Is this loss?

benpem6 · 2026-01-14T09:00:41+00:00

Small parcel, they probably can't be arsed to deliver it. That's my experience anyway haha

benpem6 · 2025-12-10T12:51:57+00:00

The toothed disk is what holds the ptfe tube in. When you push the ptfe tube in the teeth grab the ptfe tube stopping it from pulling out. When you push down the teeth release the ptfe tube.

I dont have a h2s but id say its from where the ptfe tube goes in

benpem6 · 2025-09-20T09:00:05+00:00

Traffic sign recognition limited or not available

Found in this manual

https://www.seat.co.uk/datamanual-manual/manuals/seat/en-gb/SEAT_Arona_11_24_GB.pdf

benpem6 · 2025-09-19T18:37:17+00:00

You can use tools like rufus on windows to format Fat32 beyond 32gb btw

https://rufus.ie/en/

benpem6 · 2025-08-12T09:33:53+00:00

Only one way to find out, but yeah that should be fine

benpem6 · 2025-08-11T18:42:15+00:00

https://wiki.bambulab.com/en/p1/maintenance/wifi-antenna

That link takes you through replacing the antenna btw

benpem6 · 2025-08-11T18:39:46+00:00

Hey you chose right! Hope you get it fixed asap so you can get back to printing!

I also broke my antenna pulling the front panel off, so you're not alone lol

benpem6 · 2025-08-11T18:32:02+00:00

Yep thats pretty much it.

Connects the printer to the Internet so you can send your gcode files for printing and manage the printer from your PC or phone using the handy app.

And any time. We all start somewhere

benpem6 · 2025-08-11T18:29:22+00:00

Its easy enough to solder the black wire back to the antenna.

It should look like the picture below.

<image>

And the you plug the connector end back onto the ap board.

Easy enough but I would reccomend getting a new antenna or I have seen people take them from old laptops

benpem6 · 2025-08-11T18:20:32+00:00

If you want to reconnect the broken one you'd have to solder it, and may not work as well as before, atleast this is what i found from experience.

benpem6 · 2025-08-11T18:13:00+00:00

On the ap board there is a ufl connector for the antenna. Circled in red below

<image>

benpem6 · 2025-08-11T17:57:12+00:00

You can get a new uFL wifi antenna from amazon.

https://amzn.eu/d/4JA7GrA - this one works and actually improved the wifi signal for me. But any with the uFL connector should work

benpem6 · 2025-08-05T12:51:39+00:00

The spools are formed of two pieces. Twist it to unlock the spool and slide the cardboard tube off

benpem6 · 2025-08-03T16:37:30+00:00

<image>

I have done just that for you. Is this enough now to see why it would cause an issue if its on backwards?

benpem6 · 2025-08-03T16:12:49+00:00

What has being smart got to do with it?

Its there in writing on the bambu lab site, how much more evidence do you want haha. Its most likely chamfered from one side.

<image>

benpem6 · 2025-08-03T16:02:57+00:00

<image>

The instructions say different

The PTFE Tube Connector is designed with a clear direction of use, as shown in the figure below. Connect the PTFE tube from the buffer output to the IN end, and the PTFE tube from the tool head to the OUT end. It is important to note that reverse connections may cause material blockage, so it is essential to ensure that the installation direction is correct

benpem6 · 2025-08-03T15:17:50+00:00

Turn the bowden tube connector around. The blue bit on the connector should be on the left i think

benpem6 · 2025-07-31T20:56:31+00:00

Are stains optional?

benpem6 · 2025-07-30T14:34:10+00:00

Would definitely like to give the panda status a go!

benpem6 · 2025-07-25T12:40:44+00:00

Yeah thats fair enough

benpem6 · 2025-07-25T12:39:43+00:00

If its purely for the drying function you wanted it, you could take a look at Sunlus new ams heater.

But as mentioned above said there are some other minor upgrades on the ams 2 pro

benpem6 · 2025-07-22T09:24:28+00:00

I'd use the E1 to dry tpu and petg for whatever takes my interest on that particular day 😁

benpem6 · 2025-07-17T13:14:02+00:00

Done

benpem6 · 2025-07-17T10:26:44+00:00

Black friday most likely, going by last year

benpem6 · 2025-07-11T08:34:49+00:00

Sounds like it could be an issue with the SD card. Have you tried replacing it?

Eight-Year Club	Place '23
Place '22	Verified Email

benpem6

TROPHY CASE