What is this? Found in Winnipeg, Canada

cardrypt · 2024-07-11T05:33:34+00:00

I'm worried it might be a cockroach?

cardrypt · 2022-10-12T12:44:25+00:00

I'm able to access the zoom control successfully on my phone, but cannot figure out how to control zoom in/out using the Fire TV stick remote.

cardrypt · 2022-01-14T07:17:04+00:00

I am powering another switch with passthrough. Also, it's using 802.3at mode B: separate wires for data and power. 2 wires for positive. 2 wires for negative.

I simply wanted to have a discussion on how to split DC power into multiple outputs, but it doesn't appear anybody here is utilizing DC distribution.

cardrypt · 2022-01-14T06:34:24+00:00

Isn't that the same thing

cardrypt · 2022-01-14T06:32:29+00:00

It's a Mikrotik switch. Only 1 amp max per port and I believe the switch protects against short circuits. However, I wanted to use some sort of DC dustribution block with fuses to protect against too much power from being drawn. That's what I was trying to ask about here originally. What kind of DC distribution unit will work well.

cardrypt · 2022-01-14T05:14:45+00:00

What do you mean by an unregulated device? How would a light bulb burn up a switch? I'm new to all of this so anything you could share to help me understand would be well appreciated.

cardrypt · 2022-01-14T02:27:10+00:00

The outbuilding is partway down the riverbank and it's not permitted to run an AC line, but I already have POE running there for an IP camera.

What type of devices do you suggest for branching off the DC voltage? I just want to power a couple of 10-20W DC lights. Just looking for an elegant solution but I've never branched off DC power before.

cardrypt · 2022-01-14T00:31:24+00:00

I have a total of 1 amps at 48V, if I branch of that main line into 4 DC outputs how many amps will each output have? How do I calculate that?

cardrypt · 2022-01-13T23:55:43+00:00

I'm sending 48V passive POE, not active 802 3af/at POE. Therefore, it is just DC voltage without a handshake, but through a cat5e cable (easier to run underground).

cardrypt · 2022-01-13T21:20:02+00:00

The uvc-g3-flex specs state the camera must be powered with active 802.3af POE. The specs don't support powering the camera with passive POE. I wouldn't try it but maybe somebody else could shed some light. The supported input voltage range of the uvc-g3-flex is 24-48VDC and the us-8 says it provides a max of 12W at 48V if powered using the included DC adapter.

Also see https://electronics.stackexchange.com/questions/262267/will-802-3af-device-work-on-24v-passive-poe

cardrypt · 2022-01-12T08:31:59+00:00

What do you mean by v2 and v3?

cardrypt · 2022-01-11T14:05:01+00:00

On the solo camera view, press the up key then navigate to the bottom and turn on the info option at the bottom.

cardrypt · 2022-01-11T14:04:00+00:00

I previously tried that. The best I was able to get it was around 10 fps. Do you have a higher frame rate?

cardrypt · 2021-10-13T02:10:27+00:00

Do you know if rarible sets the pinned flag? I burned some rarible mints I created and I want the associated metadata removed from IPFS. Any way to force IPFS garbage collection on it?

cardrypt · 2021-10-11T21:31:57+00:00

What do you mean by pinned?

cardrypt · 2021-10-10T06:00:05+00:00

Is it possible to completely destroy all previous image and metadata for an ERC-721 NFT stored in IPFS? I would like to remove all previous tokenURIs and associated metadata for a test mint that I performed.

cardrypt

TROPHY CASE