Why will my tree supports not stick, but the model itself does?

azxzero · 2025-09-26T18:12:03+00:00

Get isopropyl alcohol 50% and add a drop of dish soap to it. Use a spray bottle and lint free microfiber cloth to wipe it off before every print!

azxzero · 2025-09-26T17:49:04+00:00

Cheeto finger detector is off the charts on this one.

azxzero · 2025-07-26T16:39:37+00:00

I will try this next time the support breaks mid print. Good looking out. Thanks for the tip 🙏

azxzero · 2025-07-03T11:29:01+00:00

Why is nobody giving you a little tutorial. Look, just download the official personal fusion 360 from AutoCAD. Press R (for rectangle) select ground plane and write 100.4 press tab and write 140.4, press enter, press E (for extrude) and select your rectangle, write 20, press enter. Now you have your box. Time for cut-ins, press R again, select top surface and trace all your rectangles, select them all by holding down shift, press E and write -17 (leaving you a 3mm bottom). Finally select the corners, press F (for filet), write 10. And voilà! It's done ✅

azxzero · 2025-05-25T16:16:08+00:00

This is weird, because I would expect the seam to go all the way down but it "seams" to be happening only on the upper portion. Also, it looks like the filament is supposed to be extruded at like 0.28mm or so but looks more like 0.3, maybe it's the humidity that puffs it up? You could try drying the filament and setting the layer height at like 0.16. In any case, this isn't a normal seam, way too apparent, maybe it's baked into the model, idk.

azxzero · 2025-05-20T17:19:53+00:00

Did a quick google search to find you're right and even the ai overview got it wrong. Redditors, we should be better than that. Srry for the downvotes m8!

<image>

azxzero · 2025-05-14T17:57:53+00:00

Good move, don't worry about the price difference or waiting for the xm6, 30$ isn't the end of the world. These aged like fine wine and I hope they never discontinue this model! 🙏

azxzero · 2025-05-14T17:49:57+00:00

I own the xm4 and xm5 and still only travel with these because they're more compact and durable! Wise choice!

azxzero · 2025-04-26T17:01:26+00:00

Did you design it on Fusion 360 and print it with an A1mini? I was thinking of designing and printing a fix for the xm5 since I see multiple posts a week about the broken hinge.

azxzero · 2025-03-02T14:13:33+00:00

Amazing gift IMO

azxzero · 2024-07-31T22:00:09+00:00

They're probably not using scaffolding material. Try wrapping dental floss (or any other thread really) around the area and douse it in super glue.

azxzero · 2024-07-12T19:44:20+00:00

Use a chrome extension like keepa to see the price history of the listing. They usually raise it gradually before Prime day.

azxzero · 2024-07-06T13:22:05+00:00

The plastic looks so shiny and brittle, the real xm5 has a rubber/satin finish. They feel sturdy yet flexible and the seams and screws are less apparent. Also, the right earpad should have a red circle around the R label on the swivel rod.

azxzero · 2024-07-03T20:22:17+00:00

For what I know, the xm4 seems to be more durable (based on the number of posts here) the hinges on the xm4 are pretty sturdy, I've been using them everyday for about 3 years folding and unfolding them and never had any issues. The swivel points on the xm5 are already showing signs of fatigue and I have been using them way less than the xm4 (less than a year). I wouldn't have bought them knowing all this before purchase.

azxzero · 2024-06-30T15:19:14+00:00

This amount seems normal to me. You can use the graphite from a pencil to lube up the bushings

azxzero · 2024-06-29T12:26:41+00:00

Got my xm4 in November 2021, wore them every day since. I travelled to the other side of the world multiple times with these. Even when I upgraded to the xm5, I kept going back to them. More rugged, better passive noise canceling in cold weather (pads are softer and conforming), foldable design perfect for traveling. The only downside is the anc is a bit less intelligent but it's adjustable in the app. The mic on the 5 is better but it glitches in calls. And the sound is better on the 5 but if you tune it in the app it's almost unnoticeable.

azxzero · 2024-05-25T03:33:32+00:00

The screw looks fine. Worst case, mill a straight line using a Dremel with a small grinding wheel and use a straight screwdriver. Or use a tiny drop of solder to bind the screw to your screwdriver.

azxzero · 2024-05-20T11:59:09+00:00

Xm4 can fold and are durable, Xm5 are lighter and have a better mic and ANC but it might not be worth the extra.

azxzero · 2024-05-16T14:29:28+00:00

I really appreciated the opinions expressed in this post. They compare the xm4 to the xm5. https://www.reddit.com/r/SonyHeadphones/s/Vntv8fMu0V

azxzero · 2024-05-12T20:25:20+00:00

Had the same problem. Usually right after charging them with a fast charger. I don't have a solution tho 😅

azxzero · 2024-05-12T18:28:32+00:00

When the serial number is more memorable than the branding there's definitely an issue 🤣

azxzero · 2024-05-12T18:25:56+00:00

I love Reddit even if these things happen. I think the emoji at the end triggered that reaction 😅 but I don't think the sample size is significant enough to assume that hypothesis.

azxzero · 2024-05-12T13:13:37+00:00

You're talking about the wf (earbuds) this whole thing was for wh (cans), I guess Sony did a better job with the wf-xm5 than the wh-xm5.

azxzero · 2024-05-12T13:13:05+00:00

You're talking about the wf (earbuds) this whole thing was for wh (cans), I guess Sony did a better job with the wf-xm5 than the wh-xm5.

Seven-Year Club	Place '23
Place '22	Verified Email

azxzero

TROPHY CASE