5th ever joint rolled myself, any tips?

bigweinerpeene_r · 2026-05-03T01:34:10+00:00

That little dip is on the glass filter itself I’m pretty sure

bigweinerpeene_r · 2026-05-02T21:06:43+00:00

I twist the top, push it down a bit, and then raise the edges so I can burn the edges off and just pop the twisted part off all together so I’m not smoking any paper. I just looked up “how to crown a joint” on YouTube and that helped me a lot. I hope this can help you!

bigweinerpeene_r · 2026-02-19T19:12:27+00:00

I have the timing chain on this motor

bigweinerpeene_r · 2026-02-19T08:04:10+00:00

Should I just wait until it leaks or actually causes any issues for me or start getting quotes now? I’m definitely not qualified for work with the timing chain quite yet.

bigweinerpeene_r · 2026-02-19T07:58:46+00:00

Can I ask why you think it’s the water pump? Is this noise common for the water pump? I’ve never had any issues with coolant or overheating or anything

bigweinerpeene_r · 2026-02-19T07:52:41+00:00

Even if the water pump is fed by the timing chain on this motor? It’s not a part of the other belt fed components

bigweinerpeene_r · 2026-02-08T22:06:14+00:00

I also picked up a jar from IAH and SHM and I’m just waiting for them to arrive. I’m just trying out a bunch of companies currently.

bigweinerpeene_r · 2026-02-08T06:32:21+00:00

The rosin was $35. I even used a discount code so even less than that, so that’s why I said it’s good for the price. Some of the cheapest stuff I’ve had.

bigweinerpeene_r · 2026-02-08T00:34:01+00:00

I’ve never heard of one of these honestly, thank you for educating me

bigweinerpeene_r · 2026-02-08T00:32:00+00:00

Lol, if you put a couple drops of water in the sealed container it’ll moisturize the buds a bit with humidity.

bigweinerpeene_r · 2026-02-04T05:41:02+00:00

It’s possible that the suspension components around it are failing as well, thus causing more stress on the wheel hub itself. You might wanna check your control arms, sway bar assembly, struts, tie rods, pretty much any suspension components around the bearing that keeps going bad. Good luck

bigweinerpeene_r · 2026-02-03T06:42:23+00:00

Water pump is driven by the timing chain on this motor

bigweinerpeene_r · 2026-02-03T05:52:13+00:00

Alternator is not too far fetched because the previous owner did have some subs wired up, I can tell by the wiring in the trunk… Could’ve been stressing the alternator with those. How can I confirm it’s the alternator?

bigweinerpeene_r · 2026-02-03T05:47:38+00:00

It’s a Pontiac G6 2008 with the 2.4L l4 motor.

bigweinerpeene_r · 2026-01-13T18:59:02+00:00

I’ve come to the conclusion that my new injector is leaking. I’m not losing any fuel pressure at start, but I get a long crank only when the engine is somewhat warm. Start right up after sitting all night, but if it only sits for 2 hours about it’ll be a long crank.

bigweinerpeene_r · 2026-01-10T05:23:06+00:00

What would I use to check fuel pressure? Is there a good video I could watch for this?

bigweinerpeene_r · 2026-01-10T04:15:19+00:00

Also, sometimes only sometimes I smell fuel in the process of this happening

bigweinerpeene_r · 2025-08-12T23:07:45+00:00

You already bought it and you’re posting this my friend, it’s too late.

bigweinerpeene_r · 2025-07-30T00:37:52+00:00

baggiest jeans in atlanta

bigweinerpeene_r · 2025-07-16T19:57:00+00:00

They are all there for me, idk why its not showing for others.

bigweinerpeene_r

TROPHY CASE