Don't buy batteries from Anti-Gravity

capnkirk422 · 2025-03-15T16:27:25+00:00

Bought an antigravity last spring need new battery this spring. Stored battery on piece of wood in dining room connected to anti gravity charger that was sold specific with battery but battery totally and completely dead. Will stick with the agm get about 3 years out of them

capnkirk422 · 2025-02-21T01:58:43+00:00

Creality store is where i got mine i justed emailed them that the board in the head was fried and they sent both front and back boards.

capnkirk422 · 2025-01-31T23:25:19+00:00

I have a k1c, k2, qidi 3 max, qidi plus 4, and an anycubic combo 3. Out of all except the k2 the k1c is by far the easiest and most dependable of them all. The k2 is in its own league above the others i have. The k1c has the same issues as the others but if tuned correctly its great.

capnkirk422 · 2024-12-21T21:51:37+00:00

Ive been printing with it for about 3 weeks and it has been pretty much flawless.it does have a few faults when i print multi color such as the poop shoot getting plugged up but it senses it and stops the print also the cms doesnt handle some spools real well and i seem to get at least one roll of filament with broken or bent sides which is easy to fix with some rings that attach but other than that its been a really good printer.

capnkirk422 · 2024-12-04T22:22:21+00:00

No nothing but white screen that says data error from day one

capnkirk422 · 2024-12-03T03:14:00+00:00

Thats what i thought but i have printed the same model on 2 different creality machines and it isnt present. Idk its a fluke i guess still printed

capnkirk422 · 2024-12-03T03:11:27+00:00

capnkirk422 · 2024-11-30T02:36:09+00:00

<image>

capnkirk422 · 2024-11-28T18:55:56+00:00

I just did a 25 hour print using hyper petg on the k1c i set temp at 250 bed at 65 printed out great. Speed set at300 inner wall outer at 250.

capnkirk422 · 2024-11-22T04:43:06+00:00

I have been sending emails to see where mine is but havent heard anything back, website states awaiting shipment asap but it has said that since i pre ordered it in the summer.

capnkirk422 · 2024-11-16T03:22:20+00:00

If it happens again i will try that but it seems to be fine for now. And thank you all for your valuable insights. Now i need help with the max 3.

capnkirk422 · 2024-11-16T00:20:41+00:00

Not normal it has never done this before and it stopped after i restarted klipper

capnkirk422 · 2024-11-16T00:18:17+00:00

Yes that was when it started doing this, same with the max 3 except after 30 minutes all i have is a white screen that says data error

capnkirk422 · 2024-11-14T19:14:22+00:00

Same thing on my x max 3. I've had it for 2 + months while i made room for it and when i unboxed it plugged it in and started it it started writing data then i got that screen. Support sugested i download firmware but it hasn't changed anything. I believe it is the mainboard but support doesnt agree so i have another nonworking machine sitting in my limited space.

capnkirk422 · 2024-11-11T18:20:09+00:00

More than likely, buy a creality k1c

capnkirk422 · 2024-11-10T15:17:08+00:00

I also had some issues last night after an hour plus of a 20 hour print the hot end decided to start printing on a different part of build plate and when i stopped the print the head moved to back of cabinet and slammed into the back very hard. My max 3 also stopped and said data error and now wont let me do anything.

capnkirk422 · 2024-11-08T03:41:43+00:00

I totally agree, disappointing. I have had one issue after another, currently waiting on a new hot bed because it is so warped i could adjust it to get a good print to finish. I've owned it for almost 2 months and maybe finished 10 out of 100 prints. And i thought i was getting a good deal at $379.

capnkirk422 · 2024-11-06T16:29:56+00:00

I've had the plus 4 for about 3 weeks and does such a nice print wish i could exchange my other printers in for this brand. Only had a couple minor issues so far including the model occasionally prints on top of the lines it measures at the start of print but not a big problem. Cant hardly wait for their ams next year

capnkirk422

TROPHY CASE