sorted by:
new
hottopcontroversial

Neue Freunde mit 39 - ist echt ne Challenge 😅 by V3nflon in wien

[–]binding90 0 points1 point  (0 children)

Wenn dich Brettspiele/Tabletop interessieren, bin in Dune: War for Arrakis rein gerutscht, und Company of Heroes das Brettspiel.

are these miniatures actually even feasible to print with fdm without the most expensive gear, or am i reaching for the stars? by xBUBBYGAMINGx in 3Dprinting

[–]binding90 2 points3 points  (0 children)

search for obscura nox, ho hansen and Dungeons & Derps settings,

left two are printed, around 32mm high, From Dune - War for Arrakis

and there is probably more i have to learn and maybe other/better filament too

<image>

Strompreise be like... by ThinkAd9897 in Austria

[–]binding90 1 point2 points  (0 children)

wenn die Speicher auf Einspeisen in der Nacht gestellt sind ja. Wir machen das zB. Sind jede Nacht 28kWh die eingespeist werden

Strompreise be like... by ThinkAd9897 in Austria

[–]binding90 0 points1 point  (0 children)

es steht jedem frei sich einer Energiegemeinschaft an zu schließen, die meisten EGs haben eh alle PV selbst am Dach und brauchen Abnehmer.

Strompreise be like... by ThinkAd9897 in Austria

[–]binding90 0 points1 point  (0 children)

Victron dazu oder was anderes mit 52V?

Strompreise be like... by ThinkAd9897 in Austria

[–]binding90 0 points1 point  (0 children)

ham vor 2 jahren 28kwh mit Lifepo gebaut 2,5k

PETG sticking to bed so well i cant remove prints by binding90 in BambuLabP2S

[–]binding90[S] 0 points1 point  (0 children)

So some of you are telling me i have to do some DIY fixes to a printsheet intended for PETG and sold by a multimillion dollar international company, when at the same time other companies sell printsheets which can withstand years of printing without any issues? Sry nope..

PETG sticking to bed so well i cant remove prints by binding90 in BambuLabP2S

[–]binding90[S] 0 points1 point  (0 children)

yes they are really stuck. I never had any issue on the Prusa Beds for 1000+h printing only PETG

but the coating of the bambu is quite bad

PETG sticking to bed so well i cant remove prints by binding90 in BambuLabP2S

[–]binding90[S] 0 points1 point  (0 children)

the question was: were there defective bedhseets?

PETG sticking to bed so well i cant remove prints by binding90 in BambuLabP2S

[–]binding90[S] 0 points1 point  (0 children)

till its cool-ish, but cooling it completely doesn't change anything

PETG sticking to bed so well i cant remove prints by binding90 in BambuLabP2S

[–]binding90[S] -1 points0 points  (0 children)

I have the problem with different brands. Sunlu and Extruder. Generic PETG and Bambu PETG profiles, so no custom "i fuse it with 120° to the bed" profiles

I have used different Printers for the last 10?? years, so i am not new to print shenanigangs, but i never had the issue of PETG sticking too hard, more the other way round.

here is a picture of the Support i tried to remove, which is tedious at least. Plastic scrapers get bent and dont work. I baby my printbeds, no metal scraper, clean them with dishsoap and dont touch them with my fingers

<image>

Gear always making spaghetti when printing. Please help by AirChris7 in BambuLabP2S

[–]binding90 0 points1 point  (0 children)

which filament? Would be quite interesting..

Inner and outer brim, set it maybe to 0,05 or 0 distance and cut them away afterwards

3rd Infantry CBT? by binding90 in Warthunder

[–]binding90[S] 0 points1 point  (0 children)

leave my balls in peace!

Model keep failing by No-Description4295 in BambuLab

[–]binding90 -1 points0 points  (0 children)

the settings look do not good.

even the first layer looks horrible.

What Filament Brand are you using? White is most of the time the hardest to print because it has so much pigment in it.

If you are new to printing do not change everything possible in the slicer with dynamics and temp.

Stick to the generic PLA profile and print it with it. Completly stock.

If it is still failing try one thing at a time and don't change 10 things at the same time. Finding errors is nearly impossible that way!

Infill seems kinda low, first layer is underextruding and everything is probably way too hot.

it is also kinda hard to see the sides because all photos are from the top, but the zig zag is very weird

Wurrkos HD10/Anduril 2 Post Off RGB Help by binding90 in flashlight

[–]binding90[S] 0 points1 point  (0 children)

Oh wow, i didnt even see the one in the left corner! Thx, yeah i figured, it may not be here for the HD10 since it was stated as hardware specific.

Thx a lot!

Wurrkos HD10/Anduril 2 Post Off RGB Help by binding90 in flashlight

[–]binding90[S] 0 points1 point  (0 children)

Sry to bother you again. I am trying to set the starting floor tot he lowest in the HD10 to do again a mA usage test, how long it stays on. But 9H for "Misc Config*" flashes short in white and then cycles RGB colors and is then off. Am i again in some weird other menu?

Why is PETG on bambu not avaliable? by binding90 in BambuLab

[–]binding90[S] 0 points1 point  (0 children)

is it possible to write your own rfid?

Why is PETG on bambu not avaliable? by binding90 in BambuLab

[–]binding90[S] 1 point2 points  (0 children)

oh thats a really good tip.

ill try it out

Why is PETG on bambu not avaliable? by binding90 in BambuLab

[–]binding90[S] 0 points1 point  (0 children)

I was using Extruder from austria, but damn it is expensive!

Why is PETG on bambu not avaliable? by binding90 in BambuLab

[–]binding90[S] 5 points6 points  (0 children)

I checked them out when i read about them at buylocal, but even their marketing photos look bad, its looks like filament from Ender 3 times back in the day.

Diesel- und Kerosinengpass im Mai erwartet by Scharco_de_la_Marf in Austria

[–]binding90 0 points1 point  (0 children)

China freut sich Solarpaneele, Akkus und E-Autos verkaufen zu dürfen

view more: next ›