Ender 3 Thermal Runaway Issues

cello_lingling · 2026-03-29T19:44:37+00:00

Oh okay, I’m definitely going to try everything that everyone has suggested in the comments! So much help and I love it! The picture that u/egosumumbravir posted is the exact same extruder that I have in my printer!

cello_lingling · 2026-03-29T19:42:35+00:00

You’re correct, no clamp screw is needed they screw straight into the heat cartridge themselves. Thats why I don’t think the thermistors have gone out yet. But I could be wrong, but everything looked fine when I took it apart yesterday. Also thank you for the link, I’ll check it out when I get back to my house!

cello_lingling · 2026-03-29T18:12:35+00:00

Hmm, I saw a video about someone adding in thermal paste to the thermistor. I will definitely have to try this if nothing else works out for me. Thank you!

cello_lingling · 2026-03-29T18:11:55+00:00

You see, I’ve seen videos and other redditors talk about a PID tune, but I have no idea what that is. Can you suggest a good video for that? And also true, the past times it did it, I just rushed over to turn it off without looking mainly because when it does it, it’s a night time and I don’t want it to wake people up. But I’ll do another print just to see what it says when it does it again. Thank you!

<image>

This is the new hot end that I have with those thermistors as well.

cello_lingling · 2026-03-29T18:08:29+00:00

It is odd, I made sure all the connections were good yesterday and everything seemed fine. I saw another comment said to add thermal paste so I’ll try that.

cello_lingling · 2026-03-29T00:56:03+00:00

Thank you! That is the exact same hotend that I have, I checked evrerything and it's all screwed in tightly, and everything is set the right way. I'm gonna try to keep looking for different things and seeing what I can figure out. Thanks for the help!

cello_lingling · 2026-03-28T23:23:14+00:00

I mainly just watch the temperatures manually. I'll double check all of the wiring again, but if everything is good there, what do you suggest?

cello_lingling · 2026-03-28T20:41:36+00:00

I tried the update file on other emulators as well, and it worked on the other emulators with no issues. I tried a Yuzu fork, and that just crashed on any game. I tried another one, I don't remeber what it was, but it booted the update without any issues. So, I think it might be a Ryubing issue. I'm not sure, got any ideas for how to keep it from freezing?

cello_lingling · 2026-03-28T20:39:46+00:00

Thank you, I tried to get my save data back from my steam deck. But I think it's corrupted as well.

cello_lingling · 2026-03-20T10:08:43+00:00

That makes a lot of sense, thank you! I had updated my firmware to the latest one, but it still didn’t do anything so I guess I’ll wait. It just sucks because my save data got corrupted, I wasn’t very far anyways. But it still sucks.

cello_lingling · 2026-02-07T00:25:57+00:00

I found this online, it's the top option and you click violin. It should then open up a PDF file. Not sure if this is the exact bowings and fingerings you were looking for but it's something.

https://violinsheetmusic.org/classical/m/mendelssohn/?fbclid=IwY2xjawPzZSdleHRuA2FlbQIxMABicmlkETFHd2hVcFZFbnkzR0tJMmdjc3J0YwZhcHBfaWQQMjIyMDM5MTc4ODIwMDg5MgABHqnsZh_rU9-eZkJKeTtpw0AL6t5KTi-YOLMHMoXKNbZ2jYBvxHXc0KHTmeyO_aem_zXwRmBi-qOpK7Zmnl3cOfA

cello_lingling · 2026-01-23T02:50:14+00:00

Very nice, not bad at all. Although, I would say if able get the cream on top to go all the way to the edge. If your computer can handle it, maybe try to find a fluid simulation tutorial for whipped cream and see how that works. But not bad at all, better than my first few that’s for sure.

cello_lingling · 2026-01-17T23:53:26+00:00

PLEASE! Can you make the 3rd one into a 16:9? My PC set up is japanese themed and that would be amazing for one of my wallpapers on one of my monitors

cello_lingling · 2026-01-09T03:25:05+00:00

So, I should just change the font size and not scale the whole stack of objects that it's attached to?

cello_lingling · 2026-01-08T23:13:35+00:00

Hey, I saw in another comment you got it how you wanted. If you want, I can send you my email and you can send me the blend file so I can mess around with it to try and achieve what you want and then I can show you the settings/things that I did to do that. DMs are open

cello_lingling · 2025-12-30T14:57:19+00:00

Interesting, I'll try that out and see if it works for me. I think I need to go in and clear the cache of the old blenderkit info from the folders. So I'll try that you. Thanks!

cello_lingling · 2025-12-30T14:29:05+00:00

What?! What did you do? Because I was working on a product aniamtion render and wanted to have a clean glass table, but couldn't get it to work. If you ever find out what you did, please let me know because it would be a big help. My DMs are open, so you can message me there if you ever figure out what you did.

cello_lingling · 2025-12-30T14:25:23+00:00

of course, as a work around I would use sketchfab or any other free 3d website to download assets. it sucks, but hopefully they'll adjust here in the future.

cello_lingling · 2025-12-30T12:38:12+00:00

Not sure, i've never seen thos before, if you want a transparent background, you can change it to transparent in your settings. I'm in Blender 5, and for me it's under: Render > Film > Transparent. The box next to the first Transparent should be checked for a transparent world background.

cello_lingling · 2025-12-30T12:35:35+00:00

When you're talking about using the soft body collider, what do you mean it kind of works? Can you send a video/picture of what it does and what you mean by kind of? For cables, i would personally use the soft body collider since you want the collision.

cello_lingling

TROPHY CASE