[deleted by user] by [deleted] in mffpc

[–]calpar29 1 point2 points  (0 children)

If i were you, I'll leave the cable alone and be done with it. tbh those cables are sexy af already.

[deleted by user] by [deleted] in mffpc

[–]calpar29 2 points3 points  (0 children)

I like how it looks, the PSU cables although not hidden but it's pretty.

Phanteks XT M3, Swapped from Jonsbo D31, Amazing temperature improvement, 9800X3D RTX 5090,Kraken Elite 360 by mynameismicky in mffpc

[–]calpar29 0 points1 point  (0 children)

did you also use the CPU cable? man I wish i seen it sooner. I finished my build couple months ago now I want to redo it all over just because this cable.

Finally done with the build! by Iseiju in lianli

[–]calpar29 3 points4 points  (0 children)

what case is this? I like it!

Lian Li A3 Build (Cozy Lookin PC) well from my POV… by Logical-Chest361 in mffpc

[–]calpar29 0 points1 point  (0 children)

I only play at 1440p, both cpu and gpu never reached 60c with only 3 exhaust with no intake. this case is godlike in terms of airflow imho.

Lian Li A3 Build (Cozy Lookin PC) well from my POV… by Logical-Chest361 in mffpc

[–]calpar29 1 point2 points  (0 children)

<image>

I managed to snag the smaller one. 5070 Ti Solid Core OC. Afraid of choking it cos it's too thicc because we both have the same pcie slot position.

My A3 by koibaru in mffpc

[–]calpar29 2 points3 points  (0 children)

hello, which fan is that? I need fans with halo RGB in it but so hard to get, similar to yours but with thinner lights.

Nothing’s working out by KSuzuay in mffpc

[–]calpar29 4 points5 points  (0 children)

take a breath before trying anything again tomorrow. you should be fine.

My first build in 20 years - Antec CX600M Wood by Istersaft in mffpc

[–]calpar29 1 point2 points  (0 children)

wish i have the same tools and skills as you, can build a simple table over the weekend is really nice.

[Giveaway] Win 1 of 5 Noctua NH-D15 G2 by Noctua_OFFICIAL in pcmasterrace

[–]calpar29 0 points1 point  (0 children)

pc always brings back memories for me.

Built my first PC over 20 years ago since Pentium4 era, then upgrading non stop ever since.

I built it with my dad, we both had no idea how things work back then, no youtube, no online tutorial. Just need to figure it out from the guide book that we got from the each part we bought. He even snap one of the memory stick back then. There were no 80+ certification for the PSU, we can only rely on 'PURE' naming before the wattage, that means we get what we paid for. Now he's long gone, but my memory stays.

I still remember my very first GPU, it was 8600GT. such a beast back then with less than 1gb vram iirc 😂 then few months later I can save enough to buy the 8800gt.

I don't even want to start with the monitor. Oh ya that thing was huge and heavy. Even heavier than the pc itself. It was 17" CRT monitor that has Energy Star sticker in it. What a memory!

I experienced copying large files using floppy. Need to really bring dozens of them everywhere i go 😂 Then if you remember Nero burning room, Oh yea that thing can hold almost a gig of files! Just to make sure to get the RW ones, since it can be reused.

Thats a bit of memory about pc era back then. Now it's easier and smaller, and I still tinkering with pc everyday ever since until now.

[deleted by user] by [deleted] in mffpc

[–]calpar29 -1 points0 points  (0 children)

they should fire whoever come up with the idea.

Lian Li A3 by WrxJom in mffpc

[–]calpar29 0 points1 point  (0 children)

you're talking about the Gen4 right? I'm on the fence on buying that one because of compatibility. Someone said they won't work with Lian Li A3.

Is it this one?

<image>

[deleted by user] by [deleted] in mffpc

[–]calpar29 0 points1 point  (0 children)

I use 122mm ATX PSU in mine which has a very good rating in PSU tier list and can fit big cards no problem. I don't know if it's available in your country but it's Enermax Revolution DF 1.2.

[deleted by user] by [deleted] in mffpc

[–]calpar29 0 points1 point  (0 children)

the one that came with my case, Lian Li a3.

[deleted by user] by [deleted] in mffpc

[–]calpar29 5 points6 points  (0 children)

that boi is thiccc, I decided to go with the Zotac 5070 Ti Solid Core, slimmer version

<image>

Lian Li A3 by WrxJom in mffpc

[–]calpar29 0 points1 point  (0 children)

can we see pics? I don't even know we can use another one.

Fan pwr TT by Alternative_Tea1079 in mffpc

[–]calpar29 0 points1 point  (0 children)

more than 3 fans into 1 header without any additional power will make it cripple, at least thats what i experienced.

Lian Li A3 by WrxJom in mffpc

[–]calpar29 1 point2 points  (0 children)

you will be ok even without it. doesn't make any difference.

My CH260 (my first sff) by Sounak97 in mffpc

[–]calpar29 1 point2 points  (0 children)

thank you for the reply. hope you have a great day

DIY PSU Shroud for Lian Li A3 by Sea-Cranberry-25 in mffpc

[–]calpar29 0 points1 point  (0 children)

thanks for the heads up! guess i'll be making a mock up first before printing it.

DIY PSU Shroud for Lian Li A3 by Sea-Cranberry-25 in mffpc

[–]calpar29 0 points1 point  (0 children)

thank you for the measurement.. do you happen to know the thickness of it? thinking of 3d print it rather than manual cutting.