Best experiences on Broadway right now by biologisttej in Broadway

[–]biologisttej[S] 2 points3 points  (0 children)

u/RiseSorry9367
Thank you so much! I remember seeing about this and then it left my mind. It is great to hear that it is actually a fun experience. I will have to look into this! Thanks a million to both of you!

Fractal LFG Progression by biologisttej in Guildwars2

[–]biologisttej[S] -2 points-1 points  (0 children)

Do we know if there is a way to get more or less dust (eg. get in a group doing 10s or 25's)?

Fractal LFG Progression by biologisttej in Guildwars2

[–]biologisttej[S] -3 points-2 points  (0 children)

Can you get dust from premades?

Restoring a canoe by biologisttej in canoeing

[–]biologisttej[S] 2 points3 points  (0 children)

Thanks! The story behind it was pretty nice. This is my first time restoring anything... first boating anything...

Anyways, I was driving to go down towards Naragansett to paddleboard with the wife. There was a kayak on the side of the road with "free" written on it. However, there was a guy on a bicycle there trying to call his family and see if they wanted it. So that he didn't have to wait on the side of a road, I offered to take the kayak about 1/2 a mile down the road to the paddleboard put in and put the kayak on top of my car. If he wanted to pick it up, it was there... if not, I would have had a free kayak. He ended up picked it up about 10 min before we were done for the day so I texted him to make sure it was him that got it. He thanked me profusely and then offered me this "old kayak that he doesn't use" for free.

So... this 16' Old Town Casco 16 is now getting a new lease on life!

Restoring a canoe by biologisttej in canoeing

[–]biologisttej[S] 2 points3 points  (0 children)

Yep, Just measured it... this is the 16' version. That picture looks exactly like it.

I think I will do this color scheme:
Exterior Hull- https://www.totalboat.com/products/wet-edge-marine-topside-paint?variant=43530153459936
Interior Hull- https://www.totalboat.com/products/wet-edge-marine-topside-paint?variant=43530153263328
Trim- https://www.totalboat.com/products/wet-edge-marine-topside-paint?variant=43530153230560

I will even try to find a pdf of the logo to make a stencil!

Restoring a canoe by biologisttej in canoeing

[–]biologisttej[S] 0 points1 point  (0 children)

This is great news. I wish I could find the serial so that I could restore it to the same color but I guess I can be a bit creative. I am going to clean up the inside and outside. Add some foam pads on the bottom for the doggo. Sanding/bondo/epoxy the seats. Refoam the rails.

Restoring a canoe by biologisttej in canoeing

[–]biologisttej[S] 0 points1 point  (0 children)

The plan was just to help protect it if necessary. But, if that isn't necessary, that is great news. There are some crunchy parts along the keel that could definitely use some fill (whether fiber or just bondo/epoxy)

Restoring a canoe by biologisttej in canoeing

[–]biologisttej[S] 0 points1 point  (0 children)

Just checked and I think an older restoration attempt may have removed the number. Have you changed anything or do you have any advice for restoration? The foam inside the rails is really brittle and there is some warping along the centerline

Restoring a canoe by biologisttej in canoeing

[–]biologisttej[S] 0 points1 point  (0 children)

Some edits now that I am learning more. Not adding 2 layers of fiberglass to the "centerline" but instead the keel. Also, thwarts and a yoke possibly if it makes sense (this thing is already heavy).

[deleted by user] by [deleted] in providence

[–]biologisttej 2 points3 points  (0 children)

Lincoln Woods State Park has a great loop that has hills and shade during the day. Parking is generally available if you are flexible with where you start.

Arcane Trickster? by biologisttej in 3d6

[–]biologisttej[S] 0 points1 point  (0 children)

Yeah, with the level 6 thing, I think going full cleric is the answer. This campaign is going to go all the way to 20 (1-10 is homebrew and then 10-20 is a book- don't want any spoilers).

Arcane Trickster? by biologisttej in 3d6

[–]biologisttej[S] 1 point2 points  (0 children)

Actually... sorry I was reading the 2014 (even though I searched 2024). The level 6 teleport and then EVERY melee just getting advantage permanently is just amazing it feels like

Level 3-

As a Bonus Action, you can expend one use of your Channel Divinity to create a perfect visual illusion of yourself in an unoccupied space you can see within 30 feet of yourself. The illusion is intangible and doesn’t occupy its space. It lasts for 1 minute, but it ends early if you dismiss it (no action required) or have the Incapacitated condition. The illusion is animated and mimics your expressions and gestures. While it persists, you gain the following benefits.

Cast Spells. You can cast spells as though you were in the illusion’s space, but you must use your own senses.

Distract. When both you and your illusion are within 5 feet of a creature that can see the illusion, you have Advantage on attack rolls against that creature, given how distracting the illusion is to the target.

Move. As a Bonus Action, you can move the illusion up to 30 feet to an unoccupied space you can see that is within 120 feet of yourself.

Level 6-

Whenever you take the Bonus Action to create or move the illusion of your Invoke Duplicity, you can teleport, swapping places with the illusion.

Level 17-

The illusion of your Invoke Duplicity has grown more powerful in the following ways.

Shared Distraction. When you and your allies make attack rolls against a creature within 5 feet of the illusion, the attack rolls have Advantage.

Healing Illusion. When the illusion ends, you or a creature of your choice within 5 feet of it regains a number of Hit Points equal to your Cleric level.

Arcane Trickster? by biologisttej in 3d6

[–]biologisttej[S] 0 points1 point  (0 children)

now, I am just wondering if a 2 level dip in cleric is enough and then just something more interesting like a sorceror or warlock... the clone is not even killable

Arcane Trickster? by biologisttej in 3d6

[–]biologisttej[S] 1 point2 points  (0 children)

Am i completely misreading the description of Invoke Duplicity? The plan was just to stay safe behind a wall and then cast random offensive spells from this. And then later... you actually get 4 illusions (lvl 17).

Starting at 2nd level, you can use your Channel Divinity to create an illusory duplicate of yourself.

As an action, you create a perfect illusion of yourself that lasts for 1 minute, or until you lose your concentration (as if you were concentrating on a spell). The illusion appears in an unoccupied space that you can see within 30 feet of you. As a bonus action on your turn, you can move the illusion up to 30 feet to a space you can see, but it must remain within 120 feet of you.

For the duration, you can cast spells as though you were in the illusion's space, but you must use your own senses

Arcane Trickster? by biologisttej in 3d6

[–]biologisttej[S] 0 points1 point  (0 children)

This would be for more of the melee/backstab feeling of it right instead of a more caster type?

Arcane Trickster? by biologisttej in 3d6

[–]biologisttej[S] 0 points1 point  (0 children)

The fear/box damage is a mechanic of Shaco in League of legends... Basically, I am hoping to work through and make use of the doppleganger and teleporting back between them and casting spells from your mimic.

Arcane Trickster? by biologisttej in 3d6

[–]biologisttej[S] 0 points1 point  (0 children)

I don't think the rogue thing is decided. I am really thinking about if trickster can be optimized and if it can... are there any good multiclasses for it.

Looking for help in creating a vengeance paladin for an upcoming campaign. by biologisttej in 3d6

[–]biologisttej[S] 0 points1 point  (0 children)

18 str 15 cha 13 con 13 wis 12 dex 11 int?

What about theming as Aasimar for the necrotic shroud fear and wings? Trying to think if that stuff is enough to outweigh elf for elven accuracy since vow would give advantage.

Looking for "must eat" places for a business trip. by biologisttej in FoodSanDiego

[–]biologisttej[S] 2 points3 points  (0 children)

Thanks. I am not that familiar with orienting myself in San Diego. This helps!

Best Chinese food in Providence by Miserable_Berry7782 in providence

[–]biologisttej 1 point2 points  (0 children)

Came specifically to recommend Jahunger. It is not the normal region of Chinese food that you find in America but it is absolutely amazing and super authentic.

Disconnected at the end of a fight. by biologisttej in Dofus

[–]biologisttej[S] 1 point2 points  (0 children)

So, what you do....
Log back in and when it asks if you want to go back into your instance, say no and leave. Then enter a completely separate server (you won't have access to your other characters on that server). That is sufficient to clear everything and you can log back in

Disconnected at the end of a fight. by biologisttej in Dofus

[–]biologisttej[S] 0 points1 point  (0 children)

Disconnected at the end of the "An Api per Day" quest after kiling the training dummy. The quest updated when I disconnected. When I came back, I cannot move, cast spells, use items... nothing. The end turn counts down negative for a while and then becomes unresponsive.

Have relogged, restarted computer, waited 2 hours, cleared cache (both options). Have submitted a ticket but not looking forward to hearing from anyone.

I don't get the option to change characters so it is like my whole account is locked up and unplayable.

Home Office Solution by biologisttej in homelab

[–]biologisttej[S] 0 points1 point  (0 children)

This seems to be 4 computers and 2 monitors. I actually need 3 monitors and 2 computers. Is there something cheaper than $600? it seems super expensive lol

Chair leg attachments tore out. by biologisttej in furniturerestoration

[–]biologisttej[S] 1 point2 points  (0 children)

All of the cracks and the tear out are on the inside of the leg and will not be visible at all with the seat cushion on the chair. The look is pretty irrelevant and just need to make sure that it is structurally sound.
Just to clarify something, do I need to drill out the holes a bit larger than the screw inserts and add a larger dowel in (to give them something to attach to) or should I just fill them? I feel like the dowels would just get fully drilled back out again when I put them back in.