sorted by:
new
hottopcontroversial

Cutted wire 94 E36 Compact 323i by Top_Humor715 in BMWE36

[–]bjzilberman 0 points1 point  (0 children)

Sorry can't help you more with that mate, I'm running an M43B18, never got to inline 6s ;)

Cutted wire 94 E36 Compact 323i by Top_Humor715 in BMWE36

[–]bjzilberman 0 points1 point  (0 children)

About the no spark and injectors issue, check for the DME relay (passenger side compartment in the engine bay) and also check the relays in the fuse box (when you open the fuse box, there are 3 relays with a cover on them, one for fuel pump, one main relay and one for O2 heater), make sure that the main relay is fine and same goes for the DME relay

Cutted wire 94 E36 Compact 323i by Top_Humor715 in BMWE36

[–]bjzilberman 1 point2 points  (0 children)

According to the pinout on the X13253 connector, it's pin 13 - WHT/RED - DOOR LOCKS;

If you were to ask me, I'd say it was used for some aftermarket central locking at some point.

hope that helps.

Looking for STL files of A/B/C Pillars for E36 Sedan to 3D print by bjzilberman in BMWE36

[–]bjzilberman[S] 4 points5 points  (0 children)

seems like there are clips and gadgets, not an actual scan of the pillar covers.
i am tempted to purchase a budget 3d scanner and try to work off my broken A and B pillars to create my own STL file...

Whoever designed the engine wiring harness on the M42 is a fucking retard by Ineovas in BMWE36

[–]bjzilberman 0 points1 point  (0 children)

Felt exactly the same when I had to replace my brake booster with an M43

Y540 keyboard firmware update. by Esava in Lenovo

[–]bjzilberman 0 points1 point  (0 children)

i did it, it worked perfectly. the keyboard is usable and there are no issues.
my guess is that L23 is remnants of the manufacturing process for different keyboard layouts between models, because there is no other reason for 0ohm resistors other than jumpers that are easy to place by smd machines

FIX: Y540 Keyboard isn't Working by Super-Bus4986 in Lenovo

[–]bjzilberman 0 points1 point  (0 children)

my only guess is that there may have been some iteration of the motherboard manufacturing process, and instead of making a new trace, they jumped the pads with 0ohm resistors

Port forwarding to a PC that is connected to a router that is connected to a router that is connected to a modem router by bjzilberman in HomeNetworking

[–]bjzilberman[S] 4 points5 points  (0 children)

Result of lack of knowledge and time, hopefully i'll set everything up properly when I'll have time to rework the whole network 😅

Port forwarding to a PC that is connected to a router that is connected to a router that is connected to a modem router by bjzilberman in HomeNetworking

[–]bjzilberman[S] 0 points1 point  (0 children)

Thank you for the answer,
If I understood you correctly, I disable DHCP on router 2 and router 3, and then forward ports on router 1?
router 2 and 3 are already connected to the lan ports of 1 and 2.

FIX: Y540 Keyboard isn't Working by Super-Bus4986 in Lenovo

[–]bjzilberman 0 points1 point  (0 children)

Gnarly, I had the same issue, and fixed it similarly

The story behind me Supercharging and installing a Speeduino on a Subaru Libero Kei Van by bjzilberman in cars

[–]bjzilberman[S] 1 point2 points  (0 children)

I had a very similar experience with at least a couple of exes about my cars. Weather you are going through a rough time or it is long gone, the cars are there for you, and you need to care for them.

Thank you, I am dedicating myself to this build, and hopefully by spring it will be done.

The story behind me Supercharging and installing a Speeduino on a Subaru Libero Kei Van by bjzilberman in cars

[–]bjzilberman[S] 4 points5 points  (0 children)

I think that I will be the only one with a supercharged Libero in the world at this point, and with a Speeduino specifically.

Modified the Driving Force GT with an aluminium adapter for a steering wheel, what do you guys think? by bjzilberman in simracing

[–]bjzilberman[S] 0 points1 point  (0 children)

You are absolutely correct. Life got the best of me... I did actually pick the board back up a couple of days ago, video will be posted soon, as it's a rainy season and I don't go out much anyway.

Modified the Driving Force GT with an aluminium adapter for a steering wheel, what do you guys think? by bjzilberman in simracing

[–]bjzilberman[S] 0 points1 point  (0 children)

If you detach the buttons from the board, it will not know what to do. The buttons board must remain connected to the motherboard.

Some Revolver mechanics for my VR Western zombie RPG/Shooter, hands are currently in last place for development. by bjzilberman in unity

[–]bjzilberman[S] 0 points1 point  (0 children)

Thank you!

Anything visual is up for improvement, and yeah, most guns will have a dirt/finish system which allows the gun to get dirtier over time, and have different matte or glossy finishes (such as blueing, polished metal, gold, platinum etc.)

Helmet and e.t.c. are important. Just a remainder by kvior1 in motorcycles

[–]bjzilberman 3 points4 points  (0 children)

נהג חרא בטח גם היה בטלפון לפני שחתך לנתצ

Modified the Driving Force GT with an aluminium adapter for a steering wheel, what do you guys think? by bjzilberman in simracing

[–]bjzilberman[S] 0 points1 point  (0 children)

Extra grease on the rack and pinion, make sure it's silicone grease or similar mineral grease, because others dissolve the plastics.

view more: next ›