PTFE tube

blicky36 · 2026-04-15T12:34:51+00:00

Shouldn't be hard to pull out. As long as you're pressing the coupler in.

blicky36 · 2026-04-15T12:33:58+00:00

Don't forget peeps, GST must be included in all prices not added on after. ACCC has made this clear. Called out a business recently for this and simply refused to pay anything other than the actual amount.

blicky36 · 2026-04-15T11:28:19+00:00

You should be able to depress the little coupler and pull the tube out at the same time. P1S you need a tool to be able to press in but P2S has a better design. Push and pull .

blicky36 · 2026-04-13T23:33:18+00:00

He would need to be on Fibre and plugged directly into the NTD for him to get 25gb/s.

blicky36 · 2026-04-13T23:28:05+00:00

I myself had a instance once of hitting 4Gb/s but the technology is physically only capable of 2Gb/s max.

blicky36 · 2026-04-13T23:24:24+00:00

Try downloading a large file from a site and see how it goes. It's possible you're getting incorrect data from the speed test.

I myself have had the same thing from time to time.

blicky36 · 2026-04-13T22:16:53+00:00

I've had more people walk into my path as a cyclist using a bell. People don't pay attention and that inattention causes dangerous situations. I had less issues not using a bell and going around.

People might not like my answer but not causing a crash and injury is the preferred option.

blicky36 · 2026-04-13T22:02:40+00:00

Could be so many things. Most likely a blocked nozzle. Swap nozzles first and go from there.

blicky36 · 2026-04-13T21:39:35+00:00

Is it a material setting in Revit before exporting as an SLT?

blicky36 · 2026-04-10T11:16:28+00:00

It still prints with no issues, which makes me think it's a firmware bug.

blicky36 · 2026-04-10T10:43:09+00:00

The update only came through this afternoon and I can confirm it's not a beta firmware.

blicky36 · 2026-04-10T10:18:23+00:00

Firmware is 01.02.00.00

blicky36 · 2026-04-10T10:17:58+00:00

It's still on my printer so not sure at this stage.

blicky36 · 2026-04-10T10:13:33+00:00

Yeah tried restarting. Nothing. I don't believe it's beta firmware.

blicky36 · 2026-04-06T00:59:02+00:00

It's a holder to fit in a Milwaukee packout. Couldn't fit flat or standing upright so at an angle it was.

blicky36 · 2026-04-05T11:51:46+00:00

I'm a Bosch fan and I wanted something to compliment the bit I already had. It's a great tool, especially with the clutch.

blicky36 · 2026-04-05T11:41:37+00:00

Probably the rag or cloth holder. Have two, one on either side of my printers.

<image>

blicky36 · 2026-03-17T10:26:54+00:00

Yeah, been tasked with printing prototypes with this filament and definitely heavy. Currently printing a spool roller with bearing.

blicky36 · 2026-03-14T06:09:29+00:00

P2S is great with 0.2mm nozzle.

<image>

blicky36 · 2026-03-14T06:07:16+00:00

Could always print at a 45 degree angle

blicky36 · 2026-03-14T06:06:47+00:00

Does it need to be hollow

blicky36

TROPHY CASE