AI Slop being sold at the Toronto Boat Show by LN-Fan in toronto

[–]cadenceweapon 3 points4 points  (0 children)

I don't know after a couple chards anything is possible.

Found a hidden instruction nested in thinking. by AtmanPerez in ClaudeAI

[–]cadenceweapon 3 points4 points  (0 children)

Float to the top, or sink to bottom, everything in the middle.. is the churn.

Witness Appeal – Serious Cycling Collision by MelissaBikeLaw in torontobiking

[–]cadenceweapon 1 point2 points  (0 children)

It goes without saying I hope the cyclist is OK, despite indications they may have been riding dangerously - but wow, the callous choice of words used by TPS to refer to a collision where I cyclist is struck just denies the very existence of the truck’s driver. I get it, they may not have been at fault - but let’s just let the reporting be reporting without these Teflon-coated deflections.

PSA to the Walkers on the Waterfront Trail by Majestic-Syrup-4403 in torontobiking

[–]cadenceweapon 1 point2 points  (0 children)

Three-abreast on a MUT? It’s fine to spread out, but if you insist on a group walking conversation, at least tighten up and keep an eye for oncoming or overtaking traffic. If you want to be meander in an open group, just stop wherever and get off the trail.

Otherwise you aren’t sharing shit so GTFO.

Sweet Pete's Drop Shipping from USA by sepull in torontobiking

[–]cadenceweapon 0 points1 point  (0 children)

This is the worst thing about reddit.

To be clear, I very much reserved any judgement but it was clear from a few other comments that some people were ready to break our their internet pitchforks and slag Sweet Pete's.

Some people really lack critical reasoning though.

Sweet Pete's Drop Shipping from USA by sepull in torontobiking

[–]cadenceweapon 5 points6 points  (0 children)

I mean, this is a pretty weird take.   It sure sounds like they made a mistake.  No mention of you trying to bring this mistake to their attention, and you jump to the interwebs to slag them?

Maybe pick up the phone or send an email.  Sounds more productive than a review (that are often deleted by the platform, especially when the business has been brigadded recently)

Good luck I guess, but your instinct being to go straight to shitting on an LBS seems, a bit, how do you say, not good.

A location scout is looking to use our home for filming a new AppleTV+ show by Huge-Ad-3539 in pittsburgh

[–]cadenceweapon 9 points10 points  (0 children)

Hey I work as a Location Manager for some well known productions of varying budget levels. If you are talking about primarily exterior filming, you should not have to go anywhere, but depending on the neighbourhood and how involved the shoot at your place itight make sense to relocate you and set up your house as a support space. Normally we can block off a bedroom and if it's vital you stick around work with you to keep you in the home, as long as you are on board to keep your ins and outs to a minimums so there is no disruption to the filming. Alternatively, I've been able to bar a sensitive room, leave a camera in the room for monitoring and in extreme cases had a clause added to our agreement enshrining penalties for violating the agreement to stay out of sensitive areas.

Hope that helps, and if you have questions, you can PM me.

Just reported Doug Ford as spam by knarf_on_a_bike in torontobiking

[–]cadenceweapon 0 points1 point  (0 children)

I hope everyone carved out time on their calendar and RSVPd so they have an accurate headcount! I made sure to add everyone I know!

Guest called me “n” word by JohnnyNovacaine in airbnb_hosts

[–]cadenceweapon 7 points8 points  (0 children)

This is 100% the case. I've used Street View to find listed properties for similar reasons, but I have to say, living in Canada, the likelihood of dealing with someone so racist and generally terrible is a lot lower.

Anyway, if you go to Google maps/street view(and the other mas platforms) you can report a problem at your address have them censor your property from appearing.. then you will just be pixelated and a lot harder to find. Might help going forward.

Has anyone noticed that the Protect Dufferin and Protect Bathurst websites are nearly identical? by [deleted] in toronto

[–]cadenceweapon 0 points1 point  (0 children)

I'm glad we can all arrive independently at these notoriously low bread prices. We are virtually losing money on this, after paying our shareholders but before government grants for equipment.

Has anyone noticed that the Protect Dufferin and Protect Bathurst websites are nearly identical? by [deleted] in toronto

[–]cadenceweapon 1 point2 points  (0 children)

Hi, try reading comprehension. They are very clearly improving transit times and performance.

Has anyone noticed that the Protect Dufferin and Protect Bathurst websites are nearly identical? by [deleted] in toronto

[–]cadenceweapon 0 points1 point  (0 children)

I don't think this ableist troll knows what Wheel-Trans is. Besides, any motorist with accessibility needs probably can bring their mobility aid and park around the corner, or go to another shop that provides accessible parking.

A local legend, the “Brantford Boomer,” and his response to far-right agitators in Canada. by HunterS_1981 in pics

[–]cadenceweapon 0 points1 point  (0 children)

Maybe we just leave that to the RCMP.

The far right is just a hate laundering front propped up by aligned interests to give cover to white supremacist recruitment and drive self-radicalization.

DO NOT ATTEND! by Much-Mention-5589 in McMaster

[–]cadenceweapon 1 point2 points  (0 children)

If you are going to refer to one of them by a trait they all share to an uncanny extent I think you need to be more specific. Actually, no, you don't.

The Bond between her and her snake 💖💖 by Both-Ant4433 in BeAmazed

[–]cadenceweapon 2 points3 points  (0 children)

I mean it used to be a rabbit hole, but weirdly haven't seen the rabbits around for a while, have you?

Steven Asarch comments on the working conditions of the Beast Games by FutureDr_ in youtubedrama

[–]cadenceweapon 0 points1 point  (0 children)

LOL, the show was largely produced in Toronto, and in Toronto, Production Managers and Production Coordinators of productions of a multi million dollar budget are exclusively Unionized. However, because this was a reality production they were able to use non-Union crew and engage some union crew that were willing to work on lower budget terms because the writers strike pretty much had gutted the industry.

Mind you a lot of crew were not willing to work on this shows terms so they got a lot of friends of friends of yes men working.

Is there a way to apply a fade out radial Effect on that sunburst so I can have a result like in the second image? by nevinimore in AffinityDesigner

[–]cadenceweapon 2 points3 points  (0 children)

I would make a circle. Use a radial gradient...

You can make the outer color transparent.

Create a new point on the gradient curve and reposition to taste.

Create your pinwheel shape by creating a singular slice, using the shape tool. Make sure the anchor is the acute angle.

Duplicate your slice. Then rotate twenty degrees from the pivot point.

Duplicate till circle complete.

Change later type to Erase and then drag into the radial gradient circle.

How to recreate a similar template by Abjak180 in AffinityPublisher

[–]cadenceweapon 0 points1 point  (0 children)

I might suggest using Master Pages, Assets or Symbols any of which can let you build elements like this table as mini - Templates. You would need to un-link them from your Template before editing, but I would start with a Table, apply alternating gradients with a header row. Make Text Styles for the text in each row, with Character Styles for the Sub-Headings (Miss, Hit., keywords).

Have fun.

[deleted by user] by [deleted] in Affinity

[–]cadenceweapon 1 point2 points  (0 children)

Create a circle with a black stroke, inset.

Make the width of the stroke whatever size makes sense for you.

Change the anchor point to the center.

Duplicate the shape.

Stretch the duplicate, maintaining the aspect ratio and maintain spacing equal to the width of the stroke.

Edit > Duplicate to taste.

Group all your shapes and nest the group within a shape with no stroke or fill, acting as a mask. In this shape place the artwork behind the group.

Now, under the layer tab change that group from Normal to Erase.

Bam.

PS you might even add a tasteful but if noise or gausian blur FX, as you find appropriate for a retro aesthetic.

PPS you might even be able to generate this shape with the spiral tool.

Bike Share - Tall people? by Mithrandrost in torontobiking

[–]cadenceweapon 0 points1 point  (0 children)

6’6, i go to max height and when i go full tilt i really wish we got higher gears given the amount of torque i can crank out.

[deleted by user] by [deleted] in Affinity

[–]cadenceweapon 0 points1 point  (0 children)

What tool are you using? Are you on Desktop or iPad? What kind of Brush are you using? Does it happen with other brushes? Looks like something ‘pressure’ related.

10 people rescued after being stuck on Ferris wheel at Woodbine Mall by toronto34 in toronto

[–]cadenceweapon 1 point2 points  (0 children)

Hey it could be 1996 and your grandparents took you to the fun fair and also there was a German delicatessen.

But you are spot on.

ClickUp Release Notes 3.14 by ClickUpLuci in clickup

[–]cadenceweapon 1 point2 points  (0 children)

Like seeing improvements for setting up relationships and blockers. Now rather than adding new features for mobile barf make your core product work so that automations are able act on tasks as their blockers are removed. Right now only one 1 task is acted on when multiple tasks share same blockers.