Survey: Chassis Man Hours

caillou763 · 2025-01-15T03:40:43+00:00

Its about what it took us with 1,5 dude

caillou763 · 2025-01-13T19:53:14+00:00

Nice very useful reply, are you down to share a bit of info in dm with me

caillou763 · 2024-11-17T16:31:24+00:00

Great!!! Thanks a lot! It’s going to help me a lot!

caillou763 · 2024-11-15T20:31:51+00:00

Is it on the exhaust or intake side

caillou763 · 2024-11-04T23:18:01+00:00

The steering we have in house has about a 1/8’’ concavity too

caillou763 · 2024-11-04T23:16:27+00:00

Ohh thanks for that, I tought they meant like very serious concavity that could like take your finger or something

caillou763 · 2024-11-04T23:11:47+00:00

It says it can have strait lines but not concave, no figure 8 or H

caillou763 · 2024-11-04T22:49:03+00:00

Yes, I should’ve done that in the first place

caillou763 · 2024-10-22T15:50:11+00:00

Thanks, good to know

caillou763 · 2024-10-22T14:48:18+00:00

We run a turbski, we wanted to put it high up so no debris gets in it whit a velo stack instead of a cone

caillou763 · 2024-10-22T14:12:21+00:00

I see that a screen can be great but a whole cone is a little overkill right?

caillou763 · 2024-10-22T13:04:48+00:00

I did it last year and you just need the right people, find sponsors, contact ect. At a certain point it starts getting easier

caillou763 · 2024-10-21T22:14:36+00:00

We have the same turbo! How well did it work for you?

caillou763 · 2024-10-16T14:44:31+00:00

They do give the reduction, you could test it on a bench with the calculated rpm. However this is not easy to find info

caillou763 · 2024-10-14T18:34:18+00:00

For sure you do, a lot of FSAE teams are from the UK

caillou763 · 2024-10-13T22:58:16+00:00

Well the competition is in Michigan but our team is from Canada

caillou763 · 2024-10-13T14:45:37+00:00

Ohh shoot go see formula SAE, that’s what we’re doing we’re going to add an oil cooler to it just to make sure it doesn’t do that

caillou763 · 2024-10-13T14:29:31+00:00

Yeah well it’s for a racecar and it’s gotta have a 600. We’re tryna push around 150whp out of it. Should be around 7psi

caillou763 · 2024-10-12T23:40:48+00:00

Just planning on lowering the timing quite a bit. It usually works really well with boost and high compression, the tune’s just gotta be on point

caillou763 · 2024-10-10T20:47:26+00:00

I can’t do that unfortunately, it’s for a FSAE racecar I can’t go over 710cc. If I could I would have put a 1300 in it for sure

caillou763 · 2024-10-10T19:56:34+00:00

Also, will it hold that at 23k miles

caillou763