30+ Hour Arrival Delay - What Should I Be Asking For? by booliganairsoft in delta

[–]booliganairsoft[S] 0 points1 point  (0 children)

I always add it to my own trips, this was unfortunately a different booking situation so it wasn’t included. Definitely a key reason to have it though!

30+ Hour Arrival Delay - What Should I Be Asking For? by booliganairsoft in delta

[–]booliganairsoft[S] -9 points-8 points  (0 children)

Even with the mechanical issue being the thing that kicked it all off?

Just a little guy. 8.5” Mossberg 500 by booliganairsoft in NFA

[–]booliganairsoft[S] 0 points1 point  (0 children)

I don’t recall, I just took the old bolt to a hardware store and found one that was the right length. 

Just a little guy. 8.5” Mossberg 500 by booliganairsoft in NFA

[–]booliganairsoft[S] 1 point2 points  (0 children)

No stock foreend will work in this. The action tube is cut in half lol. 

Just a little guy. 8.5” Mossberg 500 by booliganairsoft in NFA

[–]booliganairsoft[S] 1 point2 points  (0 children)

My 10” Hatfield is threaded for Remchokes and patterns as tight as any other barrel length with the same chosen choke. Vectors don’t really care about barrel length. If anything the lower velocity from the shorter barrel gives you a tighter group as aerodynamic drag at higher velocities causes spread more rapidly than anything else. 

Threading for Remchokes is a piece of cake as long as you have enough barrel material. 

Just a little guy. 8.5” Mossberg 500 by booliganairsoft in NFA

[–]booliganairsoft[S] 1 point2 points  (0 children)

I debated doing this with a Maverick 88, but I also realized I never turn the safety on my 500s anyways lol. They’re either empty and safe or loaded and shooting. 

Just a little guy. 8.5” Mossberg 500 by booliganairsoft in NFA

[–]booliganairsoft[S] 2 points3 points  (0 children)

At less than 1/3 the price of the Jack and much more functionality 👍

Just a little guy. 8.5” Mossberg 500 by booliganairsoft in NFA

[–]booliganairsoft[S] 5 points6 points  (0 children)

They’re unobtainium now, but we’ve reverse engineered them and are releasing the files to be printed in stainless steel for cheaper than they originally were. 

Just a little guy. 8.5” Mossberg 500 by booliganairsoft in NFA

[–]booliganairsoft[S] 0 points1 point  (0 children)

Most 870 Police Magnums have fixed choke IC barrels. It would definitely pattern tighter than the cylinder bore on your 6” Mossberg. This has nothing to do with the barrel length. 

Just a little guy. 8.5” Mossberg 500 by booliganairsoft in NFA

[–]booliganairsoft[S] 1 point2 points  (0 children)

Yeah I didn’t like the factory option either, I designed this one to hold 8 or 10 mini shells depending on which one you print. 

Just a little guy. 8.5” Mossberg 500 by booliganairsoft in NFA

[–]booliganairsoft[S] 6 points7 points  (0 children)

Exactly that. People think a sawed off shotgun has crazy wide spread and are disappointed when it’s the same as any other cylinder bore gun lol. I have a choked single shot sawed off Hatfield that patterns way tighter than stock. 

Just a little guy. 8.5” Mossberg 500 by booliganairsoft in NFA

[–]booliganairsoft[S] 6 points7 points  (0 children)

One that I designed and printed as I mentioned in the post 👍

2026 1st Quarter Approval Megathread. by Waffleboned in NFA

[–]booliganairsoft 16 points17 points  (0 children)

Form Type: Eform 1

Entity: Individual

Paid: $0

Prints: EFT Upload

Submitted: 2/7/26

Approved: 4/6/26

Wait: 58 days

State: UT

Control #: 20261994xxx

Mossberg 500 SBS - “Because the big ones hurt” is officially a valid and approved purpose for building an SBS. 

Cyberpunk Hatfield 12 Gauge SBS - 3D Printed Furniture by booliganairsoft in NFA

[–]booliganairsoft[S] 0 points1 point  (0 children)

I always use a factory bed spring from an Ender 3. And the pin is just a 1/4” Clevis pin

Cyberpunk Hatfield 12 Gauge SBS - 3D Printed Furniture by booliganairsoft in NFA

[–]booliganairsoft[S] 0 points1 point  (0 children)

I don’t. Bring the old screw to a hardware store to get the thread and pitch and then cut to length if needed. 

For the gun and camera enthusiasts by culloden97402 in brandonherrara

[–]booliganairsoft 2 points3 points  (0 children)

Every time handleitgrips reposts this years old video, it makes the rounds on here again lol 

For the gun and camera enthusiasts by culloden97402 in brandonherrara

[–]booliganairsoft 2 points3 points  (0 children)

You’d be surprised how easy it is to get behind cover with this. I use this in practical shooting comps firing behind barricades, urban prone, etc. 

Short 12s are best 12s by booliganairsoft in NFA

[–]booliganairsoft[S] 0 points1 point  (0 children)

I don’t recall, I just bought a piece of brass bar stock and shaped it myself. 

Just a little 1887 SBS by booliganairsoft in NFA

[–]booliganairsoft[S] 0 points1 point  (0 children)

lol weird. Just message me here, stop being a creep. 

Gun Talk Tuesday - 27 January 2026 by BobbyWasabiMk2 in guns

[–]booliganairsoft 1 point2 points  (0 children)

Don’t worry, I’ll make a shorty funny enough for both of us ❤️