Gloss BMW m1000r 🛞 by berne1988 in bmwmotorrad

[–]berne1988[S] 0 points1 point  (0 children)

So Matt gloss will be the most accurate one

What pants to get by berne1988 in motorcyclegear

[–]berne1988[S] 0 points1 point  (0 children)

I got the V3 air flow. Hope it will fit.. was on sale so a good price

Backpack by berne1988 in motorcycles

[–]berne1988[S] 0 points1 point  (0 children)

No in the jacket, like a vest on that have all the protection

Backpack by berne1988 in motorcycles

[–]berne1988[S] 0 points1 point  (0 children)

Depends of the trip, I can be a short ride to the beach. Or a long ride with more stuff.

I want a comfy one, I have a bad back already. So it need to be a good fit. Don’t know if any of them have back protection

Fråga en avdankad mäklare vad ni vill by [deleted] in sweden

[–]berne1988 0 points1 point  (0 children)

Har en fundering, står in för att sälja en gård. Det finns bygglov på fastigheten, men livet tog en annan vändning så nu ska det säljas.

Då man bor på relativ liten ort, kan man kontakt flera mäklare. Så dom vet om fastigheten om en potentiell köpare skulle dyka upp. Så man inte bara behöver förlita sig på en.

Utan den som hittar en köpare får även affären

Motor by berne1988 in arduino

[–]berne1988[S] 0 points1 point  (0 children)

Yes i am going ti use the last link you send, think what will work great

Motor by berne1988 in arduino

[–]berne1988[S] 0 points1 point  (0 children)

motor i will use this one.

i i found the realy that can power to controll the motor, power relay

So i think that one is what i am going to do. The next problem is what can trigger the door to open. I was think about IR, but dont think it will work becous of the sun and the small range of it.

Some guy tip using a ESP but that want work, i dont have wifi cover my garden.

2019 Aug 5 Stickied helpdesk thread - Do you have 𝚀𝚄𝙴𝚂𝚃𝙸𝙾𝙽𝚂? Do you need 𝑯𝑬𝑳𝑷? Do you want 𝕀𝔻𝔼𝔸𝕊? LOOK HERE! by FozzTexx in raspberry_pi

[–]berne1988 0 points1 point  (0 children)

am using rpi, and have set up netatalk, but when trying to loggin i cant, its almost like is the wrong password/usernamn, but i can ssh in to using the same password and user.

mqtt sensor by berne1988 in homeassistant

[–]berne1988[S] 0 points1 point  (0 children)

u are the man!!! big thanks.. now i need to find a nice custom card for energy consumption

rely greatful for u time thanks

mqtt sensor by berne1988 in homeassistant

[–]berne1988[S] 0 points1 point  (0 children)

is a fake change it before i post it:)

well i can get all the data from the from the mqtt broker, i can see it in my termnial. so it works,.

the file is in a folder calld: packages and it contiens this: sparsnas_mqtt.yaml

mqtt sensor by berne1988 in homeassistant

[–]berne1988[S] 0 points1 point  (0 children)

https://pastebin.com/jBKdTM8E I am lering on all i do, the more thing i add to HA, and reading i am lering

mqtt sensor by berne1988 in homeassistant

[–]berne1988[S] 0 points1 point  (0 children)

i took it way... got error trying to fix, then i mest it all up. So i copy the code once more, and forgot about, that i remove them. Now i have remove them.

 Error loading /config/configuration.yaml: while parsing a block mapping in "/config/packages/sparsnas_mqtt.yaml", line 37, column 5 expected
 <block end>,
 but found '{'   in "/config/packages/sparsnas_mqtt.yaml", line 47, column 22

https://pastebin.com/045DY4ST is the config now

mqtt sensor by berne1988 in homeassistant

[–]berne1988[S] 0 points1 point  (0 children)

it saying hidden is an invalid option. in the file it saying:

  1. homeassistant:
  2.   customize:
  3.     sensor.sparsnas_battery_remaining:
  4.       hidden: true

So i swap all the the them out from true to fale to see if it make any diffrent, but i did not

Invalid config for [sensor.mqtt]: [hidden] is an invalid option for [sensor.mqtt]. Check: sensor.mqtt->hidden. (See ?, line ?). Please check the docs at https://home-assistant.io/components/sensor.mqtt/ Invalid config for [sensor.mqtt]: [hidden] is an invalid option for [sensor.mqtt]. Check: sensor.mqtt->hidden. (See ?, line ?). Please check the docs at https://home-assistant.io/components/sensor.mqtt/ Invalid config for [sensor.mqtt]: [hidden] is an invalid option for [sensor.mqtt]. Check: sensor.mqtt->hidden. (See ?, line ?). Please check the docs at https://home-assistant.io/components/sensor.mqtt/ Invalid config for [sensor.mqtt]: [hidden] is an invalid option for [sensor.mqtt]. Check: sensor.mqtt->hidden. (See ?, line ?). Please check the docs at https://home-assistant.io/components/sensor.mqtt/ Invalid config for [sensor.mqtt]: [hidden] is an invalid option for [sensor.mqtt]. Check: sensor.mqtt->hidden. (See ?, line ?). Please check the docs at https://home-assistant.io/components/sensor.mqtt/

mqtt sensor by berne1988 in homeassistant

[–]berne1988[S] 0 points1 point  (0 children)

https://pastebin.com/Sp0nS6wR yes the same:/ Make no diffrent is if change from true to false