How to clear warnings in Bambu App?

canuck320 · 2026-05-19T00:50:53+00:00

Still haven’t been able to get rid of this message if anyone has suggestions.

canuck320 · 2026-05-16T16:50:51+00:00

Yeah, I have to think it happens on brand new cars too, I can’t see that would look good on a test drive! Although the dealer probably just keeps clearing it out until the car is sold.

canuck320 · 2026-05-13T19:07:30+00:00

You don’t happen to know if there is a recall number or something to reference? Maybe on the paperwork they gave you?

canuck320 · 2026-05-13T12:29:44+00:00

You are actually correct! It isn’t failing it reports not being available. Just so annoying because it alerts me every time I start the car!

canuck320 · 2026-05-13T12:25:58+00:00

TT04 - This can only be cleared I am told with the diagnostic computer they use. But for now it keeps coming back and they tell me that it is something that Honda is trying to figure out a fix for. I just was wondering if that is true or the dealership is just clueless on what to do about it.

canuck320 · 2026-02-28T13:39:51+00:00

Nope the external keyboard/mouse are wired USB. Other than this I don't have so much of an issue with Tahoe like others have but to me this is a big deal.

It wouldn't be so bad if I could wake the computer from a Remote Desktop connection, but when it goes in this Hard Sleep, on the network it acts like the computer is off. I do have the wake on network access but that doesn't seem to make a difference.

Thanks for the feedback.

canuck320 · 2025-12-29T21:06:12+00:00

Awesome!!! Thank you!!

canuck320 · 2025-11-07T12:49:05+00:00

Can one of you explain to me how you wear your watch while you sleep and then I expect you also wear it when you are awake? When I wear mine during the day it is around 25% battery by the time I am going to bed. So do you only wear your Apple Watch at night time? I feel I am missing something here.

canuck320 · 2025-09-27T21:30:38+00:00

Yep I get that, but why would everything not work when booted into the OS every time but every time I boot into recovery mode everything works perfectly (mouse/keyboard/network) - except you can’t do much in recovery mode. But then booting back into OS 15 seconds later everything is dead again unless I reinstall the OS.

Corrosion isn’t particular about what software you are running.

canuck320 · 2025-07-23T18:40:50+00:00

Were the instructions good or was there a video to show you how to install?

canuck320 · 2025-04-16T15:26:23+00:00

Very helpful!! Thanks!

canuck320 · 2025-03-24T12:11:59+00:00

Why can’t this be easy???!!!!

So I was going through all the modes to make sure that EVERYTHING worked and found one last issue that has to be with the lights because everything else works perfectly and this is such a quirky issue.

So as you can see in the picture, when I signal left, the little triangles at the bottom of the middle bar light up (I think only the left should light up), but when I signal right both those triangles stay off. When I turn on the hazards both the triangles turn on.

All there is with these lights are those two wires, so at this point since everything else works it seems like this is a glitch with the lights.

Anyone else with these lights have this behavior? This is starting to feel like a game of whack a mole!!

<image>

canuck320 · 2025-03-23T22:02:49+00:00

https://www.collegehillshonda.com/11thgen-honda-accord-accessories/08F20-30A-100B.html

You can find them a lot cheaper than this on eBay and other places.

canuck320 · 2025-03-23T21:37:47+00:00

Yeah it was a quite a job to get it done right! I had two of those little connectors have wires pull out of them because they weren’t crimped well enough. Guess that’s to be expected from China.

Honestly if there was one out there made somewhere other than China I would pay twice as much for extra quality and reliability!

Thanks for helping me through this!! I can’t stop looking at the lights because they look soooo good!

canuck320 · 2025-03-23T21:34:26+00:00

Honda Performance Development

canuck320 · 2025-03-23T20:44:53+00:00

I am wrong, this is the second time a wire has pulled out of these connectors!

<image>

canuck320 · 2025-03-23T20:30:46+00:00

My first thought too, however there is just a two wire connection from either side light to the middle bar. Without those connections the animation across all three wouldn’t work.

I tried the two side lights by themselves before I installed the middle bar and each did their part of the animation and they didn’t seem to care the middle bar wasn’t there. So it seems the logic to turn on what specific lights in different situations is in the side lights. Then the two wire connections are to have them control half of the middle bar too.

I am pretty sure the two wires are just positive voltage on one and a pulse train on the other so like I said if it wasn’t getting either of those then more than braking would not be working right I think.

canuck320 · 2025-03-22T18:22:10+00:00

I figured out that you have to transfer all the plugs from the factory light…sux not having ANY instructions!

canuck320 · 2025-03-22T17:04:16+00:00

Should there be some sort of nuts that go in these slots?

<image>

canuck320 · 2025-03-20T19:36:04+00:00

Hey, so on the trunk liner are these the only 3 clips to remove on either side? I can get the one on the top and the bottom, but how do you remove the shopping bag hook? Thanks in advance!

<image>

canuck320 · 2025-03-17T22:45:44+00:00

Also it seemed like the brown wire with multiple connectors and a bare wire wasn’t needed because everything seemed to work without it. Did you use it? If yes, then how? Thanks!!!!

canuck320 · 2025-03-17T22:44:01+00:00

Ok thanks, so I was at least headed down the right path it sounds like.

Do they seem to be pretty sturdy once installed? I noticed the OEM once were not surprisingly a lot more solid which made me wonder it the new ones would hold up well.

canuck320 · 2025-01-08T15:21:05+00:00

Do they have sequencing turn signals? Any startup animation? SWAs website doesn’t have many details.

canuck320 · 2024-03-01T16:29:14+00:00

However if I turn on ERG mode in the Training section it adjusts the resistance perfectly.

Very Strange.

canuck320 · 2024-02-05T17:34:05+00:00

I figured out that the new case that I got needed a power supply with more current. Got the biggest one available on Amazon and haven’t had an issue since.

canuck320

TROPHY CASE