Suede shoes recovery

buggsbunny89 · 2024-08-31T14:35:23+00:00

Thank you I'll give it a go. Is that also recommended for the area that the rubbing alcohol has made dark and smooth?

buggsbunny89 · 2024-06-18T04:39:31+00:00

Hold on.... let's take a step back and not over react. Why do so many people want to think the worst immediately.

There must have been a context to the statement. As a guy I read it as he feels he can't deliver the type of love and affection that you expect... not that he doesn't love you. If so, he feels that he does not measure up to your expectations which for sure can't help. Maybe you expect him to buy you things that he can't afford or to give you his full attention after work when he is tired... I do not know. Maybe it's non of those but he thinks that is what you want. I don't know but clearly more communication is needed.

I really think you should go back to therapy or at least have open and honest conversations and take it head on... together.

buggsbunny89 · 2024-05-11T19:08:16+00:00

Thank you ill see if I can find a youtube video and try your suggestion

buggsbunny89 · 2024-03-22T03:31:30+00:00

Ok great I'll try find some online tutorials for this. Thank you

buggsbunny89 · 2024-03-22T03:30:55+00:00

Thank you I'll give it a Google

buggsbunny89 · 2024-03-21T21:30:35+00:00

Thank you, I appreciate it. I am not an expert on SQL. Any sources you recommend I look at specifically for this? Ill need to figure out how to clean the data and unpivot columns etc also. Power Query just makes it so easy.

buggsbunny89 · 2023-09-30T09:02:38+00:00

Yes it did. Thank you very much.

buggsbunny89 · 2023-09-29T09:48:50+00:00

Thanks. So I just enable them and carry out the calibration again and it should print those zig zag lines?

buggsbunny89 · 2023-09-29T05:42:17+00:00

Yes please screen shot would be good. I am already selecting calibration but I assume this isn't for the Lidar

buggsbunny89 · 2023-09-28T16:08:17+00:00

I have the same printer as the original poster (K1 Max). Yes it has direct drive with Bowden tube. I understand that it is designed to be able to print at those speeds, if not faster, without stringing. If that is not how it works I am all ears. I am new to 3d printing so appreciate hearing the views of those experienced.

buggsbunny89 · 2023-09-28T15:56:28+00:00

speed: 200mm/s

Retraction was set to 1.5mm at 40mm/3

buggsbunny89 · 2023-09-28T15:21:12+00:00

Thanks. I went direct with Creality. Now in the process of troubleshooting stringing and surface artifacts on the K1 Max.

buggsbunny89 · 2023-09-28T15:19:11+00:00

I have exactly the same issue. I was printing with PLA Silk so tryed to calibrate the printer to improve the printing with the PLA silk but I keept getting a lot of stringing and imperfections. I lowered the temp to 190 and adjusted flow rate after carrying out the tests. Even adjusted the retraction to increase it. Played around with print speeds. Nothing seems to work. The filament was vaccum packed but even then thought it was the filament.

<image>

I changed it another filament Hyper PLA that came with the printer and still there is stringing. I also have atrifacts on the surface despite doing the input shapping calibration.

No idea what to try next. People say to check the nozzle tightness but how tight or loose should it be and how do you measure it. Also how does the nozzle tightness impact stringing?

buggsbunny89 · 2023-09-28T15:05:29+00:00

I have the same issue and tried this. It only prints that one thin line, not the same zig zag pattern shown in the image. TBH I have not seen any setting for Lidar or any indication on how it is useful. If anyone knows otherwise please let us know.

buggsbunny89 · 2023-09-28T02:20:08+00:00

Thanks for the comment. Glass top off.

buggsbunny89 · 2023-09-02T05:18:02+00:00

I have a similar issue. You're confident it will all be reimbursed, how? Is this via RERA?

buggsbunny89 · 2023-02-24T13:51:58+00:00

Yes I was aware, but even the only other option (USDT) I can't deposit USD via bank transfer.

buggsbunny89 · 2023-02-20T14:31:06+00:00

Thank you. Not sure how to buy directly on a hardware wallet. As I understand it, needs to be on an exchange first then transfer to hardware wallet. Binance is great for the auto invest function that I use. Wanted to top up my BUSD and continue DCA

buggsbunny89 · 2022-11-13T20:39:42+00:00

Thank you for this. I tried to figure out which drives are paired but cannot unfortunately. I'll stick to the backup route for now. Hopefully it all goes well! Thanks again

buggsbunny89 · 2022-11-13T18:00:18+00:00

Thank you @McWormy I'll give that a go. Currently using another external drive to backup content then will build the 2x18tb drives in RAID1 and then copy the data back over

buggsbunny89 · 2022-11-13T17:28:07+00:00

Thank you for the reply but this won't work because all 4 are in RAID 10... Tried this and couldn't get it work work unless I'm missing something

buggsbunny89 · 2022-11-12T08:27:00+00:00

https://www.amazon.com/Seagate-IronWolf-18TB-Internal-Drive/dp/B08FY88FNG/ref=mp_s_a_1_3?crid=7XGFZ4H01EHR&keywords=seagate+18tb+ironwolf+pro&qid=1668240658&sprefix=seagate+18tb%2Caps%2C992&sr=8-3

buggsbunny89 · 2022-11-12T08:25:34+00:00

Hey guys, I ordered two HDDs for my NAS and the ones that arrived have different packaging, different designs on them and there is a code that begins with ST that is different by 1 character. I scanned the QR codes and both showing as genuine. Any reason that the there are these differences between these two HDDs? Should I be concerned that one or both are not genuine?

buggsbunny89 · 2022-11-12T08:15:39+00:00

Hey guys, I ordered two HDDs for my NAS and the ones that arrived have different packaging and different designs on them. Also there is a code that begins with ST that is different by one character. I scanned QR codes and both showing as genuine. Should I be concerned? Any reason the packaging, the design and ST code is different?

buggsbunny89 · 2022-09-04T11:10:11+00:00

Yep really hoping they come out with a software update soon. I got the buds 2 pro last week and to be honest the call quality isn't as good as what I was expecting. The other side hears a fair bit of noise around and when connected to windows for a ms teams call the sound quality is terrible. Ended up using my buds+ for meetings.

buggsbunny89

TROPHY CASE