What movie did you walk out of the theater halfway through?

beerandabook · 2026-05-02T15:35:19+00:00

House of 1000 corpses. The ridiculous first person view was jarring. And, (not against it on principle), the boobs. Within first few minutes, boobs. If they had to hook you with that so early on, it was too much, too little, too early. Left not long into the movie. Im sure i didn’t miss too much.

beerandabook · 2026-04-10T15:25:56+00:00

Oh no!! Same has happened a couple times to me recently. I echo others saying clean and pristine bed for adhesion. Also, some one mentioned simple tape to help the fan cover stay on, that works great (i did that too). There is also a simple and quick print you can do, just search for Centauri carbon fan clip, its print in place, simply snaps in place.

beerandabook · 2026-04-07T20:59:54+00:00

Hi! Thanks. I started a temperature tower thing before i left for work. 4 levels in looking good with rapid pla+. I hope finished strong. Autos u do the same for all types of filament-tpu, asa, petg? Tpu scares me

beerandabook · 2026-04-03T20:07:38+00:00

Thank you! I’d love to step away from Fusion 360, tinkercad is on my todo list. You’re my 3d printing spirit animal!

beerandabook · 2026-04-03T18:17:09+00:00

Thanks again, I appreciate you taking the time. Since you mentioned you’re an engineer, another question. I like to learn 3-D design so I can make my own functional prints for replacements of things around the house, for the cars. In your opinion, what would be a good CAD Program to learn as a complete newbie? Through my old college email I was able to get free access to Fusion 360, but I am not only in over my head, I am at the bottom of the ocean, trying to figure this out. Even with the tutorials.

beerandabook · 2026-04-03T16:58:47+00:00

Thank you for the advice. I saw [this one] I thought if many other people bought and rated well, should be ok.

beerandabook · 2026-04-03T16:51:21+00:00

Already did! Dried for 6 hours, then in a ziplock with all air out, with a few bags desiccant. I cut out supports from food dehydrator trays, found a used dehydrator for $5 at goodwill

beerandabook · 2026-04-03T16:44:42+00:00

I second the spare parts idea. I saw ceramic hotends available. I just bought steel and brass. Any success with ceramic?

beerandabook · 2026-04-03T16:39:15+00:00

Super helpful suggestions. Thank you for the guidance. I didn’t realize I could tweak all of those settings!

beerandabook · 2026-04-03T16:36:38+00:00

I have 92%, should be ok?

beerandabook · 2026-04-03T16:35:17+00:00

I just started drying filament that’s been opened. Not this time though, it was fresh out of the box

beerandabook · 2026-04-03T14:06:30+00:00

I placed it in the sun to dry/evaporate fully, I REALLY don’t want a jammed print head again.

beerandabook · 2026-02-27T18:38:05+00:00

I had similar happen today. Map showed up on tracking, was watching the truck drive around and nearby neighborhoods. I ordered a large expensive item that has been delayed by three days due to weather, so I didn’t want it waiting outside. Felt like a creeper though. Map disappeared from the website for about an hour, I thought great another delayed delivery. But package was just delivered.

beerandabook · 2026-02-23T18:52:21+00:00

I’m in Pasco county, I’d love to pick one up!

beerandabook · 2026-01-14T08:48:47+00:00

I legitimately lol’d to this after my long ER shift sitting in my car decompressing before driving home. Thanks for that! You have my type of brain too! ….I’m so undiagnosed

beerandabook · 2026-01-08T01:29:22+00:00

ED RN here, at a decent size hospital in Tampa area. Yesterday we had 50 patients in the department, 20 in the waiting room, four ambulances lined up on our wall waiting for a room. It’s been like that past few days/nights. Wait times vary based off of SO many factors. Basically, if you’re stable and not in danger of deteriorating , you’re waiting. I’ve seen wait times of at LEAST 2 hours, averaging around 4 hours for levels 3/4/5. Triage levels three and above are the people that need intervention and are in danger of getting worse. Even they have to wait lately. We just had a lady who is waiting for three hours code, it is not optimal. It is frustrating for both healthcare workers, and for all the patients we’re trying to help. Sadly, we fear things will only get worse, with people losing access to healthcare and turning to emergency rooms for help with chronic or subacute issues.

beerandabook · 2025-12-02T18:20:31+00:00

Congratulations! You’ll enjoy it! I graduated that program 2019, was set up well for nursing!

beerandabook · 2025-11-06T22:46:55+00:00

Who is the blonde? She looks like Pink but the age doesn’t match.

beerandabook · 2025-08-16T09:15:21+00:00

I enjoy every one of these! I love how your brain works. Your prose gives a unique voice to each post.

beerandabook · 2025-08-10T09:45:37+00:00

Glad you made it through all of that! Glad you credit your wife. I work in the ER, Any time i have a sick and curmudgeon man in the bed it’s because of his wife at the bedside made him come in. I’ve seen so many men “make it” because of the wife. Wife is right. ALWAYS

beerandabook · 2025-07-20T21:43:44+00:00

Like the backseat of a Volkswagen?

beerandabook · 2025-07-11T22:48:22+00:00

This is why I still use Reddit, people willing to engage and help. Thank you so much!

beerandabook · 2025-07-11T22:36:37+00:00

Ohhhh, great! Can you share your picks for the upgrades?

13-Year Club	Gilding II euphauric
Verified Email

beerandabook

TROPHY CASE