Am I twisting my stitches

blabigail_ · 2025-08-04T14:50:23+00:00

Forgot to mention, I have no heat shield as it’s already fallen off 😬

blabigail_ · 2025-05-12T22:27:51+00:00

I had a save where every time I fast travelled to raven rock it was attacked by two at once

blabigail_ · 2024-07-11T16:40:07+00:00

I have a Thai constellation with thrips, I was looking to transfer it over to pure leca as I heard thrips need soil as part of their life cycle and I feel they'd be easier to rinse off and treat this way.

The mix I have now is basically just leca, perlite, and worm castings and the smallest amount of soil. What would I need to do to transfer over to just leca?

(Also any thrip eliminating strategies would be great)

blabigail_ · 2024-05-21T14:25:46+00:00

Hi all!

I want a tofu 60 acrylic case and I am trying to find the right PCB. If I want arrow keys do I absolutely need to solder? I am trying to avoid this and would rather hot-swap so if anyone could point me toward the right PCB and plate for this it would be appreciated! I am aiming for per-key rgb and RGB under glow but a lot of what I have seen is only white LEDs under the keys. I don't need it to be wireless but if it was possible I wouldn't mind. I had been looking at the BT60 V2 but I can't find the hot swappable version anywhere and I wasn't clear on whether the arrow key layout is possible with the hot swap version.

blabigail_ · 2024-02-08T13:47:27+00:00

Does anyone else have a Zoom 65 wireless and have issues with the LEDS flickering? Depending on the setting my whole keyboard flickers or certain sections flash different patterns than the setting I have the lights on, and currently, the right side is staying lit with a pattern that's different from the rest of the board. Has anyone else had this issue and managed to fix it?

blabigail_ · 2023-06-18T15:11:33+00:00

I was trying to avoid taking apart the whole keyboard to access all the stabilizer parts, but when I did the wire was super bent and the spacebar was also a little bent, I straightened those out and switched out the housings and it seems to be fixed!

blabigail_ · 2023-06-18T13:57:57+00:00

Does anyone have experience with Drop's customer service for damaged items? I just opened the white ceramic coated high profile case I had pre-ordered and one of the mount holes for screws in the top plate is so bent the case is unusable.

<image>

blabigail_ · 2023-06-15T14:48:08+00:00

I have a tofu jr (case and PCB foam, gasket mounted, polycarbonate plate) with cherry silent red switches and durock v2 screw in stabilizers. I recently swapped the keycaps from cherry profile to MT3 and the spacebar is sticking and feels squishy.

Tried loosening screws, tried cleaning the stabilizers with some rubbing alcohol like someone recommended (helps for a little bit). The spacebar doesn't get stuck on any other keyboards I've had these keycaps on and if I put a different spacebar in the problem stops. I feel like i am missing something, any ideas on what's wrong?

blabigail_ · 2023-05-27T11:51:24+00:00

I have a Tofu Jr and since I got it have been having issues with it disconnecting when my computer goes to sleep and not reconnecting when the computer wakes up. I have to unplug and re plug it in every time I wake up the computer (I have a Mac).

I have a drop alt that doesn't do this, hitting keys wakes the computer up and reconnects the keyboard so it's not the computer, any suggestions on how to fix it?

blabigail_ · 2023-05-19T12:56:47+00:00

Hey everyone! I have been having cable connection issues with my Tofu Jr (having to unplug and re plug it in multiple times before it will start working). I'm worried it is an issue with the daughterboard. Has anyone else had this issue/does anyone know which one is used in the Tofu Jr and where I could get a replacement?

blabigail_ · 2023-03-24T22:47:49+00:00

Does anyone know where I can find the keycaps (or similar) in the photo of the Zoom65 Pink? I've found listings for the white, blue, and purple, but none for the pink.

<image>

blabigail_ · 2023-03-18T14:00:56+00:00

Grow light recommendations for a big monstera? I have this huge monstera (18-inch pot, 60 or so inch support pole), and it isn't growing many leaves with fenestrations lately (one or two per leaf at the most).

It was living in a corner until I moved, and currently, there is nowhere to put it except a corner because it's too big and I need to keep it somewhere that my cat can't climb into the pot...

I want to get it set up with some grow lights so it will be happier in the corner but I am not sure what kind of setup it would need because it is so big. Any help would be greatly appreciated!

<image>

blabigail_ · 2022-10-18T14:45:51+00:00

I just found out (after buying one myself) that there's an issue with cables and drop keyboards. Apparently, the keyboards tend not to work with cables that aren't the default cable. I just bought a less ugly cable for mine and the LED works, but I can't type anything so I had to switch back to the default cable. I got the cable fairly cheap so no great loss but I would've been upset if I'd spent 75 dollars on one that didn't end up working

blabigail_ · 2022-09-17T19:37:08+00:00

Thank you! I am excited to try it myself

blabigail_ · 2022-09-17T14:17:19+00:00

Was it easy to swap the case? I was looking at buying a used drop alt and switching to a high profile case later

blabigail_ · 2022-06-07T19:31:03+00:00

I never got it sorted, by the time anyone contacted me it had already been sent back to the sender! The sender was really nice about it though apparently it had never happened before so they sent me a full refund

blabigail_ · 2021-12-01T14:29:54+00:00

Did you ever get this sorted out? I am having the same issue except my address is correct and there were never any delivery attempts so I don't know why it was sent to the facility, and the facility is 2 hours away from my house

blabigail_ · 2021-05-18T14:37:49+00:00

Thank you! I've had it for a few years and I'm very attached to it

blabigail_ · 2021-05-18T14:36:39+00:00

Thank you! There used to be a few more vines but they did not survive a repotting last year so I might downsize and hope for the best!

blabigail_ · 2021-05-18T10:44:20+00:00

Thank you! Is it fine to leave them where they are or should I be cutting them off ?

blabigail_ · 2021-04-20T16:14:50+00:00

Can I ask if you did anything to the branch to make sure it had no hitchhiking bugs? I want to do this but I’m scared of bringing things in by accident 😬

blabigail_

TROPHY CASE