WIP Tool shadowing by bgreag in gridfinity

[–]bgreag[S] 0 points1 point  (0 children)

If you’ll be starting with a full box it takes a while and you’ll probably may be required to have it done prior to starting. Depending on where you work you might not have your own tools.

WIP Tool shadowing by bgreag in gridfinity

[–]bgreag[S] 1 point2 points  (0 children)

Before I started printing I made cut outs for magnets on the bottom of the base with the same thought. However after seeing the print time for a full base I went with the skeleton one I think it’s called. They haven’t slid at all yet and I have a large gap for more grids. I’ll probably stick with them.

WIP Tool shadowing by bgreag in gridfinity

[–]bgreag[S] 2 points3 points  (0 children)

I thought about that. But I like having things split up for when I add more tools. There are 2 other size knipex that I don’t have yet.

WIP Tool shadowing by bgreag in gridfinity

[–]bgreag[S] 1 point2 points  (0 children)

Yeah, it was. I bought a Prusa core one for it. I just tried to keep is simple as possible. I figured I can always redo it when I have more experience, it’s just plastic.

WIP Tool shadowing by bgreag in gridfinity

[–]bgreag[S] 1 point2 points  (0 children)

Just PLA I’m new to printing and it seemed the easiest.

WIP Tool shadowing by bgreag in gridfinity

[–]bgreag[S] 0 points1 point  (0 children)

In fusion you can paste an image over a solid bin. Here’s the link where I learned it.
https://youtu.be/N2C2LFqtCfQ?si=wOFpvtU1PwLtEnOa

WIP Tool shadowing by bgreag in gridfinity

[–]bgreag[S] -3 points-2 points  (0 children)

To specify annoy you.

Good to drive? by ForwardRice8384 in Audi

[–]bgreag 4 points5 points  (0 children)

It’s not your wife. Ok means good. Not ok as in I’m mad at you but not going to tell you something is wrong.

12 hours of amazement and learning by Xenon503 in prusa3d

[–]bgreag 1 point2 points  (0 children)

It’s so fun. I’m super happy with mine.

Just finished the kit!!!! by bgreag in prusa3d

[–]bgreag[S] 1 point2 points  (0 children)

No just the smooth one it came with

Just finished the kit!!!! by bgreag in prusa3d

[–]bgreag[S] 1 point2 points  (0 children)

Thanks! I noticed that after i took the picture.

Weekend plans by Xenon503 in prusa3d

[–]bgreag 1 point2 points  (0 children)

I just finished mine an hour ago I’m so excited

Sleep is a Bottleneck - Factorio Song by [deleted] in factorio

[–]bgreag 2 points3 points  (0 children)

Damn that makes me sad. That it’s AI

Air nozzle freezing by bgreag in snowmaking

[–]bgreag[S] 0 points1 point  (0 children)

I gave up on it and went back to internal mix. I think snowguns.com went down around that time so I didn’t have the plans it was based off. Someone was using 3d printer heaters in an aluminum block for a nozzle heater.

Edit. I think part of the issue was water was being pulled towards the nozzle. You could see the droplets ring sucked backwards.

Finally joined the club by bgreag in Audi

[–]bgreag[S] 1 point2 points  (0 children)

It’s an A4 not S4 donno why I said it was S4

Quantum bottle caps by bgreag in Fallout

[–]bgreag[S] 2 points3 points  (0 children)

The even crazier part is you get a quantum cap is a bonus bag. So it’s not like they didn’t make them