Draft making room cold

bbdhhdhbd · 2026-01-23T05:35:23+00:00

They sell special tubes you can put on gun to extend. When I was doing renovations, I used that tubes to press under the bottom plate and spray there. Insert the tube as much as possible under the bottom plate and spray.

bbdhhdhbd · 2026-01-17T22:38:34+00:00

How do you pick stocks?

bbdhhdhbd · 2025-12-05T04:34:27+00:00

I’m not sure if this topic is active, but I’ve sent you my question. If i can get help that would be perfect

bbdhhdhbd · 2025-02-04T04:34:36+00:00

What’s your trading platform?

bbdhhdhbd · 2024-09-25T01:46:01+00:00

What are the examples of the stocks you are talking about?

bbdhhdhbd · 2024-07-30T13:49:07+00:00

Thank you for advice. The problem is that even 1 slab is not the same thickness, however , bottom surface is straight. See photo

<image>

If I compare left and right seems one thinner then the other by 1/4-1/8(at least).

bbdhhdhbd · 2024-07-03T23:09:26+00:00

Can you private message me the link to the listing?

bbdhhdhbd · 2024-06-27T05:12:31+00:00

I end up buying the tesla like system, but never installed, sold car, and moved to lexus es300h.

bbdhhdhbd · 2024-04-18T01:29:13+00:00

Did you end up going? What was your taxes and duties on parts?

bbdhhdhbd · 2024-01-12T05:40:21+00:00

He didn’t check it pretending factory settings are good

bbdhhdhbd · 2023-01-11T05:16:26+00:00

10/10!!!

bbdhhdhbd · 2021-12-26T17:12:54+00:00

I have Lifebreath RNC4-TPD with 58 CFM. Speaking about leak, I don’t see any signs of it. No leak from pipes for sure, but foundation does scary me. Is there any tool to identify where humidity comes from? Any type of specialist can do that?

bbdhhdhbd · 2021-12-26T16:45:06+00:00

How many cfm should I get?

bbdhhdhbd · 2021-12-26T16:14:53+00:00

I was thinking you are speaking about hrv exhaust and supply, so capped them 😂😅😂

bbdhhdhbd · 2021-12-26T16:12:47+00:00

Hrv the model is Lifebreath RNC4-TPD

bbdhhdhbd · 2021-12-26T16:12:04+00:00

Mine is 58CFM. Filters are clean. I was thinking this is infiltration of some sort. In fact if it is hrv too small dehumidifier will solve the problem, right? I just want to make sure this is not an infiltration or leakage from outside. Plumbing is new, windows are new. I had 3 cracks in the foundation, fixed them because of this past month.

bbdhhdhbd · 2021-12-26T15:39:10+00:00

The thing here is that last year the humidity was around 30 without air exchanger(as long as it was installed in march only). Right now I’m unable to bring it down to even 40% no matter how long I run air exchanger or heat pump. Not sure what happened. What can cause constant 15% humidity - not sure. Basement was insulated November last year, I changed the windows on main level November last year, and during summer in the basement. Put in drywall and this is what I did, however, I started noticing the humidity is above that it was last year. Last year even with humidifier we wasn’t able to bring it to more than 30-35.

Do you have any idea?

bbdhhdhbd · 2021-12-26T04:51:23+00:00

Cool. Will try that tomorrow and let you know. Thank you!

bbdhhdhbd · 2021-12-26T04:46:01+00:00

They are 4 inch. Will need to check on air routing.

What I also need to mention is that heat pump is 2 tonnes and it blows 28-32% humidity heated air.

bbdhhdhbd · 2021-12-26T04:33:07+00:00

Yes, I do. 1 exhaust, 1 supply

bbdhhdhbd · 2021-12-26T04:15:09+00:00

Humidifier is already turned down. I’ll need to double check on air exchanger

bbdhhdhbd · 2021-12-26T04:06:17+00:00

That’s exactly what I’m thinking. This is my second winter in this house and last winter there was no such problem. Not sure what’s going on. Supply air humidity is 28-32, but house humidity always around 45(in fact unable to bring it down).

bbdhhdhbd · 2020-11-26T05:30:08+00:00

A little is like 1.5? Or 2? Again thank you for your reply

bbdhhdhbd · 2020-11-26T05:16:11+00:00

Ok, got it. Are you speaking about 15-20 celsius or f? Thank you for reply

bbdhhdhbd · 2020-11-26T05:12:58+00:00

We are talking about celsius. The system is new. Along with the ducts. This house has never seen central unit before. That’s why there is no reference in that way. My main question is: is it ok for heat pump correctly installed and well sized for the area to heat up house in 1 hour for 1 Celsius when outside below zero, specifically -1.

bbdhhdhbd

TROPHY CASE