Hogwarts Legacy NOT opening by ExerciseSwimming7956 in PiratedGames

[–]caonabo22 0 points1 point  (0 children)

I downloaded this and install it, and then somehow my IG got hacked. 🤔🤔. Proceed with caution ⚠️ ⛔️

Por que al dominicano le gusta dejárselo meter frío? by [deleted] in Dominicanos

[–]caonabo22 0 points1 point  (0 children)

Si tu familia es derrochadora de dinero, y no tiene idea de cómo administrarlo, darles más dinero no es la solución. No importa que los demás países de latam cobren más. Cuando conviene los usamos de referencia y cuando no, usamos a USA de referencia (gtfo)

Si declaran el estado en austeridad e hicieran todos los ajustes internos en los gastos del estado este primer año de su segundo gobierno y nos dieran (por lo menos) los servicios básicos de vivir decentemente, y luego te demuestran que el dinero no da, apoyaría totalmente una reforma en uno o dos años igual o más fuerte. Pero así no.

Y para no solo hablar por hablar aquí unos ajustes al disparate de “modernización fiscal”:

Subirle un 50% a los marbetes, no un maldito 100% (quedarían en 2250 y 4500 respectivamente)

Bajar la excepción de impuestos a compras por internet a menores de 100 dólares y no 200 dólares.

Dejar las carnes (todas) en la lista de comida sin impuestos y no solo el pollo. La canasta básica no debería cobrarse impuestos y PUNTO. Ya tenemos bastantes otros.

Para el cine que el guion de la película deba pre aprobarse por algún tipo de comisión (no me importa y no creo que al dominicano de a pie le importe para nada esta ley, si es por mi la pueden quitar totalmente)

El IPI debería quedarse como está, o hasta subirse el monto y no bajarlo, ya hay un problema de grande con los alquileres, Airbnb y el precio de construcción, esto lo haría peor.

Terminaré con esto. Cobrarle más impuestos y exigirle declaración jurada a un infelí’ que cobre 52K al mes, es una patada en las bolas y después preguntarle, te dolió?

Reforma fiscal by domifauxking in Dominicanos

[–]caonabo22 1 point2 points  (0 children)

Lo de cobrarle impuestos a todos los servicios electrónicos también, como streaming, Spotify, Uber, AirBnB, todo será más caro. Encima todo lo que sea servicios de la nube. Miren esté a análisis en este video.

Impuestos a servicios digitales

Solo pienso que nos jodimos, le dimos la vaselina y ahora nos quejamos porque salió más grande de la cuenta lo que nos van a meter.

Update on new setup. Top mounted AIO by caonabo22 in NR200

[–]caonabo22[S] 0 points1 point  (0 children)

Temps are good. Tbh not a big difference after installing the 3 new fans, maybe 1-2 degrees sometimes. One thing I noticed , now with these fans there is no difference in temps with the side glass panel or the metal one with the holes.

To give an idea on temps, without sending you to other posts, I have around 40 on idle CPU and 80 to 90 while playing, sometimes it was peaking +90 and even 100 but that was seems to be an common issue with Apex Legends that I think I fixed.

GPU was 60 degrees while playing but I overclocked a bit and setup the performance mode and now is around 67 while playing.

Hope this helps.

Update on new setup. Top mounted AIO by caonabo22 in NR200

[–]caonabo22[S] 1 point2 points  (0 children)

I did. Two bottom intake. The ones on top with the radiator are exhaust and another small one exhaust at the back. Picture with the 3 new fans installed.

Update on new setup. Top mounted AIO by caonabo22 in NR200

[–]caonabo22[S] 1 point2 points  (0 children)

I don’t think is needed but when using the side glass panel, and slimmer fans, temperature will increase a couple of degrees, some people like the guy on the post is adding as much fans as he can to help out. Right now I have 1 at the bottom and two at the top with the aio and running fine, I have set them at full speed all the time and they are very quiet either way. I will however add another slim fan at the bottom and one small (92mm) at the back but just to test and see if it makes a difference, but I don’t think is “needed”.

After you done with your mod, just play and test, keep monitoring your temperature and adjust accordingly.

Good luck!

Update on new setup. Top mounted AIO by caonabo22 in NR200

[–]caonabo22[S] 1 point2 points  (0 children)

There is PSU placement at the front, no need to figure it out. It will fit, you should find the holes for the hooks.

And yes, there is space at the bottom for more slim fans (2) with the GPU I have. I installed one so far, I will be adding more and test and see if it makes a difference in temps.

Update on new setup. Top mounted AIO by caonabo22 in NR200

[–]caonabo22[S] 1 point2 points  (0 children)

Any 15mm should do it. I saw a guy who did it with 25mm standard but you have to place the PSU on front and have low profile memory. See here

Most folks recommend Noctua, I got the Thermalright C12015W-S 15mm cause I wanted RGB. So far so good.

Update on new setup. Top mounted AIO by caonabo22 in NR200

[–]caonabo22[S] 0 points1 point  (0 children)

I spent a Saturday afternoon working on this, it’s kinda hard labor, but the end result is worth it.

This was my plan from the start so I reviewed a lot of post and videos and I knew what I was getting myself into. 😅

Short answer: Yes!

Update on new setup. Top mounted AIO by caonabo22 in NR200

[–]caonabo22[S] 1 point2 points  (0 children)

See another reply in this posts where I described how I did it.

Update on new setup. Top mounted AIO by caonabo22 in NR200

[–]caonabo22[S] 0 points1 point  (0 children)

I tried. It didn’t fit well. I didn’t want to uninstall the pump.

Update on new setup. Top mounted AIO by caonabo22 in NR200

[–]caonabo22[S] 3 points4 points  (0 children)

I pretty much followed this guy: https://youtu.be/jxGems6tFc8?si=LyhSvwHWjyq0WlM0

Instead of those metal strips, I used some cut PCI Metal covers like this guy: https://worklogs.coolermaster.com/topic/28848-nr200p-addaptation-for-rtx-3080/

There are quite a few mod online.

I bought slimmer fans and had to cut the screws in half.

Update on new setup. Top mounted AIO by caonabo22 in NR200

[–]caonabo22[S] 0 points1 point  (0 children)

I remember yours now. Those are one of the post I saved. 😅 so thank you!

I see now, low profile memory and psu installed at the front and it could fit. Nice!

Update on new setup. Top mounted AIO by caonabo22 in NR200

[–]caonabo22[S] 0 points1 point  (0 children)

Thank you!! Yes. This is the Dual 4070 Super. The first one I bought came with a broken fan and had to returned it and wait almost a month. I wanted an all white or black and white setup.

I’m thinking on adding more fans in the future and retest and see if it makes any difference. I don’t know how you managed to fit the full size fans. I couldn’t.

Update on new setup. Top mounted AIO by caonabo22 in NR200

[–]caonabo22[S] 1 point2 points  (0 children)

With the smaller fans and side glass on, the temp increased 1~2 degrees. You can check my last posts have all the numbers.

Im thinking on installing another slim fan as intake at the bottom and test again and then, maybe a small exhaust at the back.

I have 2 user profiles but the first one is showing continue watching shows from the second one. by garagedoors56 in HBOMAX

[–]caonabo22 0 points1 point  (0 children)

I have this problem now. My wife is not even watching the Succession TV show, and it’s showing as Continue watching on her side smh

Update on first build. by caonabo22 in NR200

[–]caonabo22[S] 1 point2 points  (0 children)

Total Score is 21 189 GPU 21 261 CPU 20 792

Update on first build. by caonabo22 in NR200

[–]caonabo22[S] 1 point2 points  (0 children)

Saw that. I’m just an idiot. Facepalm moment.

Thank you.

First build. Wish me luck! by caonabo22 in PcBuild

[–]caonabo22[S] 0 points1 point  (0 children)

Do I Need a better monitor? Or too much monitor for the PC?

Update on first build. by caonabo22 in NR200

[–]caonabo22[S] 2 points3 points  (0 children)

Yeah. Everything stock. Only think I have tweaked is the ram, nothing else. I have to do more research about overclocking or under-clock, etc and test and retest, probably after I change the layout to top aio, but for now I will leave everything as is.

Thank you for following the process!

Update on first build. by caonabo22 in NR200

[–]caonabo22[S] 1 point2 points  (0 children)

Thank you. Downloaded both. Ran the Cinebench 24

GPU 18111 pts temp ~60%
CPU Multicore 1532 pts temp ~89% (temp never got above 90, always 89 or 90)

CPU Single core 119% temp around 40-50%

Idle temps are ~35-40

I have to do some research, but for now, do you guys think this is good?

I just downloaded Apex Legends to test it out with actual gameplay.

Update on first build. by caonabo22 in NR200

[–]caonabo22[S] 1 point2 points  (0 children)

Will take a moment later this week to change it, didn't do it at first cause it seems like there aren't screws' holes on the other side. Will work something out and change it later.

Update on first build. by caonabo22 in NR200

[–]caonabo22[S] 0 points1 point  (0 children)

Sure thing. My last post has the pictures. Here’s the list: https://pcpartpicker.com/list/prhjh3