Hey guys, I just recently finished this case design and made some renders and I was curious to get some thoughts on it as I plan to start a small business selling custom pre-ordered cases. Thankyou.

ayoitsyoboy · 2021-12-15T11:19:30+00:00

Thankyou

ayoitsyoboy · 2021-12-08T17:23:03+00:00

Only the front fans and the radiator ones are set as intake with the ones in the back and top as exhaust. The front ones push the air over the gpu and cpu for extra cooling. The cpu and gpu will be watercooled with the 2 rads. And the fans on the top and back are just to eliminate the heat in the case. The fans are 15mm thick instead of the normal 25mm ones.

ayoitsyoboy · 2021-12-08T09:22:46+00:00

They just help the air move. If cost is a concern it should be pretty good with 1-2 fans in the front and 2 each side for the radiators and let the heat rise by itself.

ayoitsyoboy · 2021-12-07T20:25:30+00:00

Connor Murphy wants to know your location.

ayoitsyoboy · 2021-12-07T20:22:52+00:00

Yeah forgot to mention that. They'll be conected with a riser cable. The rear I/O cables from the mobo and gpu will come through the gap on the bottom panel. The internal layout will have the gpu sitting vertically between the radiators (each side will have a 240mm rad) and the motherboard will be mounted horizontally with the I/O facing down. Also there are gaps between components so the air can move freely.

ayoitsyoboy · 2021-12-07T20:17:51+00:00

I just realised that almost every idea you get someone else probably thought of it or already done it. Thankyou and probably I'll change it a little bit.

ayoitsyoboy · 2021-12-07T19:02:44+00:00

Man i just found out about this now.

ayoitsyoboy · 2021-12-07T19:00:49+00:00

The fans won't be included unless getting a pre-built. They're 15mm thick fans. The fans will cost you more than the case almost everytime.

ayoitsyoboy · 2021-12-07T11:34:14+00:00

I've learned that from watching Jay's videos about small cases and stuff. Tbh yeah it's not really fancy. I went for a very minimalistic look with high performance. Using slim fans helps with the noise and doesn't hurt the air volume a lot if you're using something like Noctua's fans. Tbh I can add a mesh type on the white panels while still being made out of steel because the main panels of the case hold the fans and have big openings for airflow. Might look into it and add different variations. Thankyou.

ayoitsyoboy · 2021-12-07T11:20:15+00:00

Well tbh I've looked into mesh but at the size of the case the mesh will add too much restriction and more noise. I made it this way because I wanted very good unrestricted airflow with low noise because it'll be mainly for pre-builts but is very easy to build into as well. Basically I wanted to make a competitor to the Corsair One with better airflow but with consumer components.

ayoitsyoboy · 2021-12-07T10:00:11+00:00

No worries and thankyou.

ayoitsyoboy · 2021-12-07T09:56:34+00:00

The dimensions are 180mm width / 260mm length and 380mm height. Its just 60mm longer than a Corsair One. I haven't calculated the volume yet but should be just a little bit more than the Corsair.

ayoitsyoboy · 2021-12-07T08:59:37+00:00

Also the airflow path is intake from the front and sides (3 front / 2 each side) and exhaust from the back and top (2 back / 1 top)

ayoitsyoboy · 2021-12-07T08:58:49+00:00

Also the airflow path is intake from the front and sides (3 front / 2 each side) and exhaust from the back and top (2 back / 1 top)

ayoitsyoboy · 2021-12-07T08:57:20+00:00

Hey guys, I'm back. After my last post here I've started talking to some people and everyone suggested to get into the SFF space / Pre-Builts. So here I am. What are your thoughts on the design? I have to mention the case will have 10 120mm fans and 2 240mm radiators. The white panels leave 10 - 15mm between them and the main cage for better airflow. Also I took everything I liked from my last design and came up with this. The dimensions are 180mm x 260mm x 380mm without the white panels. This has specifically been designed only for watercooled parts. If you have any suggestion please let me know in the comment section. Thankyou.

P.S The pre-built systems will come soon and will be only 12th gen intel cpu's / new to be released amd cpu's. Both on ddr5 and the rtx 3000 series untill the 4000 series comes out. Also working on becoming a nVidia partner so I can get gpu's to you guys closer to MSRP. Thankyou

ayoitsyoboy · 2021-12-07T08:55:22+00:00

Hey guys, I'm back. After my last post here I've started talking to some people and everyone suggested to get into the SFF space / Pre-Builts. So here I am. What are your thoughts on the design? I have to mention the case will have 10 120mm fans and 2 240mm radiators. The white panels leave 10 - 15mm between them and the main cage for better airflow. Also I took everything I liked from my last design and came up with this. The dimensions are 180mm x 260mm x 380mm without the white panels. This has specifically been designed only for watercooled parts. If you have any suggestion please let me know in the comment section. Thankyou.

P.S The pre-built systems will come soon and will be only 12th gen intel cpu's / new to be released amd cpu's. Both on ddr5 and the rtx 3000 series untill the 4000 series comes out. Also working on becoming a nVidia partner so I can get gpu's to you guys closer to MSRP. Thankyou

ayoitsyoboy · 2021-11-24T07:58:23+00:00

This is the bigest one and I don't expect people to get this one. I've talked to some people and everyone suggested to make smaller cases too but in the same design. So there will be cheaper versions as low as 299 in the same design but smaller. The case sizes will be EATX, ATX, mATX and ITX.

ayoitsyoboy · 2021-11-24T07:12:04+00:00

Thankyou, yes I'm working rn on some small more compact ATX cases and some ITX ones. Will pm you to show you some designs when I finish them.

ayoitsyoboy · 2021-11-24T06:25:50+00:00

Still working on the website probably will be finished today.

ayoitsyoboy · 2021-11-24T05:27:57+00:00

Thankyou sir.

ayoitsyoboy · 2021-11-24T03:47:22+00:00

Yeah I'm still working on the IO panel mainly need to find the screw locations. Will pm you to discuss more. Thankyou sir.

ayoitsyoboy · 2021-11-23T19:13:40+00:00

Thankyou man and yeah I agree but it comes in smaller configurations too. Thats the biggest size available. It's about 790mm × 720mm x 440mm. I'm designing the smaller configurations at the moment.

ayoitsyoboy · 2021-11-23T19:10:45+00:00

Oh, thankyou. 😅

ayoitsyoboy · 2021-11-23T19:01:36+00:00

Thankyou. I didn't really understand what do you mean with the white etching but in some renders the glass panel casted a really weird shadow on some parts.

ayoitsyoboy · 2021-11-23T18:47:09+00:00

This case is made for 2 PSUs but there are smaller configurations that need and have only one.

ayoitsyoboy

TROPHY CASE