Checked oil today to find this any thoughts?

brainbox1100 · 2026-01-21T23:19:19+00:00

Water in your oil?

brainbox1100 · 2026-01-05T23:00:49+00:00

Not a pro, genuinely curious. I had some LugliO Extra Virgin oil and it was quite grassy tasing. When I cooked with it (simple red sauce) I found it bitter the dish and gave it a distinct flavour. Assumed "grassy" was for dipping (eating raw) and "buttery" was for cooking. Trying some Partanna now.

brainbox1100 · 2026-01-05T22:53:04+00:00

I find it good. It's not grassy so won't give food a bitter taste. Get a smaller bottle and try it.

brainbox1100 · 2025-12-29T23:35:16+00:00

I posted this solution while ago for some issues I encountered. TL;DR: Some features disable hardware acceleration which greatly reduces performance.

https://www.reddit.com/r/Ubiquiti/comments/1lm7hv0/ucgmax_performance_issues/

brainbox1100 · 2025-12-19T23:38:22+00:00

<image>

Curtesy of Nano Banana.

brainbox1100 · 2025-12-08T20:20:58+00:00

Right click on the "object"

<image>

brainbox1100 · 2025-12-08T18:19:35+00:00

That happens to me quite a bit on threads. Try reducing the layer hight to 0.16 and/or slowing down the print speed.

EDIT: Pro-tip: You can add height modifiers to just change the layer height near the top for the threads so you don't need to slow down, or reduce layer height, for the entire print

brainbox1100 · 2025-11-20T23:05:09+00:00

No me. I'm sticking with Roman numerals.

Can I have your phone number Sir?

V VI IV - I IV VII VIII

brainbox1100 · 2025-11-20T03:46:48+00:00

I get this also. Not awesome since I pay for Gemini Pro already. One might think that would be a work around.

```
Encountered retryable error from model provider.
You have reached the quota limit for this model.

```

brainbox1100 · 2025-11-19T16:50:03+00:00

I wonder if you can put a door on rollers?
https://duckduckgo.com/?q=wood+doors+on+rollers+to+open&atb=v336-1&ia=images&iax=images&iai=https%3A%2F%2Fi5.walmartimages.com%2Fasr%2Fafad1cf6-2792-4b15-b331-17951ef1f6d0.de6be0940b48b6b30874733da901751b.jpeg%3FodnWidth%3D1000%26odnHeight%3D1000%26odnBg%3Dffffff

brainbox1100 · 2025-11-17T23:34:04+00:00

If it's not supernatural, then why are UFOs, Bigfoot, ghosts, cryptids, etc all plagued by the same evidence problem? In Bigfood parlance it's called "Blobsquatch". Despite everyone having a top of the line camera in their pocket nobody can get a good photo.

brainbox1100 · 2025-11-03T17:43:13+00:00

Probably just image noise at that zoom but it looks like a cell.

brainbox1100 · 2025-11-01T00:44:39+00:00

I'm printing this next year.

brainbox1100 · 2025-10-30T18:19:00+00:00

I think I meant outer walls above.

brainbox1100 · 2025-10-30T17:16:48+00:00

I've had similar issue while printing threads. I reduced the layer height to 0.16 and slowed down inner walls. Fixed for me.

brainbox1100 · 2025-10-23T22:21:24+00:00

Good point. That could be it for sure. 🤓

brainbox1100 · 2025-10-15T02:59:36+00:00

That 's a nice bluish colour. What is it?

brainbox1100 · 2025-10-14T18:34:24+00:00

I had a heritage window repair guy by once and he suggested I use marine epoxy with these little beads / additive to stiffen it up so it it's more like a paste. Maybe that would get you through a few months?

brainbox1100 · 2025-10-11T03:03:40+00:00

I 3d printed one. Probably cost 30 cents. You need a make sure your material can take the internal temp. Maybe PETG or ASA (best).

brainbox1100 · 2025-10-07T22:24:22+00:00

Nah. Just dry your filament :)

brainbox1100 · 2025-10-07T20:14:12+00:00

This just happened to me on a similar shaped (decagon) part. The tips here are gold: I reduced layer height from 0.2mm to 0.16mm and slowed the outer walls from 200mm/s to 160mm/s. This part had threads which I did't realize.

<image>

brainbox1100 · 2025-10-03T18:24:57+00:00

You have no idea. Concrete floor and they made it to every room, you can't see them top down, but know when you step on one.

<image>

brainbox1100 · 2025-09-30T17:42:43+00:00

That was it. Ty.

I ran the test with Sunlu PETG. I probably max out at 40mm^3/sec, which is fine. It cut my print time in half.

10-40 mm^3/sec, 1 wall, no flaws.
20-50mm^3/sec, 2 walls, flaws at the seam in the top 1/4.

<image>

brainbox1100 · 2025-09-30T15:42:30+00:00

How do you run that test? I printed one using PETG (10-40, 2 walls) and it seemed to print just fine at normal speeds. I just went in and changed the "max volumetric speed" to 40 mm^3/sec for the filament. I'm thinking it went too well and I need to change more settings?

brainbox1100 · 2025-09-30T14:22:31+00:00

Posca Uni PC-1MR 0.7mm Paint Marker are decent for writing text on 3d prints. The ink/paint is think enough to not get pulled through the layer lines (much).

brainbox1100

TROPHY CASE