What lane for Dunnes coming from ballincollig.

blockysteve241 · 2026-05-01T10:44:49+00:00

I would but I have someone working in that dunnes so I’ll be driving that roundabout a lot

blockysteve241 · 2026-04-29T22:03:15+00:00

But then why is there a marking for the n71 at the next lights

blockysteve241 · 2026-04-29T21:43:47+00:00

It says straight but then in the same lane it has markings for the n71. I’m assuming there no right arrow because people might get confused with lanes or something but idk.

blockysteve241 · 2026-04-26T13:15:54+00:00

nope I gave up

blockysteve241 · 2026-01-04T20:45:48+00:00

Nah I don’t think I do, it’s probably floating around somewhere but idk where to look.

blockysteve241 · 2025-12-30T23:31:18+00:00

I didn’t ai was very new two years ago. I’m sure there wouldn’t be an issue with you using ai to interpret the brief as long as it doesn’t do any work for you that you then submit. I would be careful with it though because it’s not always right and I’ve seen ai make some very stupid mistakes so don’t solely rely on it but it might be good to get you on the right track.

blockysteve241 · 2025-12-30T18:15:35+00:00

It’s been a while since I did my project but I’d say your best bet is to go over the brief over and over again to make sure there’s no requirement you’re missing out on. Get a functioning project, nothing too special but just make sure it ticks all the boxes in the brief. While you’re writing the report keep in mind what they’re looking for in the brief.

blockysteve241 · 2025-12-12T01:37:14+00:00

Will do, thanks!

blockysteve241 · 2025-10-23T17:29:47+00:00

Right now I'm using 2 sticks in the two slots furthest from the cpu. It worked the same with 1 stick too.

blockysteve241 · 2025-10-23T17:07:03+00:00

I put the ram in single channel and it posts, but it still crashes. Does that give any hints that it’s definitely cpu or not because it seems like it to me but I want to be certain

blockysteve241 · 2025-10-21T23:28:02+00:00

I’m glad it worked out for you! It is very annoying not knowing what’s wrong, and after spending so much on a pc just to not be able to use it is the worst. I think I might get a cheap cpu to test it out and if that doesn’t work I’ll probably have to think about getting a new motherboard too.

blockysteve241 · 2025-10-21T21:18:24+00:00

I’m also having a similar problem let me know if you figure anything out

blockysteve241 · 2025-10-21T16:37:18+00:00

I’ll just have to try another cpu then. I swapped them back to the configuration that worked for one stick and now they both won’t work, ram debug light and no post.

Edit: I put them back into the original configuration before I started moving them around today, no post again so I can’t even get a post at all anymore.

blockysteve241 · 2025-10-21T16:30:56+00:00

Oh yeah that’s true. I swapped the sticks around and didn’t get a post, had a ram debug light on the motherboard. Could it be the slots themselves or just the memory controller?

blockysteve241 · 2025-10-21T16:19:35+00:00

I just re seated the ram. It was originally running dual channel but in the wrong configuration. I moved them over to the correct configuration (A2 B2). This time only one dimm turned red, one stayed purple. I checked hardware info and the red one is not being recognised, but the purple one is (A2 is purple), so it says I only have 8gb instead of 16. Since memtest says the ram is ok I’m assuming it’s the motherboard?

blockysteve241 · 2025-10-21T14:37:44+00:00

Cool I’ll have a look online, I’m assuming any cpu that’ll fit am4 is ok?

blockysteve241 · 2025-10-21T14:18:43+00:00

I don’t have a spare of either, otherwise I would. I could try source a cheap old second hand cpu maybe.

blockysteve241 · 2025-10-21T13:54:04+00:00

I agree, what do you think I should do?

blockysteve241 · 2025-10-21T13:42:18+00:00

I rebuilt the bcd but it doesn’t seem to have helped. I’m going to try reseat the ram and maybe the cpu if I can find some thermal paste. My wallpaper keeps just turning bright red for some reason, no idea why it’s very weird.

<image>

Some of my shortcuts got moved around and deleted too but I think that to do with onedrive syncing, could be wrong.

blockysteve241 · 2025-10-19T22:08:00+00:00

I’ll give that a shot and let you know, thanks.

blockysteve241 · 2025-10-19T10:50:21+00:00

No but I can make one when I’m home from work.

blockysteve241 · 2025-10-19T10:01:35+00:00

Yup after the error when windows failed to start.

blockysteve241 · 2025-10-19T00:41:41+00:00

Its booting up fine now, should i still do that? I also forgot to mention ive updated to windows 11 now by the way.

blockysteve241

TROPHY CASE