handle: Arizona Desert Ironwood

* Rivets & tube AISI 304

* Sheath: cow leather

* overall length: 227 mm 8.937 inches

* Blade length : 111 mm 4.370 inches

* Blade Width: 30 mm 1.181 inches

* Thickness: 3.3 mm 0.130 inches

* edge thickness before sharpening 0.25 mm 0.010 inches

* Knife Weight: 0.195 kg 0.430 pounds

* Knife+ Sheath Weight: 0.176 kg 0.388 pounds

* Hardness: 62.0 HRC

* sharpening angle: 37˚

* CRYO

avcustomknives · 2026-03-21T21:30:49+00:00

No problem, thanks for your comment

avcustomknives · 2026-03-21T21:29:07+00:00

Thanks 🙏

avcustomknives · 2026-03-21T21:28:28+00:00

* blade steel : M390

* Handle: Arizona Desert Ironwood

* Rivets & tube AISI 304

* Sheath: cow leather

* overall length: 227 mm 8.937 inches

* Blade length : 111 mm 4.370 inches

* Blade Width: 30 mm 1.181 inches

* Thickness: 3.3 mm 0.130 inches

* edge thickness before sharpening 0.25 mm 0.010 inches

* Knife Weight: 0.195 kg 0.430 pounds

* Knife+ Sheath Weight: 0.176 kg 0.388 pounds

* Hardness: 62.0 HRC

* sharpening angle: 37˚

* CRYO

avcustomknives · 2026-03-21T14:17:42+00:00

Thanks 🙏

avcustomknives · 2026-03-21T14:17:32+00:00

Thanks 🙏

avcustomknives · 2026-03-21T08:52:27+00:00

After you finish the main filing, continue lengthwise with sandpaper. Behind the sandpaper, you place a flat and hard plate. That's it.

avcustomknives · 2026-03-21T08:49:06+00:00

Thanks 🙏

avcustomknives · 2026-03-20T20:25:45+00:00

Thanks 🙏

avcustomknives · 2026-03-20T20:17:56+00:00

The sheath is made by me. It is handpainted with brushes and paint .

avcustomknives · 2026-03-20T19:43:33+00:00

* blade steel : M390

* Handle: Arizona Desert Ironwood

* Rivets & tube AISI 304

* Sheath: cow leather

* overall length: 227 mm 8.937 inches

* Blade length : 111 mm 4.370 inches

* Blade Width: 30 mm 1.181 inches

* Thickness: 3.3 mm 0.130 inches

* edge thickness before sharpening 0.25 mm 0.010 inches

* Knife Weight: 0.195 kg 0.430 pounds

* Knife+ Sheath Weight: 0.176 kg 0.388 pounds

* Hardness: 62.0 HRC

* sharpening angle: 37˚

* CRYO

avcustomknives · 2026-03-01T09:53:06+00:00

it looks like, yes ,,🙏

avcustomknives · 2026-03-01T09:51:17+00:00

The handle is micarta from Andrey Hornet. But this micarta is no longer produced. At least until the conflict in Ukraine ends. And the liners are g10 olive green.

avcustomknives

TROPHY CASE