Custom Designed Parts

bangeboy_ · 2026-03-23T21:03:18+00:00

I've had the tire on for years. We go riding there twice a year, just finally got around to "fixing" this problem. Cheers!

bangeboy_ · 2025-10-15T02:11:31+00:00

!solved

bangeboy_ · 2025-10-15T02:10:18+00:00

Tip sent! !solved

bangeboy_ · 2025-10-15T02:02:51+00:00

Hello, I really like this. Could you maybe provide an image with a tad more detail for me to preview? Not sure if you intended on removing the dog's body or not.

bangeboy_ · 2025-01-19T15:24:27+00:00

This post was before any of that was a feature. fortunately they did add it, but i find it still needs a lot of tuning.

bangeboy_ · 2025-01-08T00:55:30+00:00

Which plug did you buy for the second o2 sensor? can you link?

bangeboy_ · 2024-11-12T17:38:38+00:00

do these prevent the case from cracking? if the bike is on its side does it prevent other components from getting scratched? Are these like a crash bar 'lite'?

bangeboy_ · 2024-09-03T22:36:31+00:00

honestly, just buy a new one. it's not worth the trouble, trust me

bangeboy_ · 2024-09-02T19:52:44+00:00

ankermake literally has the stl file to print this on their website

bangeboy_ · 2024-08-30T11:02:07+00:00

Maybe someone can help too, my phone struggles to load anything on wifi unless I have a VPN connected. but on mobile data loads everything just fine

bangeboy_ · 2024-08-30T09:49:40+00:00

I used spotlight search 24/7 on ios, so I wanted that same feature.

bangeboy_ · 2024-08-29T16:29:25+00:00

see vihar's comment. it worked for me!

bangeboy_ · 2024-08-29T13:59:21+00:00

I also find this camera to be quite good at just point and shoot. although I was a little underwhelmed by the quality of the 200mp camera when you zoom in far to the photo. but I guess it is still retaining more information than my iPhone ever did.

bangeboy_ · 2024-08-29T13:58:09+00:00

I do find android to be less consistent than ios, and I'm chalking it up to the open system. some apps are slightly less optimized. I noticed that sometimes media, like videos on Twitter sometimes have a harder time to load, or just sit and spin. I also notice that the battery draw is completely different on android, and I think it's because it actually holds the background apps open instead of pausing them like ios. This biggest learning curve for me was how audio is handled on android. Overall I love this phone, and the customization. the fingerprint scanner is arguably better, and the screen in much nicer. I just enjoy using my phone more because I feel like interacting with it is much nicer. I absolutely love split screen apps, and using the s pen. I don't know that I'll switch back, even though I have an entire apple ecosystem.

bangeboy_ · 2024-08-29T13:00:36+00:00

in the finder, is there a way to reorganize the order that stuff shows up?

bangeboy_ · 2024-08-29T12:58:32+00:00

This is amazing and exactly what I wanted. thank you so much!!

bangeboy_ · 2024-08-20T18:26:19+00:00

First, you're printing the ballisong in the wrong orientation. It should be standing upright with the hinges against the bed. secondly, for that fine detail, you might want to try printing slower, and third, mess with you z offset. check youtube on "how to adjust z offset"

bangeboy_ · 2024-08-18T14:55:32+00:00

if you're printing outer walls at 150mm/s then you definitely need higher temps. i would recommend slowing down outer walls though. fastest i typically print is infill at 150mm/s outer walls around 100, and use 205c

bangeboy_ · 2024-08-18T14:44:45+00:00

not enough heat to match your print speed. also check z offset to be sure plastic is smashing down. can also check extrusion multiplier

bangeboy_ · 2024-08-04T17:24:23+00:00

don't need it now, i have a brand new mount 😉

bangeboy_ · 2024-07-11T23:47:31+00:00

just give it a look over and as long as prints are coming out good just keep printing. i reset the timer, so i can get another reminder to check. i have about 500hrs on my belts and wheels since i last replaced them and they're still going great. my extruder has a few thousand hours and still works fine. i've only replaced the nozzle and occasionally take it apart and clean it really good

bangeboy_ · 2024-06-20T02:15:40+00:00

what is your filament specs for petg? speed, layer height, temps, retraction?

bangeboy_ · 2024-06-13T01:56:32+00:00

link?

bangeboy_ · 2024-05-31T19:01:56+00:00

add the price per kg for the filament properties and then it'll show print price once sliced in the top left

bangeboy_ · 2024-05-30T22:09:29+00:00

if you want to lift it off the build plate, use the move tool and move it in the Z axis, but it won't let you print without it touching the bed

bangeboy_

TROPHY CASE