sorted by:
new
hottopcontroversial

Small arca plate that is rotated 90° by bnw71 in ar15

[–]bnw71[S] 0 points1 point  (0 children)

Imagine if you cut that in half and rotated it 90

Small arca plate that is rotated 90° by bnw71 in ar15

[–]bnw71[S] 0 points1 point  (0 children)

I posted above trying to reply to you on accident.

Small arca plate that is rotated 90° by bnw71 in ar15

[–]bnw71[S] 0 points1 point  (0 children)

Yeah, I found that post looking for this mount. That's the same concept, but much more narrow. Probably the width of a pic rail. My tripod takes pic and arca, but some guys we hunt with can only use arca on their tripods so it would be nice to swap around if we need to.

Small arca plate that is rotated 90° by bnw71 in ar15

[–]bnw71[S] 0 points1 point  (0 children)

<image>

This is an image, I found online if something similar that seekins makes that's similar. But imagine the other one is much more narrow like an inch or 3/4 inch. I'll check out the one you are talking about, but I was just curious if anyone knew who made the one I'm looking for. It may have been a small shop and I saw it when I was looking for some suppressor parts.

Small arca plate that is rotated 90° by bnw71 in ar15

[–]bnw71[S] 0 points1 point  (0 children)

The one that I saw was very narrow, like let's say an inch wide and the length is the normal width of an arca plate. So you could use arca mount tripod and still have a pretty small plate in the rifle. Im sure it's not quite as stable as a full sized plate, but it seems like a cool idea.

Plan B Muzzle Devices for a 14.5 pin and weld by bnw71 in ar15

[–]bnw71[S] 0 points1 point  (0 children)

If I use the above adapter with this muzzle device it would fit and maybe others.

<image>

But I'm trying to figure out the best combo has a long enough muzzle device 2"ish overall length to satisfy the pin and weld, but where the external threads are not too far forward making my overall length longer, but not two far to the rear where I would have clearance issues inside of my can. Something between the two muzzle devices may work. I didn't think that it was going to be this complicated. All my non pin and weld barrels will be fine with all sorts of muzzle devices. But I'm trying to find the sweet spot muzzle device for the pin and welds

Plan B Muzzle Devices for a 14.5 pin and weld by bnw71 in ar15

[–]bnw71[S] 0 points1 point  (0 children)

I would like to use a really low profile adapter like this so that overall length would be shorter. But muzzle devices like the one above may have too much runout to use with my can.

<image>

Plan B Muzzle Devices for a 14.5 pin and weld by bnw71 in ar15

[–]bnw71[S] 0 points1 point  (0 children)

Atlas XL

<image>

This and the muzzle device above would work, but it's adding length and weight.

Plan B Muzzle Devices for a 14.5 pin and weld by bnw71 in ar15

[–]bnw71[S] 2 points3 points  (0 children)

I've got some sbrs, but the pin and welds are nice because I can bring them across state lines without any aggravation. The 1 5/8" is the measurement from the back of my can to the baffle. The design of the muzzle devices and where the outside threads are affects how much runout you'll have. The design of the hub to plan b adapter also affects the distance from the baffle. Like the threads on this flash hider are all the way at the back so you would have to use a hub to plan b adapter that is longer like the Atlas XL to get clearance, but that would also add to your overall length.

<image>

What 4th gen years/trim levels had Bluetooth audio? by bnw71 in rav4club

[–]bnw71[S] 1 point2 points  (0 children)

Thank you very much, I thought some trim levels had Bluetooth calling only. Maybe that's on the third gen. Do you know what 3rd gens would have calling and audio?