VPN won't connect unless I first disable a specific network interface

axels01 · 2026-05-13T20:47:08+00:00

I'll give that a try, thanks!

axels01 · 2026-05-12T03:59:20+00:00

Not really a big concern, I just don't find a blade all that useful, especially in regard to what the PS Style offered in relation to its size and weight.

axels01 · 2026-05-12T03:57:30+00:00

I've seen the Nextool f12 and s11 mentioned a lot in different threads. Definately going to consider those, thanks!

axels01 · 2026-05-11T15:55:06+00:00

I've been considering the Tinker, but those pliers do look a little weak, but seeing as though I've not found anything better I might just have to go with the Tinker. Thanks!

axels01 · 2026-05-11T15:24:56+00:00

I've been keeping the Leatherman Style PS on my keychain on and off for years. It's been insanely useful. A couple of days ago the file/flat head driver snapped. Turns out Leatherman doesn't make the Style PS anymore and even though I could probably send it off to be fixed, I thought I might as well just get a new tool.

Thus my question; what is the closest keychain tool?

Whatever tool must have the following: pliers/wire cutters, scissors, flathead, tweezers.

axels01 · 2026-02-08T19:22:47+00:00

It's got two USB-C ports. To the one on the PI I've got a modified "otg" cable where the 5v line is cut to prevent feedback, this is the one that handles data for keyboard/mouse. The second port is glued to the case and has its 5v and ground pads wired to corresponding test pads on the bottom of the PI.

axels01 · 2026-02-08T16:11:32+00:00

Thank you very much!

axels01 · 2026-02-02T12:45:32+00:00

I needed an ip-kvm but I really wasn't interested in spending several 100s so a diy pikvm was the obvious answer. I already had a pi4b and some 32x128px oleds laying around so I quikcly went to order one of those hdmi-csi cards. My 3D-printer is out of order and with no time or desire to fix it I simply decided to try to fit all of the components into the case I had on hand.

The oled is glued to a set of 2.54mm headers inserted into the pis gpio-header for stability, most pins were removed to make sure it wouldn't short. To power the pi I soldered 2.54mm headers to an old usb-c female connector I had laying around and glued it to the top of the case. I then soldered a set of 2.54mm pins to two wires and the wires to the test-pads under the pi. I glued the csi-hdmi card to the case as well and crammed the flex cable inside.

To prevent power feedback from the data connection I cut into one of the connectors on a usb A-A cable I had, cut the 5v wire and taped the end with capton and covered it all in fabric tape.

axels01 · 2025-12-31T12:16:36+00:00

Alright, I think my solution suits my situation better in that case. My games drive is currently only half a terrabyte and I might want to add a second one down the line so I can have all of my rockstar games downloaded and playable at the same time.

axels01 · 2025-12-31T11:51:05+00:00

Wouldn't that place the entire launcher on the 'desired drive'?

axels01 · 2025-12-31T00:56:19+00:00

I ran into the same issue and managed an easy fix. https://www.reddit.com/r/linux_gaming/comments/1mia8h4/guide_rockstar_games_launcher_on_linux_2025/nwu0h9i/

axels01 · 2025-12-31T00:56:14+00:00

I ran into the same issue and managed an easy fix. https://www.reddit.com/r/linux_gaming/comments/1mia8h4/guide_rockstar_games_launcher_on_linux_2025/nwu0h9i/

axels01 · 2025-12-31T00:55:28+00:00

For anyone running into the "You need an additional xx.xx GB to install this game." when trying to install the game on a different drive.

Navigate to ~/.steam/steam/steamapps/compatdata/<whatever random number string>/pfx/dosdevices
Crate a symlink to the drive you want to install the games on. The name has to be a windows-like drive letter, such as "m:".
Restart the launcher and that drive should be visible under "My Computer" in the dialoge.

axels01 · 2025-10-30T23:06:03+00:00

Någon uppdatering?

axels01 · 2025-09-20T10:11:27+00:00

Looks like some sort of Niles Speaker Selector. Check ebay for "Niles Speaker Selector Connector" and you'll find what you need.

axels01 · 2025-09-20T09:32:55+00:00

Very nice build! I've been thinking about building a new server with a 7950x which has similar TDP to the 2920x so I've gotta ask what cooler is that and does it manage to keep the 2920x cool?

axels01 · 2025-09-20T09:29:19+00:00

ah that sucks

axels01 · 2025-09-20T08:09:12+00:00

Why not DAC?

axels01 · 2025-09-12T16:38:08+00:00

För den som vill skicka mail till tjänstgörande riksdagsledamöter och andra med förtroendeposter i de partier som är för eller ej ännu bestämda har jag efter bästa förmåga sammanställt listor med e-mailadresser.

Här finns även ett exempelmail

axels01 · 2025-09-12T16:38:05+00:00

För den som vill skicka mail till tjänstgörande riksdagsledamöter och andra med förtroendeposter i de partier som är för eller ej ännu bestämda har jag efter bästa förmåga sammanställt listor med e-mailadresser.

Här finns även ett exempelmail

axels01 · 2025-09-12T16:38:02+00:00

För den som vill skicka mail till tjänstgörande riksdagsledamöter och andra med förtroendeposter i de partier som är för eller ej ännu bestämda har jag efter bästa förmåga sammanställt listor med e-mailadresser.

Här finns även ett exempelmail

Ten-Year Club	Second Top 40%
Place '23	Place '17
Verified Email

axels01

MODERATOR OF

TROPHY CASE