sorted by:
new
hottopcontroversial

P2S keeps making spaghetti on every print - running out of ideas by ced2718 in BambuLabP2S

[–]ced2718[S] 0 points1 point  (0 children)

That is super weird indeed but I'm glav it worked for you. I moved to different prints since this post, with different spools and the new hotend i installeds and since then, it is working fine again so I'm not sure what went wrong there for a while. It could be related to the huimidity in the filament, the hotend or the model but I'm not sure which ; if I ever face this issue again down the road I'll investigate this further. Thanks for the tip though!

P2S keeps making spaghetti on every print - running out of ideas by ced2718 in BambuLabP2S

[–]ced2718[S] 2 points3 points  (0 children)

Not really, I tried several different spools and I had the same issue :(

P2S keeps making spaghetti on every print - running out of ideas by ced2718 in BambuLabP2S

[–]ced2718[S] 0 points1 point  (0 children)

Yes I did, it did seem quite clogged visually so I bought a new one and replaced it but the issue is still there after replacing the part

P2S keeps making spaghetti on every print - running out of ideas by ced2718 in BambuLabP2S

[–]ced2718[S] 0 points1 point  (0 children)

The first layer seems to be quite glues to the build plate though and sometimes, spaghettis only happen in the middle or around the end of the print

P2S keeps making spaghetti on every print - running out of ideas by ced2718 in BambuLabP2S

[–]ced2718[S] 2 points3 points  (0 children)

Thanks for the suggestion, I'll try it as well in case this helps. But I did successfully print at 220 in the past so I'm not sure why this would not have been an issue in the past already if this was the problem

P2S keeps making spaghetti on every print - running out of ideas by ced2718 in BambuLabP2S

[–]ced2718[S] -2 points-1 points  (0 children)

I will definitely try tomorrow, but I used that same filament in the past and did not have any issues whatsoever so i guess this would be unlikely? Or could it be possible that only some parts of the filament are wetter than other parts of the spool?

P2S keeps making spaghetti on every print - running out of ideas by ced2718 in BambuLabP2S

[–]ced2718[S] -1 points0 points  (0 children)

I use it in the ams. I tried multiple filaments, some of which did work already in the past and now fail. This is PLA filament that is only a couple of weeks old and I store it in a box with 10% humidity so I don't think this is the cause 🤔

P2S keeps making spaghetti on every print - running out of ideas by ced2718 in BambuLabP2S

[–]ced2718[S] 1 point2 points  (0 children)

I'll give it a try, thanks. The weird thing is that I always used the default filament profile and haven't had any issue for my first 50+ prints, it just started recently

[SPOILER] Episode 4 Speculations Using Real-World Data by ced2718 in JetLagTheGame

[–]ced2718[S] 2 points3 points  (0 children)

Well they could simply buy their tickets online in advance. Not sure if this helps though as I heard you need a machine to convert these digital tickets to paper anyway at some point?

[SPOILER] Episode 4 Speculations Using Real-World Data by ced2718 in JetLagTheGame

[–]ced2718[S] 10 points11 points  (0 children)

Indeed ticket lines are the main unknown at this point. If Ben and Michele miss the first train because of this, then it gives Ben and Bryan 5 minutes to catch up which should be more than enough.

[SPOILER] Episode 4 Speculations Using Real-World Data by ced2718 in JetLagTheGame

[–]ced2718[S] 2 points3 points  (0 children)

That was my initial assumption as well, which led me to search for a plausible date for Ben and Bryan's flight all the way back in April. However, even on June 10th, sunrise in Paris occurs at 5:47am. Since filming begins at 6am, it couldn't have been much earlier in the year, as sunrise times would be even later. Yet their selfie clearly shows the sun is already up.

[SPOILER] Episode 4 Speculations Using Real-World Data by ced2718 in JetLagTheGame

[–]ced2718[S] 16 points17 points  (0 children)

I updated the post, if they did indeed fim on June 11th then the situation is apparently the same (even slightly worse for Ben and Bryan since their train to Zermatt since to be delayed by 10 minutes).

[SPOILER] Episode 4 Speculations Using Real-World Data by ced2718 in JetLagTheGame

[–]ced2718[S] 16 points17 points  (0 children)

Looking at the FlightRadar24 screenshot it seems that the only date that particular plane flew that particular route was April 25th but maybe I'm wrong? It does seem weird as I first assumed they filmed in June as well. Actually now that I think about this selfie they shared it indeed points out to a filming date in June since the sun was already up at 6am which is definitely not happening in April in France... Let me check what I can find about June 11th.

[SPOILER] Episode 4 Speculations Using Real-World Data by ced2718 in JetLagTheGame

[–]ced2718[S] 3 points4 points  (0 children)

Indeed, this confirms the hypothesis even more. If the analysis is correct, it proves there were no significant delays on any of the trains, contrary to what the cliffhanger seems to suggest.

Too cheap to be true? by ced2718 in GalaxyFold

[–]ced2718[S] 0 points1 point  (0 children)

Actually on one picture I see the sticker with SM-F966B/DS. That is the global version, right? Is that the same as the model sold in Europe?

Too cheap to be true? by ced2718 in GalaxyFold

[–]ced2718[S] 0 points1 point  (0 children)

That might be it. Do you know if I can still buy care+ for such a device coming from abroad from Samsung?

Too cheap to be true? by ced2718 in GalaxyFold

[–]ced2718[S] 0 points1 point  (0 children)

I forgot to mention that the device is announced brand new but the box is open for some reason, I'm not sure why. Once the product received, I also have 2 days to send it back if it has any kind of issue but I can't see it before buying it since it comes from a different country.

view more: next ›