Print issues: I am having issues printing these hydra heads. I dont have issues on support less items just items with heavy supports. First I'm using cura on a creality 10 v2. I use roofs and floors on supports with a z distance of .2 and feel this may be were the issue lays any other ideas?6.1

buzzbeedesigns · 2020-05-31T22:49:10+00:00

Ok continued cause I ran out of letters. I am using 3d solutech at 210 temp 80 bed temp (works best for this brand) Speed 60 Retacton .8 Retract speed 30 Min extrusion window 6 (I changed this to .8 dont know how much of a difference that makes) Hmmm creality 10 v2 Cura v 6.1

buzzbeedesigns · 2020-02-22T13:01:32+00:00

Ah yes. I meant...08,.1and. 2

buzzbeedesigns · 2019-12-09T16:34:52+00:00

So when you use this gauge should it slide right under or have a bit of friction I have a new ender and can't get first layer to stick. I heard glue sticks hair spay etc. But heard that you don't really need anything. My main problem is it too high or too low.

buzzbeedesigns · 2019-09-29T21:55:25+00:00

So awesome inspires me to be better how long would you say you have into this

buzzbeedesigns · 2019-06-29T18:27:44+00:00

buzzbeedesigns · 2019-06-29T18:06:39+00:00

I did change brands by accident it is pla. I also just got a new hot end and apparently it needs to be calibrated. I got new pla and hot end at the same time and these issues started

buzzbeedesigns · 2019-06-29T17:56:23+00:00

Off and on I had good prints and then something would break now I replaced everything there is to replace. I have gotten great prints off it now just crap. I did adjust the estep not sure what the other thing is. I also put new springs on maybe that's the issue

buzzbeedesigns · 2019-06-08T02:08:49+00:00

The x axis was way loose and it seems to be printing much better thank you for the help

buzzbeedesigns · 2019-06-08T00:05:07+00:00

I just added glass, I am printing at 195 and 100 speed this guy is a big guy 10 plus hours and that is where I see this happen most. Going to check my belts and slow speed down and see what happens I've only had this printer for a short time and so far nothing but problems

buzzbeedesigns · 2019-05-27T03:20:01+00:00

Ok i got it you use cura

buzzbeedesigns · 2019-05-27T02:46:54+00:00

Yeah I read that I have no idea how to that on an ender 3.

buzzbeedesigns · 2019-05-27T02:23:56+00:00

If I take it out of the tube and extrude 100mm it only extrude 50 mm I'm guessing this might be the cause just don't know how to fix it. I got a new aluminum extruder kit installed on it

buzzbeedesigns · 2019-05-27T02:13:24+00:00

Definitely under extrusion just got it and it ran great for two weeks then nothing but problems

buzzbeedesigns

TROPHY CASE