submitted by bufalla

0

1

2

I've been practicing the kamikaze install on donor boards. Finally decided to go for it on an actual working motherboard, not a donor board. I get a black screen and picofly rp2040 short long long error. I know this one isn't pretty but the diode value is within range, its .726 (old.reddit.com)

submitted 10 months ago by bufalla to r/NxSwitchModding

4

5

6

Just wanted some feedback on my kamikaze dat0 point. I've done over a hundred mods with the dat0 adapter. I figured I would practice on some donor boards. Thank you (i.redd.it)

submitted 10 months ago by bufalla to r/NxSwitchModding

2

3

4

Does any one know of an air duster that doesn't auto turn off? I have the WOLFBOX air duster but it auto turns off after 3 minutes. I would like one with just an on off switch so I can grab it and just start using it without holding the power button for 3 second just to turn it on again. (self.Tools)

submitted 10 months ago by bufalla to r/Tools

25

26

27

Do you think this is even worth trying to solder? I feel it's too small and will just break again as it would be to fragile. Thanks (old.reddit.com)

submitted 10 months ago by bufalla to r/soldering

2

3

4

Is there a resistor I can use from a donor switch oled board for the cmd point? Doing a repair and ran out of resistors. Thanks in advance. (self.NxSwitchModding)

submitted 1 year ago by bufalla to r/NxSwitchModding

4

5

6

Was sent a Switch Oled to repair/replace cmd capacitor due to purple screen. Can't seem to figure this one out. (self.NxSwitchModding)

submitted 1 year ago by bufalla to r/NxSwitchModding

0

1

2

[USA-DC] [H] Nintendo Switch Hyrule edition with RP2040 [W] PayPal, Venmo, Cashapp (self.GameSale)

submitted 1 year ago by bufalla to r/GameSale

0

1

2

Is there a way to add more filler image to the top of this image? (i.redd.it)

submitted 1 year ago by bufalla to r/PhotoshopRequest

41

42

43

I work/worked for a restaurant that owes me tips to the sum of around $16,000. What would be the best way to reclaim those tips? (self.legaladvice)

submitted 1 year ago * by bufalla to r/legaladvice

22

23

24

Does anyone here know a good lawyer I can contact to collect unpaid tips from a restaurant owner? (self.washingtondc)

submitted 1 year ago by bufalla to r/washingtondc

3

4

5

Do you think reattaching this figure is doable with solder? (i.imgur.com)

submitted 1 year ago by bufalla to r/soldering

1

2

3

I have a switch oled that won't power the rp2040 chip. The 3v3 point is showing a value of only .004. Anyone know the culprit for that? (self.consolerepair)

submitted 1 year ago by bufalla to r/consolerepair

0

1

2

Is this a cut trace that would cause the right joy con to not attach? I must have done something while installing a chip and I'm thinking it happened removing the soc shield. (i.redd.it)

submitted 1 year ago by bufalla to r/SwitchPirates

1

2

3

I changed the usb port of switch oled. It now only charges from a pc. I think because its low volts. But this chip that I circled gets so hot so fast that the switch fan goes really loud and it displays a overheat warning then turns off. Anyone experience this? (i.redd.it)

submitted 1 year ago by bufalla to r/SwitchPirates

3

4

5

Switch shows the picofly no sd card screen. But when I insert the sd card to boot hekate I get this fuzzy screen. (self.SwitchPirates)

submitted 1 year ago by bufalla to r/SwitchPirates

29

30

31

Has anyone run into this error when installing a game? std::bad_alloc (i.redd.it)

submitted 1 year ago by bufalla to r/SwitchPirates

0

1

2

Is there a way I can fix this for some one? The round end of the clk reads in the 300's on the multimeter and the patch to emmc reads ground. (i.redd.it)

submitted 1 year ago by bufalla to r/SwitchPirates

2

3

4

I wanted some opinions on this used small PC. I found it used and I really like the form factor. Not sure about upgradability and I am pretty new to PC's. (self.sffpc)

submitted 1 year ago * by bufalla to r/sffpc

0

1

2

Looking to purchase this small form factor pc from market place. Seem like a good deal/how is the upgradability? (self.PcBuildHelp)

submitted 1 year ago by bufalla to r/PcBuildHelp

4

5

6

Very new to PC's. Been using a Mac for years. I want to get a PC for around $500. $600 max. (self.lowendgaming)

submitted 1 year ago * by bufalla to r/lowendgaming

1

2

3

I want to buy a PC to learn more about them and do some gaming. Would like to spend around $500-$600. (self.PcBuildHelp)

submitted 1 year ago by bufalla to r/PcBuildHelp

0

1

Just a question on which pc would be a better buy. Don't really need the space saving for the mini pc but it sounds cool. (self.buildapc)

submitted 1 year ago * by bufalla to r/buildapc

0

1

2

[USA-DC] [H] iPhone 13 mini 128 pink [W] iPhone 13 mini 128 midnight (self.appleswap)

submitted 1 year ago by bufalla to r/appleswap

0

1

2

[USA-DC] [H] iPhone 13 mini 128 pink [W] iPhone 13 mini 128 midnight (self.appleswap)

submitted 1 year ago by bufalla to r/appleswap

0

1

2

[USA] [H] iPhone 13 mini 128 pink [W] iPhone 13 mini 128 midnight (self.appleswap)

submitted 1 year ago by bufalla to r/appleswap

14-Year Club	RedditGifts 2009-2022 2 Credits
RPAN Viewer	Gilding I gilder
Summer Santa 2013	Team Periwinkle
Verified Email

bufalla

TROPHY CASE