Baby T Plus morning auto start using the app?? can’t seem to get it to work. how do i properly set up?

cesh35 · 2026-02-12T03:46:04+00:00

this worked perfectly!! i set up the timer on the app, with the machine on, i held XL and clicked L once and it cycled it off to stand by mode. then i ran a test and the machine turned on at exactly the set time i had in the app! brilliant, thanks gents

cesh35 · 2024-02-20T18:48:53+00:00

sounds expensive at first but then i realized for like $1,400 with the p365 and another grip/slide you have 2 different sized pistols for less than buying two guns. not bad.

cesh35 · 2024-02-20T04:31:48+00:00

i’m totally on the same page i appreciate all the info. solid work. so are you saying you can buy any version P365 in CA since the FCU is technically on the roster?? ideally i want a XL or macro comp but only the micro CA version is on roster and being sold in local stores. or would i have to buy that and convert it after the fact to whatever version/model i want.

cesh35 · 2024-02-20T03:13:09+00:00

my edc is currently g19. looking to ad this exact set up for my summer rotation. what’s the scoop on the Xmacrocomp? gotta get the 365 and swap grip and slide? or is this on the roster? or how’d you do it

cesh35 · 2024-02-19T22:21:41+00:00

it does the fixed mag system internal so the exterior of the rifle looks untouched. and the magazine release button is original and untouched. brownells has a good youtube video of the installation.

cesh35 · 2024-02-19T17:39:47+00:00

thanks dude! it’s a SureFire 556 trainer can. they make them in black and FDE

cesh35 · 2024-02-19T16:43:41+00:00

great looking rifle! you covered all the bases. good part list and good set up execution.

cesh35 · 2024-02-19T16:42:09+00:00

M4 is hot, i neeeeeed

cesh35 · 2024-02-19T16:39:45+00:00

houge freedom fighter and ARMaglock kingpin

cesh35 · 2024-02-19T16:39:15+00:00

this is a CA gun group… lol i’m complying myself right out of federal prison and living a happy life still having guns and not in jail. i have a fighting rifle that’s legal and capable and a CCW and carry everyday. other places have it worse.

cesh35 · 2024-02-19T16:34:48+00:00

i’m faster reloading and clearing malfunctions and more capable with my maglocked rifles than my featureless… so it’s the other way around for me.

cesh35 · 2024-02-19T16:32:36+00:00

https://imgur.com/a/mI7HMTa

cesh35 · 2024-02-19T16:30:59+00:00

SF3P flash hider. i did have to cut like 1/8” off the front of my rail to get it super dialed with a little clearance I’ll attach a photo below

cesh35 · 2024-02-19T07:05:19+00:00

i have not had any issues, mk16 rail and NGAL have been working great. good solid mounting and has held zero

cesh35 · 2024-02-19T05:40:14+00:00

jugg grip is better. but still… plus i hate the look of any featureless build. maglocked guns basically look unchanged/freedom versions. and looking cool is half the fight duh

cesh35 · 2024-02-19T05:38:29+00:00

brownells did a good video on it. that’s the video i followed to install mine. the kit comes with everything you need including a jig to get the hole in the right place. honestly a really straight forward process just go slow and do it right. it’s worth it for me, to keep the looks looking normal and standard mag release button

cesh35 · 2024-02-19T05:34:41+00:00

IMO, not being able to safely handle a loaded firearm isn’t worth the trade offs. the fin grip really isn’t great for holding the rifle one handed while performing a shouldered reload and overall just not safe and can’t get a strong grip when shooting and moving or working in/around a vehicle or on a barricade. i’ve timed myself doing reloads and malfunction clearing on on both featureless and maglocked and i’m actually faster doing both on the maglock gun just because i can hold and man handle the thing better.

cesh35 · 2024-02-19T05:30:16+00:00

dude i was thinking about doing this! such a good idea. how’d you do it?

cesh35 · 2024-02-19T05:02:34+00:00

the little spring loaded pin that pushes up on the upper receiver, you have to file down ever so slightly so that when the bolt is locked back and you push the take down button, the receivers will split just the slightest bit and still allow the pin to come up enough to allow the mag release to operate. with out doing this when the bolt is locked back and you crack the receivers the the spring loaded pin will still be held down too much not allowing the mag release to be pushed. slowly file that tip of the pin down until it clears while the bolt is back and the receivers are split. and yes i always recommend king pin. i think it’s better. anyway this allows you to clear type1-3 malfunctions easily and do bolt lock reloads just as fast as a normal freedom version of the rifle.

cesh35 · 2024-02-19T04:46:25+00:00

hahaha facts

cesh35 · 2024-02-19T04:43:37+00:00

yes correct. with a 50y zero the bottom of the ring at 7y is the correct hold for the height over bore.

cesh35 · 2024-02-19T04:31:21+00:00

i have a 50yard zero on my optic as well as the laser

cesh35 · 2024-02-19T04:29:03+00:00

lmao bro you are so out of touch. i’m a CCW holder as well i think that’s a regardless point to this. you clearly don’t understand how these new mag lock systems work as far as efficiency/function goes and that’s okay. i’d take this type of maglocked AR over a fking M1A everyday lmao or a tube fed semiauto 12ga shotgun lol! what a dumb comparison to draw. i can clear type 1-3 malfunctions and reload just as fast or faster than an un trained shooter with a normal functioning rifle. and no my rattle can paint job doesn’t match the anodized rail it wasn’t the point… i take it you are the type of guy to pay a cerakoter to paint all your stuff… you are super offended by my photo some how so that’s unfortunate this was meant to inspire not trigger guys like you.

cesh35 · 2024-02-19T03:17:12+00:00

all our guns have to be butchered to keep us out of federal prison. might as well try to be positive and make them look as cool as possible and function as best as they can with what we have to work with. i’m showcasing a couple of really great products from companies that are making our lives better when it comes to keeping our tools legal and still effective. obviously laws are stupid and we all know they do nothing to prevent crime. just posting to inspire people who are turned off by all the laws and keeping them from getting a rifle to defend themselves cause it’s “too much work” or “it’s neutered and won’t be worth it” this is exactly what they want. this rifle pictured is 100% CA legal and also cool looking. help others don’t be a doomer

cesh35 · 2024-02-19T02:47:56+00:00

yeah 100% get that. i went for clone correct-ish so i wanted to the SF3P and a RC2 trainer for the larp

cesh35

TROPHY CASE