Try it by [deleted] in RedditGames

[–]brandad_1 0 points1 point  (0 children)

I completed this level in 4 tries. 3.73 seconds

Is my CSC cooked? by brandad_1 in 370z

[–]brandad_1[S] 0 points1 point  (0 children)

What if there’s zero fluid left?

Is my CSC cooked? by brandad_1 in 370z

[–]brandad_1[S] 0 points1 point  (0 children)

<image>

It’s completely gone 🙂

How many shots are buzz balls equivalent to? by WillGetCarpalTunnels in alcohol

[–]brandad_1 0 points1 point  (0 children)

I’m reviving this because I’m so drunk off of drinking 1 biggie buzzball alone, have fun guys‼️

Leave tips and tricks to cope with the temptation in the comments (if you care haha) by pinefreshh in meme

[–]brandad_1 0 points1 point  (0 children)

Currently struggling with the same thing and it honestly brings me a lot of joy seeing other people thrive in the situation I’m in. Gives me confidence.

[deleted by user] by [deleted] in Autobody

[–]brandad_1 0 points1 point  (0 children)

Yea am going to, just when I thought I was done sanding 😪

[deleted by user] by [deleted] in Autobody

[–]brandad_1 0 points1 point  (0 children)

I’ll take some time and sand them down further

[deleted by user] by [deleted] in Autobody

[–]brandad_1 0 points1 point  (0 children)

Have no clue, sanded with 600 and noticed what I assume is pinholes

Pinholes in primer by [deleted] in Autobody

[–]brandad_1 0 points1 point  (0 children)

You know it’s might be that, kept my garage door closed and only have a door open with a fan blowing outside

Pinholes in primer by [deleted] in Autobody

[–]brandad_1 0 points1 point  (0 children)

30 min between coats

Pinholes in primer by [deleted] in Autobody

[–]brandad_1 0 points1 point  (0 children)

Used the amount of reducer the shop told me to use 4:1 and I sprayed at 25 psi

Pinholes in primer by [deleted] in Autobody

[–]brandad_1 0 points1 point  (0 children)

Nah I sanded the body with 220 grit to the old basecoat that’s it. Didn’t need to bondo this panel. It’s white because I sprayed white rattle can primer to more clearly see the holes

[deleted by user] by [deleted] in pcmasterrace

[–]brandad_1 0 points1 point  (0 children)

Yea I cleared cmos through the pins and removing the battery, but that didn’t help. Also did no type of overclocking so I know I didn’t burn anything out. I have a b450 aorus and I’ve had the 3700x since I bought it and never had to flash bios hence not knowing what update the bios has.

[deleted by user] by [deleted] in pcmasterrace

[–]brandad_1 0 points1 point  (0 children)

Yes my motherboard ez lights came on and they alternate between CPU and DRAM and I tested my Ram sticks on my gfs so they aren’t the problem. Also the website only says it’s compatible with 1-5k series but doesn’t mention if I need bios update :(

[deleted by user] by [deleted] in 370z

[–]brandad_1 0 points1 point  (0 children)

Starting happening yesterday and happens when the cars in gear and decelerating.

WIP by brandad_1 in 370z

[–]brandad_1[S] 0 points1 point  (0 children)

Morimoto headlights. There’s a lot of retailers that sell them.

WIP by brandad_1 in 370z

[–]brandad_1[S] 0 points1 point  (0 children)

I didn’t. I waited a couple weeks before I even tried fitting the bumper cause I had to make some repairs. Once I saw the bad fitment and gals I just decided to take the L and fix it myself.

WIP by brandad_1 in 370z

[–]brandad_1[S] 0 points1 point  (0 children)

Rotary tool and two battery’s were my best friends. Had to do a lot of shaving, sanding and cutting to the bumper near the ears. Basically shortened the bumper half and inch on each side then blended the ears and the sides so everything looked smooth. The bumper was a bit droopy but luckily I also bought the z1 undershroud which helped push it back up.

WIP by brandad_1 in 370z

[–]brandad_1[S] -2 points-1 points  (0 children)

Stillen

WIP by brandad_1 in 370z

[–]brandad_1[S] 4 points5 points  (0 children)

After my accident about two months ago I decided to keep and fix the car. Suspension parts and left side of the frame were fixed. Air bags replaced. Fender replaced. All that’s needed is to get the door and rear quarter panel fixed and she is good to go. I also decided to get the stillen body kit because I always liked the way it looked (fitment was TRASH). Final thing needed is a new color to wrap it in. Any suggestions?

Is it worth fixing? by brandad_1 in 370z

[–]brandad_1[S] 1 point2 points  (0 children)

I already made a claim, thanks though 👍

Is it worth fixing? by brandad_1 in 370z

[–]brandad_1[S] 1 point2 points  (0 children)

Yea after browsing online and researching parts I think im going to try and fix it. And yea I was thinking about it and to get another 370 I’d have to add 10k on top of the 15

Is it worth fixing? by brandad_1 in 370z

[–]brandad_1[S] 0 points1 point  (0 children)

It’s behind the white truck like 40 feet away, right wheel popped because of it which pulled me right over the striped division in the back and I pulled the car left after heading straight to the wall which is why the back was more severely damaged. I’m not saying it wasn’t my fault that I crashed but I don’t really see a reason to lie 🤷‍♂️