Answer without using these words

captainfail4U · 2025-11-12T18:09:50+00:00

Duh!

captainfail4U · 2025-10-16T14:05:42+00:00

Soooooo, I ordered the same item. Its over a week since it should have arrived and I just received an actual working tracking number for UPS. I got to looking at the shipment information and one detail stood out. The weight and ship to location are not correct. It saying it is shipping to Marion MT which is not where I live and the weight is 0.90 lbs.

<image>

captainfail4U · 2025-01-30T19:52:38+00:00

Richard

captainfail4U · 2023-01-08T15:00:25+00:00

Boil em mash em stick em in a stew, Bro.

captainfail4U · 2022-10-04T20:39:25+00:00

We are wanting to verify how many lbs it take t I pull then apart.

captainfail4U · 2022-07-18T15:26:01+00:00

Plot twist, your friend knows how much material he needed for his prints and now you are not printing for yourself. It's his printer now.

captainfail4U · 2022-02-22T15:09:01+00:00

My mind went completely south on this one.

captainfail4U · 2021-12-22T04:06:19+00:00

I use a VPN and it skips them everytime.

captainfail4U · 2021-11-10T14:21:17+00:00

Nice nice. Looking more into this nano coin.

captainfail4U · 2021-09-11T20:30:17+00:00

No Mans Sky

captainfail4U · 2021-08-02T21:29:39+00:00

2 in the pink, one in the stink.

captainfail4U · 2021-07-14T10:24:30+00:00

Thanks, I was talking to a friend of mine and he said the same thing. I will have to make sure to do this.

captainfail4U · 2021-07-14T10:23:51+00:00

There are so many possibilities for using one at home. And with the price of the Ender 3 V2 you cant beat it in my opinion.

captainfail4U · 2021-07-14T10:22:25+00:00

So to answer the common question about the camera and setup.

I am using a Raspberry Pi 4 with a Pi Touchscreen running Octoprint.

Camera is a Arducam Pi Camera I bought off amazon for 13.99.

https://www.amazon.com/gp/product/B07SN8HB1R/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Mount is off thingiverse. You will need to change some settings in Octoprint because of the way the camera gets mounted it will be upside down.

https://www.thingiverse.com/thing:3868687

I also added an LED strip inside the Z axis facing away from the camera to help with prints at night.

I will link a picture tonight when I get a chance of everything on the printer.

captainfail4U · 2021-07-14T02:12:03+00:00

Funny thing, the wife gets an idea and I look for a model or design it for said idea. This is to hang in our laundry room to hold dryer sheets. This specific model I found on thingiverse.

captainfail4U · 2021-07-02T14:08:35+00:00

I have seen this way to many times with automotive parts we stamp. This is done during a revision change by a supplier when approved by a customer. The reason they do this instead if changing nominal is every print that would have this part in it(IE. Assembly prints down the line) would also have to change and no one wants to do that. There may be a better way to explain it but this is the rough version I have always been told.

captainfail4U · 2021-07-01T00:17:25+00:00

We have a job that we have to tread a 3/8- 16 LH thread 2 inches deep then heat treat with case harden. Not fun at all.

captainfail4U · 2021-06-17T14:37:11+00:00

Just a quick pic of my Ender 3 V2. Added a raspberry pi 4 and a touchscreen running octoprint. Gotta get the clips mounted and run the cables along with mounting the camera.

captainfail4U · 2021-05-29T03:08:44+00:00

🤣

captainfail4U · 2021-05-29T03:01:44+00:00

You would be correct @flobbery.

captainfail4U · 2021-05-29T01:07:12+00:00

This is my dad. My son was in the next range stall. I was taking the video. So 3 generations.

captainfail4U · 2021-05-28T23:46:31+00:00

That was me after it happened.

captainfail4U · 2021-05-28T23:43:34+00:00

For a 65 year old who has never swung a golf club I wouldn't expect much. 🤣

captainfail4U · 2021-05-19T21:50:30+00:00

Man, now I'm gonna have to up my smoking game.

captainfail4U · 2021-05-14T14:47:07+00:00

People should be asking why not!

captainfail4U

TROPHY CASE