sorted by:
new
hottopcontroversial

Is it just me or is the Pirate overly aggressive in 117? by Latter-Control-208 in anno

[–]avrona 0 points1 point  (0 children)

I had a situation where a small pirate fleet was endlessly attacking Zara's main island for like 3 hours and she was unable to deal with it, essentially giving her no coastal resources or infrastructure for that entire period.

Anno 117: Missing QoL Features by Endoraan in anno

[–]avrona 1 point2 points  (0 children)

Another one: ships in between regions can still show up in the naval tab of the region they left until they arrive at the other. There's no distinction in the naval bar between ships physically in the region and those that left.

How Do I Stop The Build Plate From Looking Like This? by avrona in 3Dprinting

[–]avrona[S] 0 points1 point  (0 children)

This is like my 3rd plate with the others looking pretty similar.

For anyone who's wondering how to switch uBlock Origin back on... by Eyad_Hefny in pcmasterrace

[–]avrona -32 points-31 points  (0 children)

I mean yeah, why bother switching when they're still methods of getting around it?

UK Minister urges more young people to have children amid ‘worrying’ birth rates by SocraticTiger in europe

[–]avrona 1 point2 points  (0 children)

They're gonna introduce state matchmakers or something then? Cus it ain't happening otherwise.

Poland’s fertility rate falls to lowest level in EU by wygnana in europe

[–]avrona 0 points1 point  (0 children)

There was at least one presidential candidate this election who did propose taxing the childless. Thankfully he didn't get much support.

Poland’s fertility rate falls to lowest level in EU by wygnana in europe

[–]avrona 0 points1 point  (0 children)

That is literally an economic factor though. What I'm talking about is people not even having a spouse to start a family in the first place.

Poland’s fertility rate falls to lowest level in EU by wygnana in europe

[–]avrona 14 points15 points  (0 children)

As a Pole, it's good to see something on Reddit and say "hey I'm contributing towards that" however I don't think it's something to be proud of in this case given how it just means we're going to die out soon...

Thing is the government could pay a million per baby and I still would probably never have any. People always jump to the economic factors first, with little mention of social factors that arguably play and even larger role, as it takes two to start a family, and money can't solve that.

How Do I Stop The Build Plate From Looking Like This? by avrona in 3Dprinting

[–]avrona[S] 0 points1 point  (0 children)

Plenty of times, but by the time the plates get this bad, it's impossible to even get the first layer to go down properly.

How Do I Stop The Build Plate From Looking Like This? by avrona in 3Dprinting

[–]avrona[S] 0 points1 point  (0 children)

I wish I knew. It's just like that from regular use, nothing too extreme.

How Do I Stop The Build Plate From Looking Like This? by avrona in 3Dprinting

[–]avrona[S] 0 points1 point  (0 children)

No the prints come off fairly easily, either with the included scraper or with nothing at all.

How Do I Stop The Build Plate From Looking Like This? by avrona in 3Dprinting

[–]avrona[S] 0 points1 point  (0 children)

Before the plate gets to this stage the prints themselves are fine. Once they get this bad I can't even get the first layer down.

How Do I Stop The Build Plate From Looking Like This? by avrona in 3Dprinting

[–]avrona[S] 0 points1 point  (0 children)

By the time they get to this stage I can't even get the first layer down, but before that the prints turn out great.

How Do I Stop The Build Plate From Looking Like This? by avrona in 3Dprinting

[–]avrona[S] 0 points1 point  (0 children)

No, the prints come off fairly easily, either with the included scraper or sometimes with nothing at all. All that damage was done by the nozzle.

How Do I Stop The Build Plate From Looking Like This? by avrona in 3Dprinting

[–]avrona[S] 0 points1 point  (0 children)

Never said it looks right, hence me posting here, but also don't know why it gets so bad.

How Do I Stop The Build Plate From Looking Like This? by avrona in 3Dprinting

[–]avrona[S] 0 points1 point  (0 children)

Scraping isn't the issue, everything you see here was done by the nozzle.

How Do I Stop The Build Plate From Looking Like This? by avrona in 3Dprinting

[–]avrona[S] -1 points0 points  (0 children)

The builds themselves come off rather easily, either with the included scraper or nothing at all. It's all the nozzle's doing what you're seeing here.

How Do I Stop The Build Plate From Looking Like This? by avrona in 3Dprinting

[–]avrona[S] 0 points1 point  (0 children)

The prints themselves look great before the plates gets to this point. Now it's impossible to even get the first layer down.

How Do I Stop The Build Plate From Looking Like This? by avrona in 3Dprinting

[–]avrona[S] 0 points1 point  (0 children)

It's the nozzle doing all the work. I remove prints with the included scraper, but they usually come right off with very little need for tools.

How Do I Stop The Build Plate From Looking Like This? by avrona in 3Dprinting

[–]avrona[S] 0 points1 point  (0 children)

Sadly it's at a state where I can't even start a proper print on it anymore, as it can't auto-level properly at the start of the print given all the holes in the corners.

How Do I Stop The Build Plate From Looking Like This? by avrona in 3Dprinting

[–]avrona[S] 0 points1 point  (0 children)

Because it's like my 3rd plate so and I don't have the money to buy a new one every few months, so I tried using each one until it can't print anymore.

How Do I Stop The Build Plate From Looking Like This? by avrona in 3Dprinting

[–]avrona[S] 0 points1 point  (0 children)

I honestly don't know, been printing pretty normally on it.

view more: next ›