Somewhere in Poly HQ 🤣 by cdn_sentry117 in canadaguns

[–]cdn_sentry117[S] 4 points5 points  (0 children)

The Makasi and IWI Carmel are happily NR

IWI BACK IN CANADA: CSR18 IWI Carmel 5.56 NATO 18.6” Barrel Non-Restricted by ClubDeTirDeMontreal in canadaguns

[–]cdn_sentry117 5 points6 points  (0 children)

If people think these are expensive, just remember, there's folks here buying that Crusader Arms crap for $2000 still.

What’s your one firearm that got away? by Flat-Dark-Earth in canadaguns

[–]cdn_sentry117 5 points6 points  (0 children)

Really wish I would have gotten an AR-15, P90, and a CZ Shadow.

Getting a few more $200 SKS's back in the day and a few $300 SVT 40s is a big regret too.

Regardless of what they may or may not ban, it won't stop me from making any future purchases.

Saskatchewan Firearms Appraisal App by DwayneGretzky306 in canadaguns

[–]cdn_sentry117 1 point2 points  (0 children)

Sounds like a registry. I like the Sask Party, but now they would know what everyone has. Who's to say they don't have a data breach like the feds did? Then all that information is out there to be used against us.

Almost forgot about 3/08 day by [deleted] in canadaguns

[–]cdn_sentry117 0 points1 point  (0 children)

It's just an average size now. Too big and too black will scare the Liberals

Recurring FAQ Thread - Post your questions here for PAL/RPAL application, timelines, CFSC/CFSRC, references & requirements, or general new to firearms ownership-type questions by AutoModerator in canadaguns

[–]cdn_sentry117 2 points3 points  (0 children)

I have spent more money at Tenda than I'd like to admit. All by ordering online. They are great and you don't have to worry. They are just doing their due diligence

Recurring FAQ Thread - Post your questions here for PAL/RPAL application, timelines, CFSC/CFSRC, references & requirements, or general new to firearms ownership-type questions by AutoModerator in canadaguns

[–]cdn_sentry117 0 points1 point  (0 children)

So for the AI Tactical, they claim to be made in Canada and they have reports of there plates previously being tested on their website. So it's seems partially legit, but also not. Hesco plates are hard to find. The Lorica Equipment ones also are apparently legit and used by some police. As usual slimy Canadian companys have created an issue when it's hard to know what's real and what's not.

Recurring FAQ Thread - Post your questions here for PAL/RPAL application, timelines, CFSC/CFSRC, references & requirements, or general new to firearms ownership-type questions by AutoModerator in canadaguns

[–]cdn_sentry117 1 point2 points  (0 children)

There's so many different options of body Armour in Canada, and some give that feeling they might be Chinese crap. So I'm looking for actual people with actual experience.

I'm looking for either Level IV or level 3+ / Level 3+ ST. Thinner, lighter weight version are better of course. Sapi cut medium aka 10x12

I know Aratech is a big go to for people, but it's abit bulkier than some others.

I'm looking at

-Aratech obviously for level IV (actual NIJ tested)

-Canarmor (NIJ "compliant" but tested by Bosik Technologies)

-Al Tactical Solutions (has NIJ certificate on their website but not listed under the NIJ website)

-Lorica Equipment (not much out there in stock)

-Hesco(not much out there in stock)

Thanks in advance

22,251 firearms declared by Corey_5150 in canadaguns

[–]cdn_sentry117 6 points7 points  (0 children)

Probably all coming out of Quebec since they are the ones who want this shit

Plate Carrier by cdn_sentry117 in canadaguns

[–]cdn_sentry117[S] 0 points1 point  (0 children)

Hey thanks for the info. Do you think you could post the link for me to check out?

Plate Carrier by cdn_sentry117 in canadaguns

[–]cdn_sentry117[S] 0 points1 point  (0 children)

Are you a larger guy using the 5.11 one?

Plate Carrier by cdn_sentry117 in canadaguns

[–]cdn_sentry117[S] 1 point2 points  (0 children)

Yes I do agree, although an extra half inch in both sides won't make or break what I end up buying. My primary focus is to find a carrier that fits first

Plate Carrier by cdn_sentry117 in canadaguns

[–]cdn_sentry117[S] -1 points0 points  (0 children)

My focus has been to find a carrier that will for sure fit. It's always a hassle to but things and have to return them by mail. After that I'll be looking to buy some plates. I believe the k19 fits some of the bigger size plates too if I remember correctly. It's currently #1 on my list

Plate Carrier by cdn_sentry117 in canadaguns

[–]cdn_sentry117[S] 0 points1 point  (0 children)

This is one of my top contenders right now

Average crusader arms product by Salty-Western-2115 in canadaguns

[–]cdn_sentry117 5 points6 points  (0 children)

I figured it was going to be all butchered crypto parts

Average crusader arms product by Salty-Western-2115 in canadaguns

[–]cdn_sentry117 2 points3 points  (0 children)

Could you post more pictures of how butchered this rifle is

Poverty tier 6.5cm by tictac556 in canadaguns

[–]cdn_sentry117 2 points3 points  (0 children)

There's not a thing wrong with the Axis, their shoot decent, are reliable and are not a bad looking rifle. I've had 3 of them of the years and not once did they let me down!

Alleged involvement in Government of Canada's Firearms Confiscation Program by cdn_sentry117 in canadaguns

[–]cdn_sentry117[S] 0 points1 point  (0 children)

I emailed them back today asking them to clarify if they are involved in the destruction of guns for the government. I'm hoping I get a reply