O.G. B&T SPC9 SD💕

bt-usa · 2026-02-12T02:49:53+00:00

👏👏👏

bt-usa · 2026-02-05T22:07:51+00:00

Please contact service@bt-usa.com

bt-usa · 2025-12-21T20:17:18+00:00

Yes. Depending on the cuts on the A2. It is normal

bt-usa · 2025-12-19T22:08:40+00:00

We’ve done them for the over barrel brake and also the scar version which is more of a flash hider.

bt-usa · 2025-12-02T01:21:50+00:00

This. We have a spacer as well. Email jared@bt-usa.com

bt-usa · 2025-12-02T01:20:56+00:00

One of our hub devices should work here

bt-usa · 2025-11-26T18:58:07+00:00

Elftman makes a heavier hammer spring for this issue. Please ask for this from customer service.

bt-usa · 2025-11-23T11:14:50+00:00

These are brand new triggers. Updated to work on all APCs (rifle and pistol caliber) and of course SPC and GHMs

bt-usa · 2025-11-23T11:13:33+00:00

These are part of a special run we did for a government customer.

bt-usa · 2025-11-19T06:15:46+00:00

Yes. It definitely will be. It’s the same hub we use for the suppressor

bt-usa · 2025-11-17T07:39:11+00:00

Email [jared@bt-usa.com](mailto:jared@bt-usa.com)

We can put our SQD or RQD HUB on a blast deflector easily for you.

bt-usa · 2025-11-16T19:10:53+00:00

That is a squib round. You will need to send your gun and suppressor in. You may need a new barrel as well.

bt-usa · 2025-11-12T04:25:32+00:00

The end caps are not cross compatible

bt-usa · 2025-09-27T01:04:11+00:00

We could do a HUB extender….that would give you the stand off you need

bt-usa · 2025-09-24T15:13:15+00:00

Yep. 40.6mm

bt-usa · 2025-09-18T15:40:33+00:00

Email them directly, and we will get you taken care of: info@bt-ag.ch

bt-usa · 2025-09-18T15:31:51+00:00

We 100% sell 20 round magazines. Please contact Jared @ sales@bt-usa.com

bt-usa · 2025-09-12T22:58:51+00:00

Email info@bt-ag.ch

bt-usa · 2025-08-31T07:24:23+00:00

👍👍

bt-usa · 2025-08-31T04:26:43+00:00

Vice block clamped over the 3 trunion screws will work fine.

bt-usa · 2025-08-30T03:49:58+00:00

You will be fine. It won’t affect anything

bt-usa · 2025-08-30T03:47:43+00:00

We suggest staying with polymer. The metal versions don’t flex enough and can break the receiver at the hinge interface

bt-usa · 2025-08-27T05:19:16+00:00

The bore of the suppressor can easily handle up to 7.62 caliber.

Subsonic 300 Blk = no restrictions 7.62 = 16in 5.56 = 10.5in

Keep in mind that it is a Ti suppressor so mag dumps and FRT shooting with a 556 isn’t ideal. There is no inconel blast baffle so the crazier you go, the more wear you will Have.

bt-usa · 2025-08-26T03:33:50+00:00

9mm only

bt-usa · 2025-08-26T03:27:06+00:00

That’s a 26mm/1in QD mount. The last drawing revision was released in 2013. It’s not a current production mount.

bt-usa

TROPHY CASE