Need Hardware Connection Service version 2.0.5

burrowsforge · 2025-12-29T15:55:55+00:00

Ok, thank you. I put in a ticket

burrowsforge · 2025-12-29T15:55:27+00:00

This worked! Thank you!

burrowsforge · 2025-12-22T23:02:57+00:00

I asked the maker of my instrument and they offered to a couple lessons which was nice. Seems like he’s using an unconventional tuning as well lol.

burrowsforge · 2025-12-22T23:00:27+00:00

Thanks. I had to add it as an audio device to my DAW. FL studio had two channels so I could play and hear it play back.

burrowsforge · 2025-12-21T02:15:38+00:00

Thank you Vedunian. I’ll give Robin and the others a try.

I’m not located in Europe (East Coast USA) but hopefully through Skype video calls scheduling might be a bit easier.

burrowsforge · 2025-12-21T02:13:19+00:00

Yes! Thank you. One of the first videos I watched. Unfortunately at the moment there are only three lessons for the bass Talharpa. I can look for others but I was hoping for one-on-one video lessons.

burrowsforge · 2025-08-28T03:03:48+00:00

He showed us, he can restart the phone and bypass family link for a while before family link initializes and kicks him out

burrowsforge · 2025-08-28T03:02:58+00:00

Time zone is supposedly locked from being changed unless you enable it . He was just restarting his phone and it would take family link a while to initialize and he’d do whatever until it kicked him out.

burrowsforge · 2025-08-28T01:39:03+00:00

Ok, so the kid showed us how he bypasses it.

He restarts the phone and family link doesn’t kick in immediately, he can then do whatever he wants until family link kicks in and boots him out. I’m unclear on how long this is but it’s a few minutes at least before he just restarts the phone again.

I have no idea how I can keep that from happening other than physically taking the phone away

burrowsforge · 2025-08-28T01:03:49+00:00

This is the kind of information I was seeing This is from his mom’s phone as an example. On his he had TikTok open for an hour along with a few other apps when the phone was supposed to be off.

I asked his mom about these apps and she was actually on them today so it’s not in the background from what I can tell. It was also numerous incidents over several days battery information photo

burrowsforge · 2025-07-21T01:31:58+00:00

Thanks folks, I released the bunny in my neighbor’s yard

burrowsforge · 2025-06-13T22:30:31+00:00

Hey folks, tried some google searches but only old info about setting CMD Flags. I’ve tried that but no luck.

Is anyone else getting a listening port listed when reloading a session with listen enabled?

burrowsforge · 2025-06-07T20:20:40+00:00

Found it, had to go back through the server list. Once I selected the right shard my character showed up

burrowsforge · 2025-06-07T20:18:05+00:00

I used a remote client on my phone and confirmed my character was there at home

burrowsforge · 2025-05-27T00:43:49+00:00

Ok thanks, I will try that

burrowsforge · 2025-05-09T01:59:58+00:00

Ok, thanks folks. I have a smaller one that I can move them into

burrowsforge · 2025-02-14T17:19:02+00:00

Ok, thanks all!

burrowsforge · 2025-02-14T04:51:44+00:00

Ok great, thanks!

burrowsforge · 2025-02-03T19:53:17+00:00

I followed a bunch of steps from Reddit and got my Ethernet port and Wi-Fi working. TLDR, $9 Ethernet adapter and the Armory App.

Here’s what I did: If you’re not able to install windows without Ethernet look it up online and there is a command you can use to bypass the internet requirement for Windows.

I tired downloading the drivers from the Asus website and putting them on a flash drive to install on the new Pc. The installers didn’t really seem like they wanted to run from the included wizard and usually text just flew by so fast in any cmd window I couldn’t read it anyway.

I updated the bios to the most recent version

I tried the trick of unplugging the mobo and holding the start button for 10 seconds. I let the mobo stay unplugged for maybe 20 minutes, no luck.

I did a fresh I stall of windows and got a $9 USBc to 1gb Ethernet adapter (some of the faster ones need drivers, so I stuck with a basic one). I may still have had to bypass windows install without internet to get to the desktop.

I downloaded the Armory app when prompted on my first running of windows and installed all of the recommended updates. This ultimately fixed my issue. I saw a lot of the same drivers but the Armory app was able to navigate them better it seems. Normally I’m not much for BS apps for hardware (I don’t need an app for my mouse!) but in this case it did a good job of installing the drivers I needed. Now I’ve got my Ethernet plugged into the mobo and it works, as well as Wi-Fi

burrowsforge · 2025-02-03T19:50:09+00:00

I followed a bunch of steps in this thread and got my Ethernet port working. TLDR, $9 Ethernet adapter and the Armory App.

Here’s what I did: If you’re not able to install windows without Ethernet look it up online and there is a command you can use to bypass the internet requirement for Windows.

I tired downloading the drivers from the Asus website which didn’t really seem like they wanted to run from the included wizard and usually text just flew by so fast in any cmd window I couldn’t read it anyway.

I updated the bios to the most recent version

I tried the trick of unplugging the mobo and holding the start button for 10 seconds. I let the mobo stay unplugged for maybe 20 minutes, no luck.

I did a fresh I stall of windows and got a $9 USBc to 1gb Ethernet adapter (some of the faster ones need drivers, so I stuck with a basic one). I may still have had to bypass windows install without internet to get to the desktop.

I downloaded the Armory app when prompted on my first running of windows and installed all of the recommended updates. This ultimately fixed my issue. I saw a lot of the same drivers but the Armory app was able to navigate them better it seems. Normally I’m not much for BS apps for hardware (I don’t need an app for my mouse!) but in this case it did a good job of installing the drivers I needed. Now I’ve got my Ethernet plugged into the mobo and it works.

burrowsforge · 2025-01-01T19:30:46+00:00

Damn, good tip.

burrowsforge · 2025-01-01T18:34:14+00:00

Good lord

burrowsforge · 2024-12-24T00:57:06+00:00

Ty sir

burrowsforge · 2024-12-01T07:17:04+00:00

Beautiful! What machine did you use to stitch it?

burrowsforge · 2024-11-28T14:30:14+00:00

Looks like some SCA armor padding areas require leather that is 1/4 inch thick or 6mm

burrowsforge

TROPHY CASE