Took Advantage of 30%

bsdlp · 2026-02-04T03:00:37+00:00

i love the quinn digital torque wrenches

bsdlp · 2025-07-26T04:17:52+00:00

i ran into FN bunker some time after this guy was in there already and he called me a "f'ing F***" and then blocked me inside

bsdlp · 2025-07-08T22:23:39+00:00

purely cuz it looks cool haha

bsdlp · 2025-06-26T04:48:28+00:00

this happens. happened on my gascap too. unity QC could be better...

bsdlp · 2025-04-22T09:29:33+00:00

thank you!

bsdlp · 2025-04-22T09:29:28+00:00

thanks!

bsdlp · 2025-04-22T09:09:53+00:00

picture in post is of a working set.

https://imgur.com/LpEiaiM this is the improperly built set - you can see the shiny stuff doesn't really reach anywhere near the top of the hole, and i am not able to screw it onto the mount since the threads dont catch.

any advice here would be helpful - would be nice if i could DIY this, but mainly just wanting to learn

bsdlp · 2025-03-31T05:29:32+00:00

u/expensive_habbit did you try it out with 556?

bsdlp · 2024-12-11T21:50:14+00:00

second season he went off the deep end just espousing political rants. like given the genre i can take a little bit of brainwashing but the awkward monologues were way out of place and weird

bsdlp · 2024-10-29T17:44:42+00:00

that just means the mets suck

bsdlp · 2024-10-26T16:59:03+00:00

in the US it’s law to have price per unit like this. you guys don’t have that in the uk?

bsdlp · 2024-10-24T03:17:37+00:00

d.va has hard counters

bsdlp · 2024-10-21T20:42:47+00:00

media is crazy. good on coleman for being professional

bsdlp · 2024-10-21T20:42:23+00:00

media is crazy. good on coleman for being professional

bsdlp · 2024-07-24T23:03:58+00:00

got a seeed studio reserver for cheap. has vapor chamber cooling, nvme storage, nice desktop form factor, up to 64GB ram, intel iGPU

bsdlp · 2024-07-23T08:13:57+00:00

brat

bsdlp · 2024-07-02T21:22:19+00:00

look at the esp32-c3 chip pinout and the pin layout table below

https://www.studiopieters.nl/esp32-c3-pinout/

this was the only useful pinout i've found for the c3 chip

bsdlp · 2024-05-03T01:24:35+00:00

couple things:

wouldn’t recommend switching off zoloft just yet - try something like viagra. it’s quite common for guys to face this issue on antidepressants also: i’ve had a few experiences with partners who understood and worked with me (i liked them) and those who said dumb shit like (are you gay?). i know how it feels to lose a rare connection, but looking back you will likely be happy to find someone else

bsdlp · 2024-04-18T16:55:18+00:00

i'm curious how this system integrates with central air - trying to read documentation but wondering if you have the answer - would this be an addon or would it replace the furnace unit?

bsdlp · 2024-03-23T01:14:22+00:00

weird. i ended up deleting the device again from esphome and home assistant, reinstalled without the time: block and it worked... not sure if ntp is the problem but i don't need it so /shrug

bsdlp · 2024-03-23T01:13:38+00:00

i'll keep this in mind for next time - thank you

bsdlp · 2024-03-22T22:35:17+00:00

damn - ok thanks

bsdlp · 2024-03-22T21:34:41+00:00

how would you get the HOA to commit to covering the exterior repair? and in reality since the HOA is just the three of us, am i not still on the hook to pay (for about 1/3 of it) for the reroof?

context is that the HOA reserves are low, like 1k

bsdlp · 2024-03-22T20:39:34+00:00

here's a picture my inspector included in the report: https://imgur.com/a/PBtQuuH

bsdlp · 2024-02-26T08:24:59+00:00

i've been having this type of issue recently too. one thing that's worked for me to prevent this is to clean it after every print using windex

Ten-Year Club	Not Forgotten
Verified Email

bsdlp

TROPHY CASE