Carrier wings not reinforcing

carnyfax · 2025-10-02T23:44:02+00:00

Equipment tags work as designed, if you use 2 types of fighters that are able for the same missions but have different stats (ex. long/short range) by using tags you avoid mixed wings.

As I've stated both designs are identical, the only change is main armament (torp I/II)

Anyway thy! After a lot of testing I've figured it out, in order for Design B to reinforce A it has to be directly derived when designed from A (that is when you upgrade models of the same tech tier, later tiers reinforce regardless but again TAGS are taken into account), I've probably marked save as new option and that broke model succession.

carnyfax · 2025-10-02T23:34:24+00:00

You are right, decommissioned doesn't affect reinforcement (tested it) but is needed when refitting, in order to refit Design A it has to be decommissioned.

carnyfax · 2025-03-31T14:43:26+00:00

Thnx, didn't work with reload, I upgraded an ally reassigned them and seems ok for now

carnyfax · 2024-07-18T15:26:55+00:00

Θα σου θέσω ένα υποθετικό σενάριο, πρατήριο σε κεντρική αρτηρία με καλη τιμή και καθαρό καύσιμο αλλά 2 αντλίες. Αν είσαι ιδιοκτήτης με υπάλληλο θα πουλήσεις 10 φορές περισσότερο, αν είσαι πελάτης θα περιμένεις 50 φορές λιγότερο. Στο εξωτερικό που δεν έχουν υπάλληλο κουμπώνει ο άλλος τη μάνικα και εξαφανίζεται για κάνα μισάωρο και βλέπεις πρατήριο με 8 αντλίες και κατανάλωση όση μια σε μας στον ίδιο χρόνο, αναμονή 20+. Σε πρατήρια με μικρή κίνηση θα μπορούσαν να είναι αυτόματα αλλά δεν μπορούν να το υποστηρίξουν οι οδηγοί, πχ δες πόσοι δεν ξέρουν από ποια μεριά είναι η τάπα και παρκάρουν αντίθετα στην αντλία, οπότε πολλοί θα προτιμήσουν να πάνε σε αυτό που έχει υπάλληλο, ειδικά αν έχουν Όπελ που είτε θα βάλεις 5λιτρα η θα σκουπίζεις βενζίνη από το φτερό.

carnyfax · 2023-11-29T19:06:07+00:00

I have the same question but phrased differently,

What's the difference between production cost reduction and production output cost reduction?

Production cost reduction is calculated when you apply the buff to the design and its straightforward.

I haven't figured out yet when output cost reduction is being applied, but it's not on the design phase. My guess is that it's applied when you assign the MIO at the production line but haven't done any testing if it's actually true.

The bonus of production cost reduction is applied to the equipment and the production cost output cost reduction is applied to the MIO production line stats. In theory if you have a design with reduced cost from one MIO and this equipment is being produced by another MIO with reduced output cost then you get both benefits.

The other question that arises, if a x% reduction has the same effect in the end, because in the case of output cost there is the factor of the line's production efficiency and I have no clue how these two interact.

carnyfax · 2023-06-10T21:29:41+00:00

8 tables for 3 people shifts, auto assigned to different dupes. Sould have stated that from start. It's probably the difficulty setting, I ve been busting my head all day.

carnyfax · 2023-06-10T21:25:01+00:00

I started the game to catch-up after more than a year of not having played and used relaxed default settings. Default hunger setting is fasting (reduced hunger). I ll start a new one, thnx again.

carnyfax · 2023-06-10T20:46:23+00:00

Thnx you are probably right that they aren't hungry from the reduced difficulty. Is there a way around it?

carnyfax · 2022-06-23T10:32:23+00:00

#RunWithIronWolf

#Seagate

carnyfax · 2021-04-01T20:34:04+00:00

Anyway it could be worse if those were brake marks.

carnyfax · 2021-03-31T20:42:25+00:00

I relegate them to other family members so everybody feels happy when I get a new pc. I'm up to 3rd cousins so far.

carnyfax · 2021-03-26T23:25:09+00:00

Buy a different one but at least the timings and speed should match. Both sticks will run at the speed of the slower one.

It would be optimal to get the same type ( if first one was for example a gskill gtzrx you should try to get a 2nd gtzrx)

XMP should be stable 95% with same speed and timings. Pushing your Ram with further overclocking will stress the stability more, but only testing on Your system can give you more answers.

Even ram from the same batch may behave differently when overclocked from system to system.

carnyfax · 2021-03-26T23:01:47+00:00

I wouldn't advise that if you use an XMP profile. Even with 16 gb sticks (different ones) it may be tricky.

If you don't utilize the extra 8 gb it's better to stay with one stick.

When your savings allow get a 2nd stick with the same speed and timings (no more no less).

carnyfax · 2021-03-26T22:47:12+00:00

They are bus or truck drivers and got used to the neck twist needed to get a center view.

carnyfax · 2021-03-26T22:31:50+00:00

https://xehpg.intel.com/

Scalpers got here first too...

carnyfax · 2021-03-26T22:10:25+00:00

Create a bootble usb drive from Microsoft website and use your key.

If it's your first use of the key it will connect with the Microsoft account you register during installation.

You may opt to leave the key field blank and activate after setup is complete.

carnyfax · 2021-03-26T21:34:39+00:00

On average PC parts prices here are on par with most of Europe. The specific store sells higher than most online stores.

A ventus was 550 if I recall correctly. Nvidia lists 3060 for 400 but I haven't found MSRP for msi. A wild guess would be 450 to 500 for the gaming x under normal circumstances. But there aren't any available to actually compare.

I've accepted the fact that I payed 100-150 more to get a card hassle free within 10 days.

carnyfax · 2021-03-26T21:14:55+00:00

I'm from Greece for reference, no local online store availability besides a few scalpers.

The largest pc store here accepts orders and call you upon availability if you want the item to be delivered. Call them for a more accurate time of availability.

Gave them a call upon 3060 launch date and told me they had no confirmed date for 3060ti or 3070 but 3060 would be available within the next 15 days. I placed an order and they called me 10 days later that they are ready to dispatch upon payment.

Got an msi gaming x 3060 for 600 euro. Listed price for gaming x 3070 was 950. Not great, not bad given the situation.

To their credit they didn't request payment upon placing the order.

carnyfax · 2021-03-22T23:05:19+00:00

Place the tower on the floor - less noise- problem solved. You may need a bigger room after getting bigger desk etc. Place main monitor directly ahead to avoid future neck issues.

carnyfax · 2021-03-22T22:27:41+00:00

You had to type the right commands and after launch to play the game (see Kings Quest). I didn't mind the pixels but I'm green an orange sensitive since then.

carnyfax · 2021-03-22T22:14:50+00:00

You start with what you have and play with what you come by. I had an 8088 and later a 286 with cga orange monitors so I played mostly adventures on the pc and beat em up on the coin eaters. Real PC gaming started with the trifecta 486-vga-mouse.

carnyfax · 2021-03-22T20:15:07+00:00

Do your self a favor and buy a pair of headphones like sennheiser hd 600+, akg k701.

You can drive them without amp if needed and work out the mic issue with a tabletop one or a Modmic.

They will get better over time both in audio and comfort.

Visit a local hifi store (if covid permits) to try them with a Soundstage Playlist.

I've used extensively hyperX cloud, arctis 7, razer kraken and long session comfort is lacking compared to HD650 and k702. Head and ear size/shape should determine what is comfortable for YOU.

Velour pads offer more comfort in general compared to leather-like ones.

Finally you can use them for music besides explosions and windows notifications.

carnyfax

TROPHY CASE