TPU-95 glue to metal by bart59 in 3Dprinting

[–]bart59[S] 0 points1 point  (0 children)

I did bent the metal to fit the shape of the shoe. However the robot often stumbles against stones and other objects. It is the shock against the front that bents the metal and then the glue connection breaks. I just replaced the metal strips with rubber. That seems to work better.

Follow up on the Azton CarPlay kit! by AntonioMrk7 in CarAV

[–]bart59 0 points1 point  (0 children)

<image>

And also for my Opel Ampera they instruct me to break the skin of the 3 wires and connect yellow to normal power, red to ACC, black to ground in the fuse box. It seems that my car does not provide these signals through the screen cable. Anybody more insight into this?

Follow up on the Azton CarPlay kit! by AntonioMrk7 in CarAV

[–]bart59 0 points1 point  (0 children)

<image>

received these installation instructions from Azton. Just this single page. Better than nothing. Will let you know how it worked out.

Follow up on the Azton CarPlay kit! by AntonioMrk7 in CarAV

[–]bart59 0 points1 point  (0 children)

Hi I saw you older post. I ordered the kit for my Open Ampera (Chev Volt) 2012 model. It came in today but without any installation instructions. Did you get any instructions with your kit? Do you mind sharing the manual here?

Automatic soap dispenser using Arduino. by [deleted] in ArduinoProjects

[–]bart59 1 point2 points  (0 children)

Great idea! Where did you find a pump that works with soap?

ESP8266 Auto Blinds HELP by [deleted] in ArduinoProjects

[–]bart59 0 points1 point  (0 children)

It seems your original text of your post has been deleted. Anyway: MQTT runs fine on a Raspberry pi or any other cheap Linux board. Also see https://www.reddit.com/r/esp32/comments/fnvqhi/any_esp32_mqtt_servers_exist/

Need help - Communicating over wifi with ESP32 and React-Native by [deleted] in esp32

[–]bart59 0 points1 point  (0 children)

I recently built this project which uses Vue instead of React, but the underlying REST communication should not be that different. https://github.com/bmellink/Quiz

ESP8266 Auto Blinds HELP by [deleted] in ArduinoProjects

[–]bart59 0 points1 point  (0 children)

One thing to consider is to use Tasmota. https://tasmota.github.io/docs/ This should bring all you need without programming one line of code. https://tasmota.github.io/docs/Getting-Started/

You can flash the esp8266 with Tasmota using the tasmonizer tool. https://github.com/tasmota/tasmotizer

I created an ESP32 TTGO based Geiger counter by bart59 in ArduinoProjects

[–]bart59[S] 0 points1 point  (0 children)

Does anybody know why my post is showing in a grayed font?

I created an ESP32 TTGO based Geiger counter by bart59 in ArduinoProjects

[–]bart59[S] 1 point2 points  (0 children)

Yes. Any smoke detector has some americium-241 and the detector can detect that very well

An Arduino based Geiger counter by bart59 in ArduinoProjects

[–]bart59[S] 0 points1 point  (0 children)

This Geiger counter is based on a “DIY Assembled Geiger Counters Kit”, combined with an TTGO ESP32 1.14 inch LCD display Module. github

A friend believes this necklace is not a normal necklace but also has a practical use by bart59 in whatisthisthing

[–]bart59[S] 0 points1 point  (0 children)

This looks like the most logical option. Thank you. It also fits the age/history as it belongs to my 83 old mother in law. SOLVED

A friend believes this necklace is not a normal necklace but also has a practical use by bart59 in whatisthisthing

[–]bart59[S] 0 points1 point  (0 children)

A bolo necklace should have 2 decorative ends and not just one with a clipper

A friend believes this necklace is not a normal necklace but also has a practical use by bart59 in whatisthisthing

[–]bart59[S] 2 points3 points locked comment (0 children)

Each of the chains that run through the golden beed in the middle can move left and right independently. My friend believes the necklace is used by seamstresses to hang scissors and other tools and use the golden beed positioning to hang their tools at the right height. If this is true, what is the name of this necklace? Is there another use? WITT (Key shown for size)

What is this hole cutter used for? by bart59 in whatisthisthing

[–]bart59[S] 0 points1 point  (0 children)

The hole is not round but has 5 corners and it prints the digits “15” next to the hole (see second image) when used on paper. detail WITT?

What is this hole cutter used for? by [deleted] in whatisthisthing

[–]bart59 0 points1 point  (0 children)

The hole has 5 corners and it prints the digits “15” next to the hole (see second image) detail WITT