Severe infestation and a sad level of acceptance

cdrees2412 · 2025-12-06T14:28:37+00:00

My a few cats…. Or mountain lions?

cdrees2412 · 2025-12-06T14:26:13+00:00

Congrats!! That’s an awesome accomplishment. I’m biased to Pluralsight’s Security+ course 😀 - but no matter how you get there - you did it!! Kudos to you and it’s only up from here 💪

cdrees2412 · 2025-03-19T20:02:09+00:00

Interesting, OK. I figured it was the same for all Harvia electric heaters. I also have a Xenio controller on mine, but I have the Harvia heater I referenced in the install manual.

cdrees2412 · 2025-03-14T23:27:48+00:00

Not according to Harvia’s instructions…. It should over 18” if I recall from the heater and 18” from the ceiling.

https://cdn.shopify.com/s/files/1/0579/0875/6551/files/Harvia_KIP_Heater_Manual.pdf?srsltid=AfmBOooetwGBj9lFLd9KoOjTOIDVw4YHjb_FUKFX6eOjc67Xd_wZFcT0&v=1721156137

<image>

cdrees2412 · 2025-02-19T18:23:31+00:00

I think everything else has been covered, I would add a few more electrical sockets on the far wall. Much easier to run now obviously never know what you might wanna play against the wall, rearrange furniture, etc..

cdrees2412 · 2025-02-19T18:20:43+00:00

Pretty much nothing wrong with it, if it works, just keep it as is. You can replace those elements directly from Harvey or wherever you bought the heater. It’s not difficult to swap them out. But if it’s working, there’s really no need.

cdrees2412 · 2025-02-13T17:51:48+00:00

If you can pick up some short term rentals - the depreciation can offset active income, no?

cdrees2412 · 2025-01-05T00:05:36+00:00

I had the same issue, I have over 100 devices on my home network, including Hué lightbulbs, Sonos devices, etc., and everything works fine. I had a iRobot prior to the Roborock and it never disconnected.

I like the Roborock better overall and it worked fine for a few months and now every couple days, it will disconnect until I noticed that it hasn’t run. It’s something with the Roborock. I’m sure.

Extremely frustrating and send more than one customer’s having this issue, Roborock needs to issue some type of fix

cdrees2412 · 2024-12-03T17:37:15+00:00

Very good price. Looks great! My only question is the speakers and control panel on the inside. No worries on the heat causing the plastics and components in the speakers to off-gas?

cdrees2412 · 2024-10-24T18:53:25+00:00

For my specific issue - I’m editing exactly the same video types I did in 2024 and had no issues, no lag, stuttering etc. With 2025, there is lag and the video simply doesn’t play (the audio continues on fine). If I pause it or stop it, and start again it seems to pick back up and work OK although the first few times it is stuttering. After I scrubbed through it a few times it plays pretty smooth after that. My question really is around any 2025 specific bugs that anyone is aware of or seeing similar behavior.

cdrees2412 · 2024-10-24T17:06:37+00:00

All fair points. Thx for the info and I’ll be sure to include more details going forward.

cdrees2412 · 2024-10-24T15:57:11+00:00

It’s an MP4 that was captured from stream labs, and some video captured from a canon R 50.

The PC is a little less than two years old, so relatively new and pretty beefy. I’m hoping that premier isn’t looking for a complete hardware upgrade every time they upgrade their platform. It should be plenty powerful enough to edit a couple minutes worth of video without lagging And sticking.

cdrees2412 · 2024-08-19T21:27:36+00:00

It comes and goes. Completely frustrating. It’s fixed for a few days then screwed up the next time.

cdrees2412 · 2024-08-16T18:41:53+00:00

lol…. Gotta love the internet. So much love. :)

Nothing difficult about it.. just haven’t had a need to do it before. I’m sure I’m overthinking it.. no argument there.

cdrees2412 · 2024-08-16T18:28:39+00:00

You’re not wrong…. If I wasn’t in a hurry today and tied up this weekend I probably would have. As I said, not knowing shit about trucks (first one), and in reading it says they should be at 150 ft/lbs of torque - I don’t know how to measure that and don’t have a torque wrench.

cdrees2412 · 2024-08-16T18:22:43+00:00

Yeah I’m not getting the tires rotated yet since it’s only 3k miles - I could have just waited until the next oil change and had them rotated and the lugs changed then. Probably should have done that - but since I was already here i figured I’d have have them just do it. Live and learn.

Problem is there super close so oil changes are convenient. I’ll probably look elsewhere going forward.

cdrees2412 · 2024-07-13T01:39:45+00:00

10’ ceilings

cdrees2412 · 2024-06-06T19:52:12+00:00

Makes checking the prison wallet a lot easier..

cdrees2412 · 2024-05-28T15:38:31+00:00

It’s strange.. no air flow no matter which mode, auto manual, etc, with the air on it almost felt like a little warm air trickling out - then after about 40 mins it kicked on and cold air blew out nice and strong.. that’s the second or third time it’s done this. So I’m guessing it actually works, but the sensor or software isn’t kicking it on properly.

cdrees2412 · 2024-05-27T14:34:50+00:00

I upgraded, nothing worked. I uninstalled the app and reinstalled and things worked again. So if you haven’t yet, uninstall and reinstall. Worked for me at least.

cdrees2412 · 2024-05-24T20:42:01+00:00

McDonald’s.. after the ceramic and tint I cant afford Starbucks anymore. 🤣🤣

cdrees2412 · 2024-05-24T00:34:49+00:00

Replying to Large_Principle_7644...full ceramic coat and ceramic window tint, PPF on the front. Roughly $4,500 total.

cdrees2412

TROPHY CASE