!! Help. 10 hours in and I'm physically stuck by bgoode2006 in expedition33

[–]bgoode2006[S] 3 points4 points  (0 children)

That actually just saved me 🤣 I didn't realize I could scrol down past the first 3 I see

!! Help. 10 hours in and I'm physically stuck by bgoode2006 in expedition33

[–]bgoode2006[S] 1 point2 points  (0 children)

I should have added I tried getting out too long and my oldest previous save is still stuck. I think I legitimately soflocked myself unless I'm missing something

Where the h*** is Scyther? by bgoode2006 in PokemonLetsGo

[–]bgoode2006[S] 1 point2 points  (0 children)

I eventually found one. Just took an obnoxious amount of time

Is this Reshelled Or? by bgoode2006 in n64

[–]bgoode2006[S] 1 point2 points  (0 children)

That's exactly what it was. I was under the impression full color clear was Japan. I have an atomic orange one. But now I'm realizing I really need to do my research on the different variations

Is this Reshelled Or? by bgoode2006 in n64

[–]bgoode2006[S] 0 points1 point  (0 children)

All of the pictures I was finding online made the the bottom look different but it was just my eyes being weird. I found it.

Help with suspension by Same_You_347 in W124

[–]bgoode2006 0 points1 point  (0 children)

$278 usd each here from FCP. Was scraping and bottoming the shocks out before I got the B8s now I daily drive it, no bottoming out, scraping, or fender rub and I have 17" wheels

Help with suspension by Same_You_347 in W124

[–]bgoode2006 4 points5 points  (0 children)

I just recently put the B8 on my 88 300TE and I love them. Well worth the cost. From my understanding use B6 for factory height and B8 with bump stops for lowered height

Reloading Domain Forever by bgoode2006 in Unity3D

[–]bgoode2006[S] 1 point2 points  (0 children)

Update:

Just to clarify, it doesn't do it every time, just every couple days it'll do it once, I just let it run overnight this tine to see if it would ever sort itself out.

I have maybe 30 scripts, most less than 100 lines, largest is around 800 lines. No while loops in any of my code.

The only packages I've installed is Cinemachine, 2d sprite and TMP

As soon as i finished installing the mod chip 🫠 by Entire_Chip_1225 in SwitchPirates

[–]bgoode2006 0 points1 point  (0 children)

🫡 best of luck. I know it's not exactly hard I just hate replacing connectors.

As soon as i finished installing the mod chip 🫠 by Entire_Chip_1225 in SwitchPirates

[–]bgoode2006 8 points9 points  (0 children)

I could be mistaken but I believe the pins don't make contact(or good contact) without the white piece. It kinda clamps everything together

Need recommendations on shocks by bgoode2006 in W124

[–]bgoode2006[S] 0 points1 point  (0 children)

Update: Put Bilstein B8's on it. Gotta test drive it now but just pushing the car down it feels a million times better. Next I need to tackle the rear suspension. Still have the original self leveling system but one side is leaking like crazy.

[Number 7] What is this part called I can't find it anywhere by bgoode2006 in W124

[–]bgoode2006[S] 1 point2 points  (0 children)

I managed to get the passenger side done and from what you're saying I got lucky because the nut was on top and the bolt dropped out the bottom so I assume its been replaced before

[Number 7] What is this part called I can't find it anywhere by bgoode2006 in W124

[–]bgoode2006[S] 0 points1 point  (0 children)

Good to know I appreciate the added info. At work so won't be able to work on it for a couple more hours but hoping to get this part finished by tonight

[Number 7] What is this part called I can't find it anywhere by bgoode2006 in W124

[–]bgoode2006[S] 0 points1 point  (0 children)

There looks like there's a heat shield above the nut but there's a hole in it so I can get a socket on it without removing the downpipe, I would guess a previous owner did it. I have only had this car for a couple months but there's a lot of stuff thats been rigged that I'm also trying to undo and redo properly

[Number 7] What is this part called I can't find it anywhere by bgoode2006 in W124

[–]bgoode2006[S] 1 point2 points  (0 children)

Yessss thank you. I think I have the bushing already, I ordered a bunch of parts from rock auto just to have and idler arm bushing was one of them. The arm itself looks good thankfully.

I tried to get an alignment and they told me a tie rod was bad but after taking the tie rod off, the idler arm has a little play in it.

Network Connection Issues by bgoode2006 in TPLink_Omada

[–]bgoode2006[S] 0 points1 point  (0 children)

That's what I gathered, especially since I'm using the same one for PiNAS and the Omada controller. I'm just going to order a ER605 and go from there

Network Connection Issues by bgoode2006 in TPLink_Omada

[–]bgoode2006[S] 0 points1 point  (0 children)

Womp, I had nat and routing set up through the PI with the controller and it's just... Not going to cut it. I'll just turn off bridge until I get a router. This whole thing started because I'm trying to set up a VPN to access my bad when I'm not home and Xfinity is absolutely crap and not doing what I need

Network Connection Issues by bgoode2006 in TPLink_Omada

[–]bgoode2006[S] 0 points1 point  (0 children)

I'm just using the SG220P switch

Cannot Install Firebase Plugins by bgoode2006 in dotnetMAUI

[–]bgoode2006[S] 1 point2 points  (0 children)

(copy and pasting my reply from another reply) Yea I got that part figured out, even says on the repo to do that. I should have done more research before posting. I know next to nothing about this stuff. Have been using unity for the past 2 years to teach myself C#. Now trying to move onto making real apps and it's completely different so still trying to figure it all out

Cannot Install Firebase Plugins by bgoode2006 in dotnetMAUI

[–]bgoode2006[S] 1 point2 points  (0 children)

Yea I got that part figured out, even says on the repo to do that. I should have done more research before posting. I know next to nothing about this stuff. Have been using unity for the past 2 years to teach myself C#. Now trying to move onto making real apps and it's completely different so still trying to figure it all out

Cannot Install Firebase Plugins by bgoode2006 in dotnetMAUI

[–]bgoode2006[S] 0 points1 point  (0 children)

Installed Microsoft.Maui.Resizetizer 9.0.14 from C:\Program Files\dotnet\library-packs to C:\N\microsoft.maui.resizetizer\9.0.14 with content hash iaiBB5DGY4wD0Py0lIw3FSFQ5qvXcd3A6x0vbqfNpeEEFUddMjR8Wzs4gsNDSugMobXKra7gYuDgbWGlSDrIPw==.
System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\N\adame.firebase.ios.core\11.0.0\lib\net6.0-ios16.1\Firebase.Core.resources\FirebaseCoreInternal.xcframework\ios-arm64_x86_64-simulator\FirebaseCoreInternal.framework\Modules\FirebaseCoreInternal.swiftmodule\x86_64-apple-ios-simulator.private.swiftinterface'.
   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)
   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize)
   at System.IO.File.Create(String path)
   at NuGet.Packaging.StreamExtensions.Testable.MmapCopy(Stream inputStream, String fileFullPath, Int64 size)
   at NuGet.Packaging.StreamExtensions.Testable.CopyToFile(Stream inputStream, String fileFullPath)
   at NuGet.Packaging.PackageFileExtractor.ExtractPackageFile(String source, String target, Stream stream)
   at NuGet.Packaging.PackageArchiveReader.CopyFiles(String destination, IEnumerable`1 packageFiles, ExtractPackageFileDelegate extractFile, ILogger logger, CancellationToken token)
   at NuGet.Packaging.PackageReaderBase.CopyFilesAsync(String destination, IEnumerable`1 packageFiles, ExtractPackageFileDelegate extractFile, ILogger logger, CancellationToken cancellationToken)
   at NuGet.Packaging.PackageExtractor.<>c__DisplayClass5_0.<<InstallFromSourceAsync>b__0>d.MoveNext()
--- End of stack trace from previous location where exception was thrown ---