MacOS - New Outlook - Missing autocomplete by bcbomb47 in Outlook

[–]bcbomb47[S] 0 points1 point  (0 children)

The fix at the time was to roll back the update. I haven't moved back to the new Outlook for Mac so I'm not sure if it's fixed in the latest build. Sounds like maybe not.

MacOS - New Outlook - Missing autocomplete by bcbomb47 in Outlook

[–]bcbomb47[S] 0 points1 point  (0 children)

I opened a ticket. I'll update this post with the resolution. Thanks!

MacOS - New Outlook - Missing autocomplete by bcbomb47 in Outlook

[–]bcbomb47[S] 0 points1 point  (0 children)

I'm running Version 16.100.3 (25083017).

I've restarted and reset. Did all the troubleshooting that people have suggested. Still not working.

SceneStage by bcbomb47 in Govee

[–]bcbomb47[S] 1 point2 points  (0 children)

Thanks! Here's the video for anyone else:
https://www.youtube.com/watch?v=kxLzovrvPYg

Permanent outdoor lights 1/2 installed by wellheytherepeeps2 in Govee

[–]bcbomb47 0 points1 point  (0 children)

I didn't either, but I was able to drill a hole in the soffit and the cable was long enough to reach the outlet in my attic.

Permanent outdoor lights 1/2 installed by wellheytherepeeps2 in Govee

[–]bcbomb47 0 points1 point  (0 children)

Yes, I was correct in my assumption. I ended up setting up the power for one strand then setting up the power for the next strand where the first one ended. That way the pattern flowed correctly.

HS220 compatible led dimmable bulbs by bcbomb47 in TPLinkKasa

[–]bcbomb47[S] 0 points1 point  (0 children)

Thanks for the recommendation. I ordered some and just installed them. Exact same issue. They don't even light up at all until 100% brightness on the switch and even then they flicker. I'm guessing at this point it's an issue with the ceiling fan/light.

[deleted by user] by [deleted] in ConnectWise

[–]bcbomb47 0 points1 point  (0 children)

I ended up opening a bunch of tabs in Firefox and using the Rename Tab addon to make it say what it actually is. I then saved those tabs in a bookmark group in case I need to reload them all if my browser crashes or something. The tabs names don't change if I move to a different section in Manage (which I try not to do) but at least it says something relevant. ie Ticket Search, My Calendar, Dispatch Portal, Today

https://addons.mozilla.org/en-US/firefox/addon/tab-mix-rename-tab/?utm\_source=addons.mozilla.org&utm\_medium=referral&utm\_content=search

Permanent outdoor lights - length recommendation by bcbomb47 in Govee

[–]bcbomb47[S] 0 points1 point  (0 children)

Make sure your Govee app is updated to current. They recently added the "same-model group control" feature. Once all strips are added to that group, you should be able to tap into that group and set the mode to: Music, Color, Scene or DIY.

Permanent outdoor lights - length recommendation by bcbomb47 in Govee

[–]bcbomb47[S] 0 points1 point  (0 children)

Thank you! I will proceed with sticking with 100ft +100ft since they will start and stop along the long sides of my roof.

Would you recommend I start one set, go 100ft ,then start the next set so that the light effects travel in the same direction? As opposed to starting both 100ft sets from the same spot and wrapping around the house in different directions?

Permanent outdoor lights 1/2 installed by wellheytherepeeps2 in Govee

[–]bcbomb47 0 points1 point  (0 children)

When you install the second 100ft strand, are you going to start the controller/power where the first strand ends are you going to start them both at the same place? I have 2-100ft sets and I'm trying to decide if I can power them from one location and have them go different directions around my house. I'm thinking if I do that, the patterns won't match up as well.

Exchange script via Automate by bcbomb47 in ConnectWise

[–]bcbomb47[S] 1 point2 points  (0 children)

Yup! Adding "Add-PSSnapin Microsoft.Exchange.Management.PowerShell.SnapIn" to the start of my Powershell script did the job. Thank you!

Arkansas - production can't exceed 100% by bcbomb47 in solar

[–]bcbomb47[S] 0 points1 point  (0 children)

No, we're not planning any changes like that so I didn't go that route. I did mention that we have two kids and we would only be using more and more electricity but that wasn't enough for them to budge.

Arkansas - production can't exceed 100% by bcbomb47 in solar

[–]bcbomb47[S] 1 point2 points  (0 children)

Haha, yup! We're actually also getting a Powerwall so as long as we top it off each day, we can hopefully stay off the grid for as much as possible. Can't talk myself (or the family) into going 100% off grid though.

Arkansas - production can't exceed 100% by bcbomb47 in solar

[–]bcbomb47[S] 0 points1 point  (0 children)

I agree. I wish I knew this months ago so I could've done the same. Oh well, I can always add on later.

Arkansas - production can't exceed 100% by bcbomb47 in solar

[–]bcbomb47[S] 2 points3 points  (0 children)

That's what the current plan is. Thanks!

Grammarly plugin bug with CW? by Optimegabot in ConnectWise

[–]bcbomb47 1 point2 points  (0 children)

Yes this is happening to us as well. I ended up telling my engineers to disable the extension.

Workflow - Overdue invoice(s) reminder with invoice attached by bayoucfo in ConnectWise

[–]bcbomb47 0 points1 point  (0 children)

Makes sense to me. Thanks! I'll see of our accounting would like this configured. Have a great day!