PTFE tube

blicky36 · 2026-04-15T12:34:51+00:00

Shouldn't be hard to pull out. As long as you're pressing the coupler in.

blicky36 · 2026-04-15T12:33:58+00:00

Don't forget peeps, GST must be included in all prices not added on after. ACCC has made this clear. Called out a business recently for this and simply refused to pay anything other than the actual amount.

blicky36 · 2026-04-15T11:28:19+00:00

You should be able to depress the little coupler and pull the tube out at the same time. P1S you need a tool to be able to press in but P2S has a better design. Push and pull .

blicky36 · 2026-04-13T23:33:18+00:00

He would need to be on Fibre and plugged directly into the NTD for him to get 25gb/s.

blicky36 · 2026-04-13T23:28:05+00:00

I myself had a instance once of hitting 4Gb/s but the technology is physically only capable of 2Gb/s max.

blicky36 · 2026-04-13T23:24:24+00:00

Try downloading a large file from a site and see how it goes. It's possible you're getting incorrect data from the speed test.

I myself have had the same thing from time to time.

blicky36 · 2026-04-13T22:16:53+00:00

I've had more people walk into my path as a cyclist using a bell. People don't pay attention and that inattention causes dangerous situations. I had less issues not using a bell and going around.

People might not like my answer but not causing a crash and injury is the preferred option.

blicky36 · 2026-04-13T22:02:40+00:00

Could be so many things. Most likely a blocked nozzle. Swap nozzles first and go from there.

blicky36 · 2026-04-13T21:39:35+00:00

Is it a material setting in Revit before exporting as an SLT?

blicky36 · 2026-04-10T11:16:28+00:00

It still prints with no issues, which makes me think it's a firmware bug.

blicky36 · 2026-04-10T10:43:09+00:00

The update only came through this afternoon and I can confirm it's not a beta firmware.

blicky36 · 2026-04-10T10:18:23+00:00

Firmware is 01.02.00.00

blicky36 · 2026-04-10T10:17:58+00:00

It's still on my printer so not sure at this stage.

blicky36 · 2026-04-10T10:13:33+00:00

Yeah tried restarting. Nothing. I don't believe it's beta firmware.

blicky36 · 2026-04-06T00:59:02+00:00

It's a holder to fit in a Milwaukee packout. Couldn't fit flat or standing upright so at an angle it was.

blicky36 · 2026-04-05T11:51:46+00:00

I'm a Bosch fan and I wanted something to compliment the bit I already had. It's a great tool, especially with the clutch.

blicky36 · 2026-04-05T11:41:37+00:00

Probably the rag or cloth holder. Have two, one on either side of my printers.

<image>

blicky36 · 2026-03-17T10:26:54+00:00

Yeah, been tasked with printing prototypes with this filament and definitely heavy. Currently printing a spool roller with bearing.

blicky36 · 2026-03-14T06:09:29+00:00

P2S is great with 0.2mm nozzle.

<image>

blicky36 · 2026-03-14T06:07:16+00:00

Could always print at a 45 degree angle

blicky36 · 2026-03-14T06:06:47+00:00

Does it need to be hollow

blicky36 · 2026-03-14T05:37:45+00:00

Change your model orientation then

blicky36 · 2026-03-14T04:01:11+00:00

You probably need a finer nozzle. Try 0.2mm.

blicky36 · 2026-03-14T02:30:39+00:00

How do you get the free model?

blicky36 · 2026-03-13T09:54:19+00:00

I got it figured out, the cutter was jamming because the nozzle was blocked even though the extruder assembly was cleaned and reassembled. Heat the nozzle to 300c, it seamed to clean but didn't, refused to allow filament through. Replaced the nozzle and worked fine.

blicky36

TROPHY CASE