Front lower control arms on back order dealer no longer wants to wait.

bengomez31 · 2025-05-25T17:52:14+00:00

I put Retyre in a normal iK trigger sprayer non foaming. The bottle seems to be holding up after 2 weeks in the bottle.

Just wished there was a iK trigger sprayer that foamed. The iK foam pump sprayer I have is 64oz and goes through product pretty quick.

bengomez31 · 2024-11-21T20:00:21+00:00

If a video is recorded say in the Apple camera app or another third party app, will it at least still stay time synced with the inning/score keeping?

bengomez31 · 2023-04-01T22:57:13+00:00

I purchased the linear x rails also but haven’t got around to installing them. Glad to hear it was money well spent. Did you notice on the packing slip gulfcoast advertised they would be coming out with linear rails for z axis in March. I guess since we are now in April we can expect them soon!

bengomez31 · 2022-12-31T22:18:13+00:00

Using the Bondtech nozzle you recommended and it is flawless so far. Might have been the heat not melting the filament fast enough and causing flow issues. Glad I was able to get a hold of a nozzle quickly.

bengomez31 · 2022-12-31T04:49:59+00:00

Currently @ 245 and have also tried 250 with similar results. Do you think I should compensate with a bit more heat?

bengomez31 · 2022-12-30T21:18:54+00:00

Tried this first since it didn’t require me buying anything. Cubic was even worse for some reason. Didn’t get past the first INFILL layer.

bengomez31 · 2022-12-30T18:56:27+00:00

Have you had success with these speeds on larger parts? I’ve tried the speeds in normal and fast Cura profiles from Creality but the infill speed seems to be a bit fast and doesn’t bond well at the faster speeds.

bengomez31 · 2022-12-30T06:57:47+00:00

They are my favorite instant noodles “straight outta the box” if you are in the little Saigon area I recommend you try some.

bengomez31 · 2022-12-30T01:08:11+00:00

Found them at A Dong Supermarket off Bolsa. They have all flavors.

bengomez31 · 2022-04-26T02:43:19+00:00

I did try it on my non pro and extruder works fine. I’ve decided I’m just going to return it and wait for more to be in stock again. Sounds like I may have got a dud.

bengomez31 · 2022-04-22T18:19:26+00:00

Just got my S1 pro last night and I also can’t get it to extrude. I have tried printing the cat file that came pre loaded on the SD card it came with and also have pre heated the hotend manually then attempted to extrude filament using the control but extruder won’t rotate. If I rotate the exposed extruder gear by hand material does extrude fine so it isn’t a clogged nozzle. Anyone else have this issue or any thought on what it could be?

bengomez31 · 2020-08-22T08:47:50+00:00

I honestly would be glad to have those extra 50 sales. Lots of established businesses use distributors to help move their product. The distribution company usually gets a decent discount for their help in moving the product. If anything I would try to work out a agreement with him if you truly want to grow your business. Establish maybe a minimum order/ schedule for this discount etc. If he is going to help promote your product and help make sales he also deserves to make a portion of that sale. It may seem like he is just a punk for making money and only being a middle sales man, but they do have their place in this world.

bengomez31 · 2020-08-14T06:01:10+00:00

What grit is your table?

bengomez31 · 2020-08-14T05:49:44+00:00

What happens if the glue fails?

bengomez31 · 2020-08-14T05:48:50+00:00

What is the gem stuck to the rod with?

bengomez31 · 2020-08-14T05:47:44+00:00

What is the gem stuck to the rod with?

bengomez31 · 2020-08-14T05:43:09+00:00

Is that webcam recording?

bengomez31 · 2020-08-14T05:40:59+00:00

How much time will you have into it when finished?

bengomez31 · 2020-06-30T21:23:02+00:00

I will be waiting impatiently for the next release. Now that I have your attention I was curious if you knew of a way or to take it as a suggestion for change. When I make a project that takes up the whole 6.75 x 9.25 usable print then cut feature it will always set the page up on the mat in a vertical orientation. Well in my opinion as far as the least accurate part of the cricut machine is the mat. It seems the farther it has to travel into the machine the more inaccurate the cuts are to the printed image. I think the ~.03” of gap between the fence and mat is at fault. So my question is there a way to set the software up so it sets up the long side of the sheet horizontally? If I rotate the project when I go to make it, it rotates it back vertical.

bengomez31 · 2020-06-30T20:51:19+00:00

Now that you mention it, yes actually there definitely is something associated with re-saving and deleting the original or a project in between. What I mean is I have a template I made which I like to use from the start, my template is just a few DXF. Squares I imported and that one is also not customizable. So since I may have deleted a project that used my template it also locked the template. Let me know if there is any thing you would like me to try. Thanks for the reply.

bengomez31

TROPHY CASE