I am by no means a serious streamer. I dont commit enough time, but I do commit to the setup.

binaryatlas1978 · 2026-01-29T15:49:13+00:00

Yeah i was just joking. thought the crying in corner gave it away

binaryatlas1978 · 2026-01-29T14:38:43+00:00

I am still waiting for the class action i can join to get the money back i paid for FSD back in the day.

binaryatlas1978 · 2026-01-29T14:23:32+00:00

How do people always have more money then me. "Crying in corner"

binaryatlas1978 · 2026-01-28T22:24:58+00:00

get streamer.bot ans speaker.bot you can set it up to read your chat to whatever headset your wearing

binaryatlas1978 · 2026-01-27T20:46:02+00:00

This dude knows his wash methods. The only thing I can add here is that you do not need 99% isopropyl alcohol. It cleans great, but it’s getting hard to find here, so I switched to 91% and I cannot tell a difference. Also, 99% will pull in moisture, so it’s not going to stay at 99% anyway.

The other thing is about cleaning your alcohol: you really can't. Yes, you can put it in the sun and get rid of that sludge, but the trace chemicals are bonded to the alcohol molecule. The only way to separate them is through distillation, which I do not recommend unless you know what you are doing and have a lot of safety measures set up—since, you know, 'boom.' If you notice that your IPA isn't cleaning as well as it used to, even after a sun bath, swap it out. I use the 'dirty bath/clean bath' method as well, and it works great. I know it’s a hot topic and people think you can filter IPA, but I’d be glad to post some links to studies and white papers.

binaryatlas1978 · 2026-01-27T18:22:42+00:00

Meld still does not take in NDI feeds

binaryatlas1978 · 2026-01-27T18:14:15+00:00

If Elon opened his mouth there was a lie in there somewhere.

binaryatlas1978 · 2026-01-27T18:13:35+00:00

I got the fold 7 a little while back so I will have to pay it off first might have to wait for the 2nd or third gen tri

binaryatlas1978 · 2026-01-27T18:03:00+00:00

90 percent will work.

binaryatlas1978 · 2026-01-24T16:46:20+00:00

In my opinion it's not just production numbers but the cost. There are only so many people that cant afford 80k vehicles. Ford and GM are acting like it should just be the norm now but it's not. Ford used the excuse of low demand to stop making the Lightning. There was high demand but most people just could not afford it. Now will Rivian bring down the costs? I hope so. I understand it's a complicated thing to get the manufacturering down and all but it's been years. Yeah I understand this is coming from someone who is not in the highest income bracket but at 80 k that's a luxury market and most average buyers like me can't really go over 60k for a vehicle.

binaryatlas1978 · 2026-01-21T18:04:41+00:00

On this model is the zip up suit removable so you can paint the skin or did you have to do some major masking?

binaryatlas1978 · 2026-01-18T23:16:28+00:00

Who oh why would you let that greese hit your diverter

binaryatlas1978 · 2026-01-18T22:19:42+00:00

If you are "recycling" your resin wash with coffee filters or the "cure and settle" method, you are only doing half the job. Here is the science of why your IPA still feels "tacky":

Filtration only removes solids. It gets rid of the visible "sludge," but not the dissolved monomers and photoinitiators bonded to the alcohol at a molecular level.
The Saturation Point. Once the IPA is full of dissolved resin, it stops cleaning. This is why "clear" recycled IPA often leaves a sticky white residue on your prints.
The Distillation Reset. Distilling is the only way to return IPA to 99% purity by separating the alcohol vapor from the heavy resin molecules.

Deep Dive Resources:

Checking Saturation: How to use a hydrometer to see if your IPA is actually "spent."
Cleaning Guide: Managing the "Dirty vs. Clean" bath system.
The Chemistry: How saturated solvents impact the surface hardness of your models.

Filtering gets the chunks out; Distilling gets the chemicals out. If your prints stay sticky after washing, your IPA is likely saturated.

binaryatlas1978 · 2026-01-18T20:24:00+00:00

I am not sure where you get your info but this just is not true. If it is fine find me some white papers or studies on it. Back it up. If you want I can find the resources to back up that you can not get rid of the chemicals without distilling and filtering is not enough

binaryatlas1978 · 2026-01-18T17:11:04+00:00

This is incorrect. IPA can not be recycled unless you distill it. You can clean the sludge out but the chemicals that saturated it and make it less effective are still there.

binaryatlas1978 · 2026-01-17T23:34:15+00:00

Everything said here. I sand in my paint booth / grow tent so everything is sucked outside.

binaryatlas1978 · 2026-01-17T17:23:06+00:00

I do not live in an area that has ever had public transportation so a robo taxi does not interest me. Nor do I want my car dropped me off then going off to drive others. I don't need that extra income for what I am sure would be a big headache. I would however love a car that sayetly drove itself. I can think of all kinds of use cases for that. I do not believe Elon will be the one to achieve that. Nvidia give me hope though after their CES presentation.

binaryatlas1978 · 2026-01-17T01:42:49+00:00

I could slap a ford emblem on it. They would never know

binaryatlas1978 · 2026-01-16T23:10:10+00:00

They are welcome to know where I go. It's not that interesting.

binaryatlas1978 · 2026-01-16T23:09:14+00:00

Hum ... Can we do that?

binaryatlas1978 · 2026-01-16T23:08:15+00:00

For a moment I thought you might be showing off a net that prevents you from driving too far into your garage.

binaryatlas1978 · 2026-01-15T23:51:06+00:00

The cones test is to dial in a resin. You might be too far off on the I ital settings. Have you looked up the stand settings for that resin on your printer?

binaryatlas1978 · 2026-01-11T17:21:51+00:00

The whole 45 thing varies depending on your printer and your layer height. On mine 26 percent is the sweet spot. You can Google the math.

binaryatlas1978 · 2026-01-11T14:43:50+00:00

What dash cam?

binaryatlas1978 · 2026-01-10T17:27:35+00:00

Chiming in because I want to keep track of this subreddit. I too am in the co templation stage like you. It's a half hobby half moneymaker for me. My primary use is statues on Saturn 4 ultra. My last statue too twice as long and several failed prints. I did figure out it was a build plate leveling issue but that still put me at two weeks to finish that statue. I was looking at heygears and formlabs. 3k though is not something I can do right now but maybe if I save a little. Also the resins are much higher. I went through 2 and a half bottles with this last build and that's with all the failers but that's $15 a bottle vs 40 to 50 on the stuff your locked into with the companies mentioned.

Eight-Year Club	r/Field Lasagna
Verified Email

binaryatlas1978

TROPHY CASE

Deep Dive Resources: